NETGEAR ProSafe FVS318N User manual

Installation Guide

ProSafe Wireless N VPN Firewall FVS318N

Follow these instructions to set up your VPN firewall.

•For cable modem service. You must set up the VPN firewall using the same

computer you used when you first set up your internet connection.

•For DSL service. To set up the VPN firewall, you might need information such

as your DSL service login name and password.

Package Contents

The VPN firewall package contains:

•FVS318N VPN Firewall

•Ethernet cable

•Rubber feet

•Power adapter

•Installation guide

•Resource CD

Connect the VPN Firewall

1. Connect the cables between the VPN Firewall, computer, and modem.

a. Turn off your computer.

b. Turn off and unplug the modem.

c. Locate the cable (cable 1 in the diagram) that connects your modem and

computer.

d. Disconnect the cable at the computer end only, point Ain the diagram.

e. Insert the cable from your modem (cable 1 in the diagram) into the WAN

port of the VPN firewall as shown in point B of the second diagram.

f. Insert the cable that came with your VPN firewall (the NETGEAR cable in

the next diagram) into a LAN port on the VPN firewall, such as LAN

port 1 (point C in the diagram). Insert the other end into the LAN port of

your computer (point D in the diagram).

Your cables are connected, and you are ready to restart your network.

2. Restart your network in the correct sequence.

WARNING: Failure to restart your network in the correct sequence could prevent

you from connecting to the Internet.

a. Plug in the power cord to your modem, turn it on, and wait 2 minutes.

b. Plug in the power cord to your VPN firewall, turn it on, and wait 1 minute.

c. Turn on your computer.

Cable 1

ModemComputer

WAN port

NETGEAR cable

VPN firewall

Local portsComputer

Note: For DSL customers, if ISP-provided software logs you in to the Internet, do not

run that software. You might need to go to the browser Tools menu, Internet Options,

Connections tab, and disable auto dialing.

d. To verify that the VPN network is operating correctly check the VPN firewall

LEDs:

•Power.The Power LED should turn solid green. If it does not turn solid

green, check that the power adapter is connected to an AC outlet.

•Test. The Test LED lights when the router is first turned on and then goes

off. If after 2 minutes it is still lit, see the Troubleshooting Tips in this guide.

•WAN. The WAN port LED should be lit. If it is not, make sure that the

Ethernet cable is attached to the VPN firewall WAN port and the modem.

Also, make sure that the modem is powered on.

•LAN. Each LAN port has two LEDs. The green LED on the upper left

indicates network activity. The right LED indicates communication speed.

It is green for 1000 Mbps, amber for 100 Mbps, and off for 10 Mbps. If the

LAN port LED is not on, check that the Ethernet cable from the computer

to the firewall is attached at both ends, and that the computer is on.

Configure the VPN Firewall for Internet

Access

Use your browser to access and configure the FVS318N.

1. From the computer, open a browser such as Internet Explorer. With the VPN

firewall in its factory default state, type http://192.168.1.1 in the browser

address bar and click Enter. The login screen displays.

LAN Ports WAN

Power Test

FVS318N_IG.fm Page 1 Thursday, December 20, 2012 10:51 AM

December 2012

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to

change without notice. Other brand and product names are registered trademarks or trademarks of their

Intended for indoor use only in all EU member states, EFTA states, and Switzerland.

2. Enter admin for the user name and password for the password, both in

lowercase letters, and click Login. The Router Status screen displays.

3. If you need to change settings, select Network Configuration, enter settings

for your network, and click Apply.

4. You can click Broadband Status in the upper right of the screen to display the

Connection Status screen.

5. If you are not connected, click Connect on the Connection Status screen to

connect to the network.

Troubleshooting Tips

Make sure that the network settings of the computer are correct.

•Some cable modem ISPs require you to use the MAC address of the computer

registered on the ISP account. The VPN firewall automatically detects your

computer MAC address. If you are not using the computer registered with your

ISP, see the reference manual to manually enter the correct MAC address.

Technical Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and

use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

You can get the reference manual online at http://downloadcenter.netgear.com or

through a link in the product’s user interface.

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

FVS318N_IG.fm Page 2 Thursday, December 20, 2012 10:51 AM

Other manuals for ProSafe FVS318N

Table of contents

Other NETGEAR Firewall manuals

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router User manual

NETGEAR

NETGEAR STM150 - ProSecure Web And Email Threat Management... User manual

NETGEAR

NETGEAR ProSafe FWAG114 User manual

NETGEAR

NETGEAR FVX538v1 - ProSafe VPN Firewall Dual WAN User manual

NETGEAR

NETGEAR ProSafe FVS318N User manual

NETGEAR

NETGEAR FWG114P - ProSafe 802.11g Wireless Firewall User manual

NETGEAR

NETGEAR UTM5 - ProSecure Unified Threat Management... User manual

NETGEAR

NETGEAR FVS318 - ProSafe VPN Firewall Router User manual

NETGEAR

NETGEAR ProSafe FVX538 User manual

NETGEAR

NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit... User manual

NETGEAR

NETGEAR FVS328 - ProSafe VPN Firewall User manual

NETGEAR

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet... User manual

NETGEAR

NETGEAR ProSAFE SRX5308 User manual

NETGEAR

NETGEAR ProSafe FR114P User manual

NETGEAR

NETGEAR ProSafe FR328S User manual

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Installation and operating instructions

NETGEAR

NETGEAR ProSafe FVS114 User manual

NETGEAR

NETGEAR ProSafe FR328S User manual

NETGEAR

NETGEAR ProSAFE SRX5308 User manual

NETGEAR

NETGEAR ProSAFE SRX5308 User manual

NETGEAR

NETGEAR ProSafe FR114P User manual

NETGEAR

NETGEAR FVS318 - ProSafe VPN Firewall Router User manual

NETGEAR

NETGEAR FVG318v2 - ProSafe 802.11g Wireless VPN Firewall... User manual

NETGEAR

NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Installation and operating instructions

Popular Firewall manuals by other brands

Cisco

Cisco S190 quick start guide

Fortinet

Fortinet FortiGate Voice Series install guide

ADTRAN

ADTRAN NetVanta 2300 Specifications

SecureLogix

SecureLogix ETM System installation guide

Lanner

Lanner FW-8877 user manual

Huawei

Huawei USG6000 Series Upgrade guide

H3C

H3C SecPath F5000-AI-15 installation guide

Nexcom

Nexcom DNA 1150 user manual

Fortinet

Fortinet FortiGate-60 series install guide

Cisco

Cisco 3110 Hardware installation guide

Draytek

Draytek Vigor2860 Series user guide

Lanner electronics

Lanner electronics FW-7650 Series user manual

Swisscom

Swisscom Internet Backup manual

SonicWALL

SonicWALL NSa 5700 quick start guide

DPtech

DPtech FW1000 SERIES Maintenance manual

FEITIAN

FEITIAN MultiPass FIDO product manual

EBLOCKER

EBLOCKER PRO user manual

GTA

GTA GB-200 Product guide