NETGEAR WN3500RP User manual
Universal Dual Band WiFi Extender – Desktop/Wallplug
WN3500RP Installation Guide
Extended Wireless Range
Existing Router Range
5 GHz Wireless
2.4 GHz Wireless
2.4 AND 5 GHz
WIRELESS
EXTENSION
EXISTING
ROUTER
CONNECT WIRED
DEVICES WIRELESSLY
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your
product and use it to register your product at https://my.netgear.com.
You must register your product before you can use NETGEAR telephone
support. NETGEAR recommends registering your product through the
NETGEAR web site.
Phone (US only): 1-888-NETGEAR
Phone (Other Countries):
See http://support.netgear.com/general/contact/default.aspx.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or
trademarks of their respective holders. © NETGEAR, Inc. All rights reserved.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume any
liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
1
Contents
Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Place the Extender and Apply Power . . . . . . . . . . . . . . . . . 7
Connect the Extender to an Existing
WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Extender Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
FastLane™ Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
One-Port WiFi Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
When to Use the Extender Wireless Network . . . . . . . . . . . . . 16
ReadySHARE Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Music Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Wireless SSIDs and Passwords . . . . . . . . . . . . . . . . . . . . . . . 19
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2
Hardware Features
The LEDs on the front show how the extender is working.
Link Rate. Indicates a 2.4 GHz
or 5 GHz wireless connection
between the extender and a
router. The appropriate LED
lights to indicate the type of
connection:
• Green is best.
• Amber is good.
• Red is poor.
• Off. Not connected to router.
WPS
Link Rate
to
Extender
2.4 GHz
Wireless
Device
Link Rate
5 GHz
Power
On/Off
Wireless Device to Extender.
This LED is solid green when
the extender is connected to a
wireless device.
WPS. This LED indicates
a WPS wireless connection.
• Solid green. There is wireless
security (WPA or WPA2).
• Blinking green. A WPS
connection is in progress.
• Off. No wireless security.
The top and side panels have the following features:
On/Off button. Use this button to turn
the extender on and off.
Reset
factory
settings
On/Off
button
WPS
button
Ethernet
port
Audio
port
USB
port
WPS button. Use this button to connect
the extender to your existing WiFi
network. For more information, see
Connect the Extender to an Existing WiFi
Network on page 7.
Ethernet port. Use the Ethernet port on
the extender to connect an Ethernet-
enabled device wirelessly to your
network.
Audio port. Use the Audio port to
connect the extender to your speaker.
USB port. Use the USB port to connect
the extender to a printer.
Reset factory settings. To reset the
extender to its original factory settings,
insert a paper clip into the reset hole and
hold it until the Power LED flashes.
3
4
Insert the AC plug like this:
5
Attach the stand like this:
6
Getting Started
The WiFi Range Extender extends the wireless network to include the
area outside the range of your existing WiFi network. The extender
supports both desktop and wall plug placement. Follow these steps to
set up the extender.
Place the Extender and Apply Power
1. Place the extender an equal distance between your router and the
wireless device located outside the range of your router.
DO DON’T
Tip: If you have to use a different location, move the
extender closer to the device, but still within the
wireless range of the router. Configure the
extender and router in the same room. Once you
have verified the working connection, move the
extender to a location that is midway between
the router and your computer, and still displaying
a green link rate.
2. Plug the extender into an electrical outlet, and wait 1 minute until
the extender starts. The Power LED turns green.
7
Connect the Extender to an Existing
WiFi Network
To extend the range of your WiFi network, you must connect the
extender to your existing WiFi network. You have two options to
connect the extender to your network.
Option 1: Connecting with WPS (Wi-Fi Protected Setup)
WPS lets you easily join a secure WiFi network without typing the
network name and password. The WPS button is a physical
button on the WiFi router, gateway, or access point.
If your router supports WPS (Wi-Fi Protected Setup), NETGEAR
recommends that you use Option 1; otherwise, go to Option 2.
Tip: WPS does not support WEP network security.
If you are using WEP security, use Option 2
to connect.
Option 2: Connecting without WPS, using the web browser
setup guide
The web browser setup guide walks you through the necessary
steps to connect your extender to an existing WiFi network.
8
Connecting with WPS (Option 1)
1. Press the WPS button on back panel of the extender. The WPS
LED on the front blinks.
2. Within 2 minutes, press the WPS button on your wireless router,
gateway, or access point.
If successful, the WPS LED on your extender turns solid green,
the 2.4 GHz Link Rate LED lights up, and the extender is
connected to your existing WiFi network.
Note: If the 2.4 GHz Link Rate LED does not
turn green, repeat steps 1 and 2, or
make sure your router supports WPS.
3. If your router supports the 5 GHz band, repeat steps 1 and 2 to
connect the extender to the 5 GHz band. The 5 GHz Link Rate LED
on your extender lights up.
The extender’s wireless network name (SSID) changes to your
existing WiFi network name, with _2GEXT or _5GEXT at the end
of the name, depending on whether the extender is connecting to
your WiFi network in 2.4 GHz or 5 GHz.
Existing WiFi network name: MyNetworkName
New Extender network name: MyNetworkName_2GEXT
To connect additional WiFi devices to your extender network, use
the same network security key (password) as the one that is set
on your existing wireless network/wireless router.
Other manuals for WN3500RP
2
Table of contents
Other NETGEAR Extender manuals
NETGEAR
NETGEAR XAVB2602 User manual
NETGEAR
NETGEAR EX6400v3 User manual
NETGEAR
NETGEAR WN3000RPv3 User manual
NETGEAR
NETGEAR EX2700 User manual
NETGEAR
NETGEAR Powerline 1000 User manual
NETGEAR
NETGEAR EX6250v2 User manual
NETGEAR
NETGEAR WN3000RP User manual
NETGEAR
NETGEAR AX1750 EAX18 User manual
NETGEAR
NETGEAR AX1600 User manual
NETGEAR
NETGEAR WN2000RPTv2 User manual
NETGEAR
NETGEAR RangeMax WPN824EXT User manual
NETGEAR
NETGEAR EX6200 User manual
NETGEAR
NETGEAR XAUB2511 User manual
NETGEAR
NETGEAR Nighthawk X6 User manual
NETGEAR
NETGEAR WN2000RPTv1 Guide
NETGEAR
NETGEAR AX1800 EAX14 User manual
NETGEAR
NETGEAR RangeMax WPN824EXT User manual
NETGEAR
NETGEAR EX7000 User manual
NETGEAR
NETGEAR XAVNB2001 User manual
NETGEAR
NETGEAR WN2000RPTv1 User manual
