Nerival NEO-80 User manual
2 www.nerival.fi
Table of contents
Safety instructions .....................................................................................................3
Overview....................................................................................................................4
Technical information ................................................................................................5
Installation example...................................................................................................6
Installation of mounting plate and door operator...................................................6
Outward opening door: Installation with push arm (door operator inside) ............7
Inward opening door: Installation with pull arm (door operator inside).................8
Connection.................................................................................................................9
Button functions ......................................................................................................11
Settings ....................................................................................................................12
General settings 1-22............................................................................................12
Advanced settings................................................................................................. 13
Remote control functions.........................................................................................14
Adding a remote control.......................................................................................14
Deleting remote controls......................................................................................14
Digital display code table .........................................................................................15
3 www.nerival.fi
Safety instructions
This manual is intended for use by electrical professionals. All installation
connections and adjustments must be made in accordance with this instruction
manual.
•Before installation
Check for transport damages, do not install / use a damaged unit.
Make sure that the strength and stability of the wall and door structures are
sufficient.
•Connection
Only professional electricians are allowed to make electrical connections.
Make sure the power supply is turned off before making any connections.
This product must be earthed.
•Before turning on the power
Ensure correct supply voltage 230VAC.
Make sure that the input and output connections are connected correctly,
and the connectors are tight. Improper connection can damage the door
operator.
•Always switch off the power before installation or maintenance
and make sure that power is disconnected.
Read the manual carefully before installing the product.
Improper installation can be fatal.
The manufacturer or distributor is not responsible for the
consequences of incorrect installation or use.
5 www.nerival.fi
Technical information
Model
NEO-80
Door max. weight
100kg, recommended 80kg
Door max. width
1200mm, recommended 1000mm
Weight
6,5kg
Service life
More than 1.000.000 operations
Installation method
Surface mounting
Voltage output for locking
12VDC
With included relay card
12V AC/DC - 30V AC/DC
Door hold-open time
0-30s, adjustable
Opening angle
0°-99°, adjustable
Supply voltage
230VAC
Max. power
45W
Standby power consumption
< 2W
Remote control distance
Over 30m
Operating temperature
-20℃- 55℃
Protection class
IP12D
Dimensions
515mm x 95mm x 90mm
Approvals
EU Directive
Test Standard(s)
2011/65/EU
(RoHs)
EN 62321-1:2013
EN 62321-2:2014
EN 62321-3-1:2014
EN 62321-4:2014+A1:2017
EN 62321-5:2014
EN 62321-6:2015
EN 62321-7-1:2015
EN 62321-7-2:2017
EN 62321-8:2017
EU Directive
Test Standard(s)
2014/30/EU
(EMC)
EN IEC 61000-6-1:2019
EN 61000-6-3:2007/A1:2011
/AC:2012
9 www.nerival.fi
Connection
electric lock
Electric lock output +12VDC, max 600mA*
electric lock
Electric lock output -12VDC*
Emergency power supply
Backup power supply input +12VDC
COM
Backup power supply input -12VDC
Double door interlock
Interlock signal
COM
COM
Double door synchronization
Synchronization of two door operators
COM
COM
Sensor power supply
Sensor output -12VDC
Sensor power supply
Sensor output +12VDC
Sensor signal
Sensor signal input
Sensor signal
Sensor signal input
12V
Voltage output +12VDC, max 200mA
0V
Voltage output -0VDC
COM
COM
OpeningDoor anti-collision
Opening door safety sensor input
ClosingDoor anti-collision
Closing door safety sensor input
Access control signal
Access control signal input
10 www.nerival.fi
Sensor signal/Sensor signal: Signal opens the door from sensor. When the input is
active, the display shows F1.
OpeningDoor anti-collision/COM: Opening door safety sensor. When the sensor
detects, the door stops. When the input is active, the display shows F2.
ClosingDoor anti-collision/COM: Closing door safety sensor. When the sensor
detects, the door opens. When the input is active, the display shows F3.
Access control signal/COM: Signal opens the door from access control. The input is
either a voltage signal of 12VDC or a short circuit signal. When the input is active,
the display shows F4.
Double door interlock/COM: When the input is active, the display shows F5. Ask
your supplier for more information.
Double door synchronization/COM: Synchronization of two door operators. Both
door operators operate simultaneously. When the input is active, the display shows
F6.
* Use the supplied relay card if voltage used for locking is other than 12VDC.
Table of contents
Other Nerival Door Opening System manuals
Popular Door Opening System manuals by other brands
Normstahl
Normstahl IDO7 installation manual
Häfele
Häfele Finetta T 70 VF manual
AGS
AGS D-PL Instructions for fitting, operating and maintenance
Stanley
Stanley MA900ñ Installation and owner's manual
WITTUR
WITTUR Hydra Plus UD300 Instruction handbook
Alutech
Alutech TR-3019-230E-ICU Assembly and operation manual