NGTeco NG-C2200 User manual
Model: NG-C2200
Version: 1.0
User Manual
Important Notes
1.
2.
Please make sure the device is connected to the power and
your phone is connected with Wi-Fi.
Routers: If the router is a dual-band router the device does not
support 5GHz network, please select a 2.4GHz network to add
the device. You also need to enable the router broadcasting
function.
4. Check whether the devices connected to the router have
achieved the maximum number. If so, please try to turn off the
Wi-Fi connection of some devices.
5. Make sure the router wireless MAC filtering function is enabled.
6. Remove the device from the filter and make sure that the
router is not prohibiting the device from the connection.
7. Make sure the entered Wi-Fi password is correct when adding a
new device.
Wireless Router: Set the encryption method as WPA2-PSK and
authorization type as AES or set both as Auto. Please name the
Wi-Fi router in English. To achieve better connectivity, please
keep the device and router within a certain distance.
3.
If you have any questions about using the product, please call our
technical support number, Call: +1 (770) 800-2321 Mon-Fri:
6:00am-9:00pm (EST ).
8. When the equipment is connected and working, try to keep
the signal value of the equipment above 70%. You can choose a
good network broadband, branded routers, and a short
connection distance, as far as possible barrier-free shielding.
9. Due to regular upgrades of systems and products, NGTeco
could not guarantee exact consistency between the actual
product and the written information in this manual.
Table of Contents
Product Overview.......................................................................1
What's in the Box........................................................................1
How to Setup..............................................................................2
Connecting the Camera to NGTeco Home App......................................2
Connecting the Camera to Amazon Alexa or Google Assistant........7
Watching the Videos from PC.....................................................8
Installation Diagram..................................................................8
Product Features........................................................................9
Main Interface....................................................................................................9
More Settings..................................................................................................10
1
What's in the Box
P&T Camera Adapter
User Manual
Product Overview
Screw Sets
X3
Micro USB Cable
TFCard Slot
Reset Button
Alignment Sticker
Model: NG-C2200
Version: 1.0
User Manual
22
How to Setup
Connecting the Camera to NGTeco Home App
Step 1: Download the App and Register Your Account
Search the App in Apple App Store or Google Play NGTeco Home
Store and download the app to your mobile phone.
Open the App and log in with your account. If you NGTeco Home
do not have an account, create an account with your phone
number or Email ID.
Step 2: Power on the Camera
Plug the camera into the power socket using the provided power
adapter. Wait for a few seconds until you hear the prompt, and
then the red LED blinks rapidly.
Note: If you did not hear the prompt, please press and hold the
“ ” button until you hear the prompt and see the red LED Reset
blinks rapidly. Please connect the camera to the app within three
minutes after reset.
Step 3: Add the Camera to the App
Method 1: Connecting by Scanning the QR Code
Open the app, tap the “ ” button on the top right corner of the +
interface, and then select the “ ” option and then Smart Camera
choose the corresponding model purchased.
1
You are advised to enable Bluetooth. Enable Bluetooth to
Add Wi-Fi devices easily.
Note: 1.
Place the camera close to the router.
2.
3
Tick if you have finished the above steps on the interface, and
then tap the “ ” button. Select the desired Wi-Fi and enter Next
the correct password. Then tap the “ ” button.Next
2
Show the QR code towards the camera lens, and the camera
will scan the QR code. Once you hear the prompt and see the
green LED flashing. Tap the " " button on your I Heard a Prompt
mobile, the App will connect the camera automatically.
3
4
Note: Please hold the phone about 15-20 cm (6–8 inches) away
from the camera. You can slightly move your mobile device
forward and backward for better scanning.
Once you see the message “ ” on the Added successfully
mobile app, you can edit the name of the camera manually. Tap
the “ ” button to complete the setup.Done
4
5
Method 2: Connecting by EZ Mode
Open the app, tap the “ ” button on the top right corner of the +
interface, and then select the “ ” option and then Smart Camera
choose the corresponding model purchased.
1
Tap on the top right corner to change Net Pairing Mode to “EZ
Mode”. Tick if you have finished the above steps on the
interface, and then tap the “ ” button.Next
2
Once you see the message “Added successfully” on the
mobile app, you can edit the name of the camera manually. Tap
the “Done” button to complete the setup.
4
6
Enter the Wi-Fi password, click to enter the Wi-Fi quick OK
connection network interface, then it will automatically search
for the device.
3
Note: Make sure that the camera and the smart phone are close to
the router.
Connecting the Camera to Amazon Alexa or
Google Assistant
Tap the button on the upper right corner of the device Settings
interface. Select the Amazon Echo or Google Home icon, then
follow the on-screen instructions to link your NGTeco Home
Account to Amazon Alexa or Google Assistant.
After completing the setup, you can use the supported voice
commands that include:
Alexa, show the front door.
OK Google, show the front door.
Note: For renaming the linked camera or linking a new camera
with Amazon Alexa or Google Assistant, please discover the device
again.
7
Table of contents
Popular Camcorder manuals by other brands
Panasonic
Panasonic AG-HMC152EN operating instructions
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p user guide
MYDLINK
MYDLINK DCS-6100LH Quick installation guide
Sony
Sony video Hi8 Handycam CCD-TR555 operating instructions
SECURECOM
SECURECOM V-5014B installation guide
Panasonic
Panasonic HDC-SD100 operating instructions
