Neptune NPVS150 –Basic Operation Guide Page 4
5. ADJUSTING DEFAULT SPEEDS
5.01 Short press until screen displays S1:, S2:, S3: or P: (You cannot enter controller settings
whilst CL: Clock is displayed)
5.02 Press and hold down for 3 seconds, this will now enter controller settings.
5.03 Select which speed setting you wish to adjust by pressing or or .
5.04 Short press , press to scroll right and to scroll left between digits.
5.05 Short press or to increase or decrease the speed setting by 10 RPM. Long Press to increase /
decrease rapidly. (This will not alter the saved settings)
5.06 Short press to save setting.
5.07 Press and hold down for 3 seconds, this will now exit the controller settings.
6. PROGRAMMING TIMER SCHEDULES
The NPVS150 has programmable timer schedules for speed settings 1 and 2. These schedules can be used as a
timer or to schedule speed run times coinciding with external time clock run times.
6.01 Short press until screen displays S1:, S2:, S3: or P: (You cannot enter controller settings
whilst CL: Clock is displayed)
6.02 Press and hold down for 3 seconds, this will now enter the controller settings.
6.03 Press to scroll through menu until 1 o: is displayed to set start time for Speed 1 or 2 o:
displayed to set start time for Speed 2.
6.04 Short press until digits flash.
6.05 Press to scroll right and to scroll left between digits.
6.06 Press or to change time.
6.07 Short press to save setting.
6.08 Press to scroll through menu until is 1 F: is displayed on screen to set finish time for Speed 1
or 2 F: displayed to set finish time for Speed 2.
