NetComm AV SERIES User manual
NETCOMM AV™ SERIES
Wireless Home AV
Connection Kit
1
Setting up the Access Point
Take the Wireless Access Point out of the box and connect it to your broadband
modem/router with one of the supplied Ethernet cables.
Take one of the supplied power adapters and connect it from the wall into your
Wireless Access Point and power it on.
Desktop
Power
Adapter
Power
Point
Modem/Router
Internet
Take the Wireless Client Bridge out of the box and connect it to the device/s that
you want to connect to the Internet with one of the supplied Ethernet cables.
Note: If you wish to connect more than one device, you will need to use an Ethernet cable that has been supplied with that product
Take the other supplied power adapter and connect it from the wall into your
Wireless Client Bridge and power it on.
IP TV
Blu-Ray
Gaming Console
Laptop
2
Setting up the Client Bridge
3
Congratulations
You are now connected and able to use your Wireless Home AV Connection Kit
to transport your Internet connection to your chosen devices.
4
Troubleshooting
Your Wireless Access Point and Wireless Client Bridge will not connect to
each other
At any time you can reset the wireless conguration on each device to re-pair the
devices to each other. Simply press and hold the Reset button for approximately
three seconds on the Wireless Access Point. Within one minute press and hold
the Reset button for approximately three seconds on the Wireless Client Bridge.
The two devices will rediscover each other with a new, randomly assigned
wireless password.
When the LED is lit blue, you can tell that the devices are paired with each other.
?
NB6
NB6W
NB6Plus4Wn
NB6Plus4
NB6Plus4W
5
NetComm Gateway Series
ADSL2+ Modem Routers for your product
The NB6 Series is ideal for home, small ofce/home ofce (SoHo) and small
business users needing a quality router for a variety of applications.
NB6 1 Ethernet port, 1 USB port
NB6W 1 Ethernet port, 1 USB port, 54Mbps Wireless G
NB6Plus4 4 Ethernet ports
NB6Plus4W 4 Ethernet ports, 1 USB port, 54Mbps Wireless G
NB6Plus4Wn 4 Ethernet ports, 300Mbps Wireless N
* Maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n Draft 2.0 specications. Actual
wireless speed and coverage are dependent on network and environmental conditions included but not limited to volume of network trafc,
building materials and construction/layout.
Table of contents
Other NetComm Wireless Access Point manuals
NetComm
NetComm NP6800 User manual
NetComm
NetComm NP720 User manual
NetComm
NetComm NP726 Operational manual
NetComm
NetComm INFRASTRUCTURE SERIES User manual
NetComm
NetComm NP720 User manual
NetComm
NetComm CloudMesh NS-01 Quick start guide
NetComm
NetComm NS-02 User manual
NetComm
NetComm NP731 User manual
NetComm
NetComm NP725 User manual
NetComm
NetComm NP720 User manual
