7 Commissioning with app
The requirement for commissioning via app is a mobile end device (smartphone, tab-
let) with Bluetooth interface, running the Android or iOS operating system. The app
guides you step by step through the commissioning process.
Prerequisite for scenes and positioning movements is that the moving times of the
connected blind/shutter in the actuator are saved.
￭ Download and install the NEXENTRO Config app from the iTunes App Store
(iOS) or Google Play Store (Android).
App functions
– Joining an existing network and leaving a network
– Setting up your own network
– Assigning device names
– Group control: Select blind actuators that are to be controlled analogue
– Set the device parameters: Shutter running time, slat reversal time, reversal
time for change of running direction
– Input control: push-button or switch
– Reverse function of inputs and outputs
– Indication of the position and of the slat angle
– Indication of device information: Device type, software version
– Performing a software update
– Resetting to default setting
– Operate actuator
Registering devices in the NEXENTRO Config app
NEXENTRO devices must be registered for commissioning in the NEXENTRO Con-
fig App. To do this, the device must be set to pairing mode, which is active for ap-
prox. 1 minute after the mains voltage is switched on.
￭ Re-energise the NEXENTRO device and start the search in the NEXENTRO
Config App.
￭ Add the device to the list of registered devices.
￭ Assigning device names (optional).
￭ Setting device parameters.
Adding the NEXENTRO actuator to a Zigbee network with gateway
To connect the NEXENTRO actuator to other Zigbee devices, the NEXENTRO actu-
ator must be added to the network.
With certain gateways, adding to a network is done via the Touchlink function, see
http://www.nexentro.de/help.
Zigbee Blinds Actuator Mini
6 / 12
82403610 24.04.2023
