Neway CL8809NT User manual
1
2
DEAR CUSTOMERS
Thank you for purchasing the liquid crystal display monitor. This
product employs new integrate circuits and high quality TFT LCD
modules. It is putting out with its low power consumption, emits no
radiation, and other advantage characteristics. This product is
shaped with modern style and is easy to be carried with. The color
TFT LCD is the most suitable display for VGA,VCD, DVD for
motorcars and ships .It also can be used in the office ,in flat ,at
home also in other suitable position. You will certainly benefit from
this monitor in lots of ways, to name some of them: convenience,
safety, space-saving.
We hope that you will have the enjoyment of your new mini color
TFT LCD.
To ensure the best use of the unit, please read this handbook
carefully beforehand.
3
NOTICE
1. Please use the adapter attached in the accessory.
2. Do not expose this product to direct sunlight, heat or humid
conditions.
3. Keep away from strong light while using this product so as to
obtain the clearest and the most colorful picture.
4. Please avoid heavy impact or drop onto the ground.
5. Do not use chemical solutions to clean this unit. Please
simply wipe with a clean soft cloth to keep the brightness of
the surface.
6.If the product does not operate normally when the instructions
are followed. Adjust only those controls that are covered by the
instructions. Improper adjustment of other controls may result in
damage and will often require extensive work of a qualified
technician.
CONTENTS
Product description------------------------------------------
Cable connection----------------------------------------------
Menu operation------------------------------------------------
Acessories------------------------------------------------------
Parameter------------------------------------------------------
Trouble shooting-----------------------------------------------
4
Ⅰ. Products description
1 POWER: ON/OFF
2 PC/AV: PC/AV switch.
3 > :Selection key or pressing the button to change the brightness level.
4 MENU:Display MENU Key
5 <: Selection key.
6 + :Volume key or using to adjust the number of selected functionin in
menu
7 -: Volume key or using to adjust the numberof selected function in menu
8 IR Sensor
9 TFT LCD monitor
10 12V Power Input
11 SKS Cable Input
5
Remote controller
: POWER ON/OFF
: MUTE
: No use
: Display menu key
: Volume down or to adjust the number of selected function in menu
: Volume up or to adjust the the number of selected function in menu
:Program selection key or to select the function in menu
: Program selection key or to select the function in menu
: AV1, AV2, TV switch
~: Number key, no use
: Unit, double-digit, three-Picture, no use.
: NO USE
: NO USE
: NO USE
6
ⅡCONNECTION
Match calbes
※SKS cable:
126P SKS Input Jack : all kinds of AV signal input ,note that put it correctly
into the SKS input jack of the monitor
2 Black 9-pin VGA signal input jack
3 White S-video input jack
4 Black Jack :DC 12V Power input
5 Yellow RCA :Video signal 1 input
6 Red RCA :Video signal 2 input
7 White RCA :Audio signal input
※VGA cable:
1. Black 9-pin VGA connector, contact to the 9-pin VGA signal input jack of
SKS cable.
2. USB end connect the USB port of computer for touch screen function.
3. 15-pin VGA signal input end connect VGA port of the computer
7
※Connection
NOTE: When you use the unit, please adopt matched DC adapter, if not,
please note that the power consumption should be less or equal to 15w.
Ⅲ.Menu operation
After connecting, press the button “menu” on the unit or remote controller, the “main
menu” will appear on the screen,This will all you to use “</>”on the unit or “ / ” on
the remote controller to choose the subject demanded, confirm it by pressing＂menu”
then adjust the number of selected function in OSD by pressing “-/+”button on the unit or
“/” on the remote controller. All the operation of OSD is the same as mentioned
above.
※•Explanation of OSD
OSD IN AV MODE(as picture following)
8
you can press “</>”on the unit or “ / ” on the remote controller to select the item
demanded among , , , , , , , , , , (in
line: brightness ,contrast , saturation, tint , sharpness, language , reset , OSD H-
position, OSD V-position ,OSD duration, exit OSD )and the selected item’s background
will be yellow and the explanation of the item will display in the window which on the right
side of the OSD menu.
OSD IN VGA MODE(as picture following)
Picture adjustment (in order)
brightness , contrast , phase, clock , OSD H-
position, OSD V-position, reset, color temperature ,
language, miscellaneous, exit OSD
the selected item’s background will be yellow and the explanation of the item will display in
the window which on the right side of the OSD menu.
OSD color temperature※
You can choose color temperature such as: 6500 Ks, 7500 Ks or 9300 Ks. as picture
9
Otherwise you can adjust a color temperature that needs the options “USER". Then adjust
“”, “ ” and “ ” at will by pressing “-/+” of the unit or “ /” on the remote
controller. As picture following
“RED”
“GREEN”
“BLUE”
※ miscellaneous
OSD miscellaneous function means to enter into sub menu “ OSD H- position,
10
Other Neway Car Video System manuals
