Nikon JAA79551 Operating instructions
INC
作成承認印 配布許可印
JAA79551-R.3690.A
Copyrigh ｃ2006 by Nikon Corporation.
All Rights Reserved.
無断転載を禁ず
!!
Printed in Japan October 2006
Ｍ
サービス
計画課
AF-S VR ZOOM NIKKOR ED
70-300 / f4.5-5.6G
JAA79551(MADE IN THAILAND)
REPAIR MANUAL
INC
JAA79551-R.3690.A
- Ｍ ･ AF-S VR 70-300/4.5-5.6G -
Specications
Type of lens: G-type AF-S Zoom-Nikkor lens with built-in CPU and Nikon bayonet mount
Focal length: 70mm–300mm
Maximum aperture: f/4.5–5.6
Lens construction: 17 elements in 12 groups (2 ED lens elements)
Picture angle: 34°20’-8°10’ [22°50’-5°20’ with Nikon digital cameras
(Nikon DX format); 27°40’-6°40’ with IX240 system cameras]
Focal length scale: 70, 100, 135, 200, 300mm
Distance information: Output to camera body
Zoom control: Manually via separate zoom ring
Focusing: Nikon Internal Focusing (IF) system (utilizing an internal Silent Wave Motor);
manually via separate focus ring
Vibration reduction: Lens-shift method using voice coil motors (VCMs)
Shooting distance scale: Graduated in meters and feet from 1.5m (5 ft.) to innity (∞)
Closest focus distance: 1.5m (4.9 ft.) at all zoom settings
No. of diaphragm blades: 9 pcs. (rounded)
Diaphragm: Fully automatic
Aperture range: f/4.5 to f/32 (at 70mm), f/5.6 to f/40 (at 300mm)
Exposure measurement: Via full-aperture method
Attachment size: 67mm (P = 0.75mm)
Dimensions: Approx. 80mm dia. x 143.5mm extension from the camera’s lens mount ange
Weight: Approx. 745g (26.3 oz)
Specications and designs are subject to change without any notice or obligation on the part of the manufacturer.
INC
JAA79551-R.3690.A
- Ｄ ・AF-S VR 70-300/4.5-5.6G -
※Before Disassembly / Reassembly / Adjustment
Caution:
①In desassembly/(re)assembly, be sure to use conductive mat (J5033) and wrist strap (J5033-5), in order
to protect electric parts from static electricity.
②When disassembling, make sure to memorize the processing state of wires, screws to be xed and their
types, etc.
③Because prototypes are used for "Disassembly/(Re)assembly/Adjustment", they may differ from the
actual products in forms, etc.
④Because pictures are processed by a special method, they may differ from the actual ones in texture.
・Lead-free solder is used for this product.
・For soldering work, the special solder and soldering iron are required.
・Do NOT mix up lead-free solder with traditional solder.
・Use the special soldering iron respectively for lead-free solder and lead solder.
They cannot be used in common.
Points to notice for Lead-free solder products
Whenever the 2nd lens-group unit of this lens is removed, replace it with the new
2nd lens-G holding tube of RP. After reassembly, the optical lens-alignment work
becomes necessary.
At service facilities where such work cannot be carried out, do NOT remove the
2nd lens-group unit.
On this lens, the VR (vibration-reduction) unit (inside the 3rd lens-group unit) is mounted to correct the
picture blur.
In order to maintain the functional accuracy of the picture blur correction, if detaching the VR (vibration-
reduction) unit (inside the 3rd lens-group unit) and gyro-FPC or if removing the main base plate unit, be sure
to adjust the VR by using the VR lens adjustment equipment (J15380).
However, if disassembling the parts except the above, the VR adjustment is NOT necessary.
At service agencies where the "VR lens adjustment equipment" is not prepared, do NEITHER disassemble
NOR repair the products of the above case.
INC
JAA79551-R.3690.A
- Ｄ ・AF-S VR 70-300/4.5-5.6G -
#92×3
1. Disassembly
Rear cover ring
Rear cover ring
G1 unit #82
G1 unit
INC
JAA79551-R.3690.A
- Ｄ 3・AF-S VR 70-300/4.5-5.6G -
② Set the focus ring to "∞", and the zoom ring to TELE "300", then insert the two innity pins ( ★J11339) to
the two holes.
G2-G3 unit, 2nd lens-group unit
①Remove the hole cover sheet.
Zoom rubber
Zoom rubber
Hole cover sheet
★: New tool
Innity pin（★ J11339)×2
Caution:
When the hole cover sheet is removed,
be careful NOT to damage the lens.
INC
JAA79551-R.3690.A
- Ｄ 4・AF-S VR 70-300/4.5-5.6G -
③Insert the two pin-parts of G2-G3 unit assembling tool ( ★J11337) into the two holes of G2-G3 unit. Then
rotate and remove G2-G3 unit.
④Remove the tool pins that were set in ②.
⑤Remove the washer (#62 : selected from A ～H).
⑥Peel off the sheet (#133) from the 2nd lens group.
⑦Take out three screws (#110), and remove the 2nd lens group.
#110×3
#133
#62:A ～H
Caution 1:
Whenever the 2nd lens group is removed, optical
alignment work becomes necessary after reassembling.
Therefore, at service facilities where this work cannot
be performed, do NOT remove the 2nd lens group.
Caution 2:
Whenever the 2nd lens group is removed, replace it
with the new 2nd lens-G holding tube (refer to page
D20) which is prepared as RP.
G2-G3 unit assembling tool
（★ J11337）
★：New tool
G2-G3 unit
Pin ×2
2nd lens-G unit
INC
JAA79551-R.3690.A
- Ｄ 5・AF-S VR 70-300/4.5-5.6G -
#125×2
#65
#125×2
#65
#126 #126
Zoom coupling lever
①Peel off the two cover sheets (#126).
② Take out four screws (#125), and remove the two zoom coupling levers (#65).
Zoom cover ring
INC
JAA79551-R.3690.A
- Ｄ 6・AF-S VR 70-300/4.5-5.6G -
Zoom ring, Zoom cover ring
Lens body
Zoom ring
③ Remove the zoom ring from the zoom
cover ring.
② Peel off the three pieces of the xing
tape (#111).
Zoom ring
① Rotate the zoom ring until its "300"-mark is positioned approx. 1-cm away from the zoom index. Then
remove the zoom ring from the lens body.
# × 3
Zoom cover ring
INC
JAA79551-R.3690.A
- Ｄ 7・AF-S VR 70-300/4.5-5.6G -
#103
#90
#90
Contacts unit
・Take out two screws (#90), and remove the contact unit.
Contacts unit
Slack of Change-SW unit
・Take out the screw (#103) of the change-SW unit, and leave the unit slightly slackened.
Change-SW unit
INC
JAA79551-R.3690.A
- Ｄ ・AF-S VR 70-300/4.5-5.6G -
#92×3
#93
#97×2
#84
#83:A ～I#96
#23 #94
#95
#28
#30
#25
①Take out the three screws (#93) and one screw (#93), and remove the bayonet mount.
②Remove the washer (#83 : selected from A -I).
Bayonet mount
Bayonet mount
Table of contents
Other Nikon Camera Lens manuals
Nikon
Nikon AF-S OX Zoom-Nikkor ED 12-24mm f/4G IF Operating instructions
Nikon
Nikon AF-S NIKKOR User manual
Nikon
Nikon NIKKOR Z 58mm f/0.95 S Noct Guide
Nikon
Nikon Micro-Nikkor 200mm f/4 IF User manual
Nikon
Nikon AF-S NIKKOR 24-70mm f/2.8G ED User manual
Nikon
Nikon AF-S NIKKOR 24-70mm f/2.8G ED User manual
Nikon
Nikon NIKKOR Z 135mm f/1.8 S Plena User manual
Nikon
Nikon AF-S DX Micro- Nikkor 40mm f/2.8G User manual
Nikon
Nikon Lenses AF Fisheye-Nikkor 16mm f/2.8 User manual
Nikon
Nikon AF-S DX Nikkor ED 55-200/4-5.6G Operating instructions
Nikon
Nikon NIKKOR User manual
Nikon
Nikon AI Micro-Nikkor 105mm f/4 User manual
Nikon
Nikon Nikkor 28mm f/2.8 User manual
Nikon
Nikon AF-S NIKKOR 200mm f/2G ED VR II User manual
Nikon
Nikon AF-S Nikkor 300mm f/2.8G ED VR II User manual
Nikon
Nikon 55-200mmf/4-5.6 ED User manual
Nikon
Nikon AF Nikkor 24-85 Operating instructions
Nikon
Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G... User manual
Nikon
Nikon AF-S Micro NIKKOR 60mm f/2.8G ED User manual
Nikon
Nikon AF-S Micro NIKKOR 60mm f/2.8G ED User manual
Popular Camera Lens manuals by other brands
Sony
Sony VCL-ST30 operating instructions
Canon
Canon FD 35 - 70 mm instructions
Sony
Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... operating instructions
ARRI
ARRI Lenses brochure
Panasonic
Panasonic LUMIX G X Vario 45-175mm f/4.0-5.6 operating instructions
Rokinon
Rokinon DS50M-C instruction manual
