New Holland T3010 User manual
PrintNo.87290735
1stedition
English12/09
OPERATOR’SMANUAL
ORIGINALINSTRUCTIONS-accordingtoDirectives2006/42/EC,AnnexI1.7.4.1
T3010
T3020
T3030
T3040
Tractors
SECTIONS SUMMARY
1 -- Introduction and safety measures
2 -- Controls and instruments
3 -- Field operation
4 -- Lubrication and Maintenance
5 -- Troubleshooting
6 -- Specifications and data
7 -- Alphabetical index
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--1
CE DECLARATION OF CONFORMITY DOCUMENT
Here above is provided copy of the ”CE” Declaration of Conformity (EC Declaration of Conformity according to
2006/42/EC).
The EC Declaration of Conformity is the manufacturer’s declaration about equipment compliance to relevant EU
provisions.
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--2
Please keep the original document in a safe place. Local authorities may require you to show this document in
order to assure compliance of your equipment.
Translation of this declaration in your own country language is provided on the original document.
HEALTH AND SAFETY RELATED STANDARDS APPLIED TO YOUR TRACTOR
•FOPS level on your tractor cab is not certified according to OECD Code 10.
•The cab is certified Category 1 according to EN 15695- 1.
•NOISE EMISSION LEVELS are rated according to 77/311/EEC.
•VIBRATION LEVELS are rated according to 78/764/EEC.
•ROPS PROTECTION is certified according to EN 15694.
NOTE: See safety section 1 in this manual for further explanation and details on above mentioned
standards and specific terminology.
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--3
METRIC AND IMPERIAL UNITS ABBREVIATIONS
TYPICAL
APPLICATIONS
RECOMMENDED
SI (METRIC) UNITS
IMPERIAL UNITS
NAME SYMBOL NAME SYMBOL
AREA
Land area hectare ha acre
square meter m2square foot
square inch
ft2
in2
square millimetre mm2square inch in2
ELECTRICITY
ampere Aampere A
volt V volt V
microfarad μF microfarad μF
ohm Ωohm Ω
FORCE
kilonewton kN pound Ib
newton N pound Ib
FORCE PER LENGTH
newton per metre N/m pound per inch Ib/in
FREQUENCY
megahertz MHz Megahertz MHz
kilohertz kHz kilohertz kHz
hertz Hz hertz Hz
FREQUENCY -- ROTATIONAL
revolution per minute r/min revolution per minute r/min (a)
rpm rpm
LENGTH
kilometre km mile mi
meter m foot ft
centimetre cm inch in.
millimetre mm inch in.
micrometer μm
MASS
kilogram kg pound Ib
gram g ounce oz
milligram mg
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--4
TYPICAL
APPLICATIONS
RECOMMENDED
SI (METRIC) UNITS
IMPERIAL UNITS
NAME SYMBOL NAME SYMBOL
POWER
kilowatt kW horsepower Hp
watt W Btu per hour
Btu per minute
Btu/hr
Btu/min
PRESSURE or STRESS (FORCE PER AREA)
kilopascal kPa pound per square inch
inch of mercury
psi
inHg
pascal Pa inch of water inH2O
megapascal Mpa pound per square inch psi
TEMPERATURE (other than THERMODYNAMIC)
degrees Celsius °Cdegrees Fahrenheit °F
TIME
hour hhour h
minute min minute min
second s second s
TORQUE (includes BENDING MOMENT, MOMENT OF FORCE, and MOMENT OF A COUPLE)
newton per metre Nm
Nm
pound foot
pound inch
Ib ft
Ib in
VELOCITY
kilometre per hour km/h mile per hour mph
meter per second m/s foot per second ft/s
millimetre per second mm/s inch per second in/s
meter per minute m/min foot per minute ft/min
VOLUME (includes CAPACITY)
cubic meter m3cubic yard yd3
cu yd
litre l cubic inch in3
litre l US gallon
UK gallon
US quart
UK quart
US gal
UK gal
US qt
UK qt
millilitre ml fluid ounce fl oz
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--5
TYPICAL
APPLICATIONS
RECOMMENDED
SI (METRIC) UNITS
IMPERIAL UNITS
NAME SYMBOL NAME SYMBOL
VOLUME PER TIME (includes DISCHARGE and FLOW RATE)
cubic meter per minute m3/min cubic foot per minute ft3/min
litre per minute l/min US gallon per minute US
gal/min
millilitre per minute ml/min UK gallon per minute UK
gal/min
SOUND POWER LEVEL and SOUND PRESSURE LEVEL
decibel dB decibel dB
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--6
SECTION 1
GENERAL INFORMATION AND SAFETY MEASURES
CLEANING THE TRACTOR
Your tractor is an advanced machine, fitted with an
electro--hydraulic control system. Care must be
taken when cleaning the tractor, especially if a
pressurised water cleaner is used.
•Never stand too close to the tractor or direct the
water jet on electrical components, seals or
intake openings, etc.
•Never direct jets of cold water at the hot engine
or exhaust. See also Section 4
(Recommendations for bodywork maintenance).
SERVICE PARTS
”Non--original” spare parts have not been tested or
authorised by the Manufacturer. Installment and/or
use of such products may adversely affect the
tractor’s design specifications, thereby
compromising operational safety. The manufacturer
cannot be held responsible for any damage resulting
from the use of ”non--original” spare parts.
No modifications may be made to the tractor without
written authorisation from the Manufacturer
WARRANTY
The tractor is guaranteed in accordance with current
legislation in your country and in line with contractual
agreements reached with the dealer at the time of
sale. However, the warranty is no longer valid if the
rules and instructions for the use and maintenance
of the tractor, described in this Manual, are not
observed.
WARNING
The engine and the fuel system of the machine are
designed and made in compliance with government
standards on limiting polluting emissions. Tampering
by dealers, customers, operators and users is strictly
forbidden by law. Failure to comply with the above
could entail government fines, re--working charges,
invalidation of warranty, legal action and possibly
confiscation of the machine until work is completed
to bring it back into its original state. Any servicing
and/or repairs on the engine must be carried out
solely by certified technicians
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--7
TRACTOR IDENTIFICATION PLATES
Serial numbers identify the tractor and its main components. The identification data must be supplied by the
dealer for requests for spare parts or service operations. Identification data is of fundamental importance in the
event of theft of the tractor. The location of the various identification data is shown below.
D
(C) Engine type and serial
number.
(Under the bonnet)
(B) Chassis type and serial
number.
The engine serial number is
stamped on the engine block.
(A) Tractor type and chassis serial
number
(panel below dashboard)
MDD1352A
New Holland
T3040
1
INTRODUCTION AND SAFETY MEASURES -- SECTION 1
1--8
MACHINE IDENTIFICATION DATA
PLATE (A)
The manufacturer’s data plate gives the following
data:
-- Manufacturer.
-- Vehicle type.
-- Road type--approval number.
-- Chassis frame number.
-- Year of manufacture.
-- Weights.
-- Engine power in kW.
-- CE Marking
other data are given on the type--approval certificate.
MACHINE IDENTIFICATION DATA (B)
The chassis frame number, as well as on the data
plate, are also punched on the front of the ballast
frame on the right--hand side.
ENGINE IDENTIFICATION DATA (C)
The engine has its own serial number stamped on
the engine identification plate.
POCKET CONTAINING THE OPERATOR’S
MANUAL (D)
Keep this manual carefully on the tractor in the
specific pocket, as shown in fig. 1.
IMPORTANT: Keep this operator’s manual carefully
on the tractor. Before driving or operating your
machine you must read this manual carefully,
especially the section dealing with safety rules.
Always keep it to hand, in the specific compartment,
for future reference.
Other manuals for T3010
1
This manual suits for next models
3
Table of contents
Other New Holland Tractor manuals
New Holland
New Holland Workmaster 45 User manual
New Holland
New Holland Workmaster 75 User manual
New Holland
New Holland TD3.50 User manual
New Holland
New Holland 4000 Series User manual
New Holland
New Holland T4.75 User manual
New Holland
New Holland Boomer 35 Tier 4B (final) User manual
New Holland
New Holland Sidewinder ll T7.220 User manual
New Holland
New Holland T9020 User manual
New Holland
New Holland T9.390 User manual
New Holland
New Holland Auto Command T7030 User manual
New Holland
New Holland CR6.80 TIER 4B User manual
New Holland
New Holland TD5010 User manual
New Holland
New Holland 8010 User manual
New Holland
New Holland ZDJD10166 User manual
New Holland
New Holland TD5050 User manual
New Holland
New Holland Boomer 1020/T1010 User manual
New Holland
New Holland 70 Series Operating instructions
New Holland
New Holland Boomer 40D CVT User manual
New Holland
New Holland T4.75F User manual
New Holland
New Holland SideWinder II User manual
