Newland SPEEDATA SD35 User manual

SD35 User Guide

SD35 User guide V1.0

Appearance

SD35 User guide V1.0

Keypad

Volume key

Scan key

Scanning

key

Power key

Home key

Back key

Enter key

Resent key

Function

keys

Screen off

key

Scan key

OK key

SD35 User guide V1.0

Virtual Keyboard

When the device is turned for the first time ,please Click “Setting”

-> ”system ”->”Languages&Input”->”Physical Keyboard”,and enable “Show

Virtual keyboard”.Then you can use “Virtual Keyboard”and”Physical Keyboard”

at the same time.

Quick setup

You can click the iron in the lower right corner to enter the “Change keyboard”

interface to enable “Show virtual keyboard”.

Click “Setting”->”system”->”Languages&Input”-”Virtual Keyboard”,then click

“manage keyboard”,you can manage the virtual keyboard.

SD35 User guide V1.0

Physical Keyboard

When the device is turned on for the first time,the default input of the physical

keyboard is numbers.You can switch between numbers and uppercase and

lowercase by pressing the “aA”key.

Note:Please refer to the “physical key definition” for how to use the function

keys.

SD35 User guide V1.0

SIM Card

1 Both SIM cards use standard Nano-SIM cards. Please use professional

equipment to open the SIM card warehouse, so as not to damage the

equipment and affect the protection performance.

2 When the SIM1 card is placed, the SIM1 card is placed horizontally in the

upper right corner of the second layer of the slot, which is flat with the slot, and

the SIM1 card is successfully placed.

3 When the SIM2 card is placed, the SIM2 card is placed horizontally in the

upper left corner of the first layer of the slot, which is flat with the slot, and the

SIM2 card is successfully placed.

4 Memory card slot, maximum expandable 128G memory card.

SD35 User guide V1.0

Charging&Attention

1 Please use the supplied charger and USB (Type-C) cable. Otherwise, the

fast charging mode cannot be enabled. Using a non-original charger and a

USB charging cable may result in long charging time and repeated restarts,

and affect the battery life.

2 It is recommended not to operate the devices while charging, and not to

cover objects on the device and charger.

3 When the device is in low power, there will be an indicator light and a desktop

pop-up reminder. Please charge as soon as possible to avoid affecting normal

use.

4 Please ensure that the power is about 50% when store the equipment for a

long time. Please place the equipment in a suitable environment with dry

temperature to avoid equipment failure caused by long-term storage.

5 In case of damage to the battery, charging head and charging cable, please

and cause extra loss.

Charging indicator status

Device charging indicator

Red light blinking:low-battery.

Red light on:charging in process.

Green light on:fully charged.

Cradle indicator status

Red light on:extra-battery charging in process.

Green light on:extra-battery fully charged.

Power on&Power off&Restart

SD35 User guide V1.0

1 When the device is powered off, press and hold the power button for 2

seconds.And the device will boot into the Android operating system. It takes a

long time to initialize the device. Please wait patiently.

2 When the device is powered on, press and hold the power button for 2

seconds. The system will pop-up menu and display two options:”Power off”,

and “Restart”. Choose ”Power off”or “Restart”.

3 When the device is abnormal or unable to operate, press and hold the red

power button for more than 15 seconds to force restart the device.

Locking and Unlocking the device

Lock the device:Brief press the power button on the right side of device,if no

operation is performed on the device for a preset period of time,the device will

lock automatically.You can change how long it takes the device lock.

Unlock the device:Brief press the power button on the right side of device and

slide the screen upward.If no screen method is set,you can directly enter the

system interface.If the screen method is set,you need to enter an unlock

password or pattern to enter.

Unlocking method settings:settings->Security&location->Screen

lock,Choose the unlock method you need.

SD35 User guide V1.0

Note:If you select”pattern Unlock”,please pay attention to the prompts during

setting, whether you want to use the pattern to unlock when you turn on the

device, select "Yes", you need to use the pattern you set to unlock after

restarting the device.

*If you accidentally forget the unlock pattern or password,please contact

us.*

Home Screen

Swipe up anywhere on the main screen to enter the application drawer to view

all applications.

SD35 User guide V1.0

Open an app:Tap to open an app.

Add an app iron to the home screen:Swipe up on the main screen interface

to see all applications.Tap and hold your desired app and then drag it on the

home screen.

Installing App:Use one of the following methods to install a new app on the

device.

1 Download an APK file from APP town,and install it.(Only the programs

uploaded by us, the overseas version may not have this in the future, so it is

not recommended.)

2 Install third-party app stores yourself.

3 Connect device to PC with the supplied cable.The computer transfers the

application installation package to the device, then the device opens the file

manager to find the installation package and install it. (Note that the file suffix

is .apk, it can be installed directly.)

Uninstalling APP:Long press your desired APP iron,click “App info” to enter

the app info,then click uninstall.

Table of contents

Newland SPEEDATA SD35 User manual

Popular Barcode Reader manuals by other brands