NETGEAR DGN2200v1 User manual

Version 1.1

VPN Configuration of ProSafe Client and Netgear DG Router

Prerequisites:

Software: VPNGL02 or VPNGL05 (Version 5.04)

Hardware: Netgear DSL router with VPN support, PC with Windows XP, Vista or 7.

Introduction:

This document will guide you on how to create a VPN policy for any of the home DSL gateways

that support VPN, as well as how to configure the VPN Pro-Safe VPN client in order to allow a

Virtual Private Network to be established over the internet.

Version 1.1

Checklist:

As we configure the Netgear DSL VPN Gateway, there will be information we’ll add which will

later be used in the configuration of the ProSafe Client Software. This information will be marked

with red numbered circles. The values we will use for this guide are already filled as light grey.

You can print this form to help keep track of this information.

Pre-Shared Key: _ _______________ 12345678 _

Client Identifier: ____ _____ _____client.com _

Router Identifier: __________ _____router.com _

Client’s IP Address: ________ _ _ __192.168.100.1 _

Router’s Network Address: ______ ___192.168.0.0 _

Router’s Network Mask: _ __ _______ 255.255.255.0 _

Router’s WAN IP Address: _ _____________ _86.41.176.179 _

➊

➋

➌

➍

➎

➏

❼

Version 1.1

Configuration of the VPN Policy on the DSL Gateway:

From the Router’s GUI, go to

VPN policies under Advanced –

VPN.

Click on Add Auto Policy.

➊The pre-shared key value

goes here.

This is your Pre-Shared Key.

➋Here we select “Fully

Qualified Domain Name”and

we give the client a name

This is your Client Identifier.

➌Here we select “Fully

Qualified Domain Name”and

we give the router a name

This is your Router Identifier.

➍Here we select “Single

Address”and we specify the

IP.

This is your Client’s IP

Address.

➎- ➏Here we select “Subnet

Address”and add the address

and mask of our router.

This is your Router’s

Network Address and

Router’s Network Mask.

To accept this settings, click

on “Apply”

➋

➌

➊

➏

➎

➍

Version 1.1

Configuration of the VPN Policy on the ProSafe Client:

Before you start configuring the VPN Client, go through the Checklist at the start and make sure

you have all the information listed there.

After installing the VPN Client

Software, click on the plus sign to

open the configuration panel.

Right click on “VPN Configuration”

and add a new Phase 1. It will be

added with the name Gateway.

Version 1.1

Click on gateway.

❼The Remote Gateway field will be

the value of your Router’s WAN

IP Address.

➊Input the Pre-Shared Key that

you have used when creating the

VPN Policy on the Router and

click on the OK Button.

Next, tick the checkbox next to

Use: Secure Gateway Tunnel.

➋The Local ID Type is DNS, and the

Value for the ID is your Client

Identifier.

➌The ID Type field will be the value

of your Router Identifier.

➌

❼

➊

➋

Version 1.1

With this, the configuration is completed. Now we can try our VPN configuration and connect to

our router.

Right click on the Phase 1 and

click on New Phase 2. It will be

added with the name “Tunnel”.

Click on Tunnel.

➍Here we enter the Client’s IP

Address.

➎Here we add the Router’s

Network Address.

➏Here we add the Router’s

Network Mask.

Make sure PFS is enabled with

DH2 (1020) Group.

After you are done, click on

Save.

➍

➎

➏

Version 1.1

Connecting:

To connect the VPN Tunnel we configured, do the following:

Go to Tools and click on Connection

Panel.

Double click on the tunnel we

created.

The tray notice box should tell us we

are connected.

The Connection Panel should show a

green button indicating we are

connected.

Now we should be able to access the resources at the DSL Gateway’s network from our Client

PC.

Other manuals for DGN2200v1

Table of contents

Other NETGEAR Wireless Router manuals

NETGEAR

NETGEAR Essentials PowerLINE WiFi 1000 User manual

NETGEAR

NETGEAR MBR624GU - 3G Mobile Broadband Wireless... User manual

NETGEAR

NETGEAR R6260 User manual

NETGEAR

NETGEAR Orbi RBR750 Installation instructions

NETGEAR

NETGEAR C3000 User manual

NETGEAR

NETGEAR RangeMax WPN824 User manual

NETGEAR

NETGEAR DGN2000 - Wireless Router User guide

NETGEAR

NETGEAR R6800 User manual

NETGEAR

NETGEAR MBR1515 User manual

NETGEAR

NETGEAR WGR614v3 User manual

NETGEAR

NETGEAR D6100 User manual

NETGEAR

NETGEAR R6250 User manual

NETGEAR

NETGEAR WGR614 User manual

NETGEAR

NETGEAR AirCard 785 User manual

NETGEAR

NETGEAR NIGHTHAWK R7000 User manual

NETGEAR

NETGEAR Nighthawk Pro Gaming XR500 User manual

NETGEAR

NETGEAR DGND4000 User manual

NETGEAR

NETGEAR Orbi RBK753S Installation instructions

NETGEAR

NETGEAR WNDR3700v1 - N600 Wireless Dual Band Gigabit... User guide

NETGEAR

NETGEAR D6200B User manual

NETGEAR

NETGEAR AC3200 User manual

NETGEAR

NETGEAR WNR2000 User manual

NETGEAR

NETGEAR DG834G Quick start guide

NETGEAR

NETGEAR DG834N User manual

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

D-Link

D-Link DIR-506L Quick installation guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide

Draytek

Draytek Vigor2120 Series user guide

Sitecom

Sitecom WLR-4000 user manual