5
Functions LED screen
Repeat All CA
Random CS
Repeat Folder FD
Repeat One CR
FUNCTION OPERATING
1. Play/Pause: In the play status, press can play
music or stop playing. If display ”PAUSE”; press this
button again to enter into main interface;
2. Looping modes: Long press can change the
looping mode. 4 looping modes optional: All,
Random, Fold, One and INTRO.
Displays on main interface: LED screen display: All,
Random, Folder all, One, INTRO
3. Select music: Short press button / or press the
numeric keys on the remote controller directly. If the
digits larger than the amount of songs in the U disk /
SD card / TF card, the machine will display “ERROR”.
4. Change frequency:
Increase frequency: Press CH+, short press this
button, frequency increase 0.1; Long press it (0.5
second), frequency increase 1.0.
Decrease frequency: Press CH–, short press this
button, frequency decrease 0.1; Long press it (0.5
second), frequency decrease 1.0.
Quick setting frequency (Numeric input setup): Use
the numeric keys on the remote controller to set up
the frequency.
E.g.: If you want to set up the frequency as 107.9MHz, it
just needs to press CH and then input the digits: 1, 0, 7,
9 within 3 seconds to finish the setup.
If you want to set up the frequency as 87.5MHz, just
press CH and then input digits 8, 7, 5 within 3 seconds
to finish the setup.
