MESSAGE LENGTH TABLES
Message length is determined by the bit-rate of the audio file. Refer to the table
below to determine the maximum memory of each unit.
Model
Number Maximum
Memory
S1XX64NSTD 16MB (16,777,216 bytes)
S1X128NSTD 32MB (33,554,432 bytes)
S1X256NSTD 64MB (67,108,864 bytes)
S1X512NSTD 128MB (134,217,728 bytes)
S11024NSTD 256MB (268,435,476 bytes)
S12040NSTD 512MB (536,870,912 bytes)
S13064NSTD 768MB (805,306,368 bytes)
The Sonorous may store up to 500 messages, assuming the total size of all
messages does not exceed the maximum memory of the unit stated above. As a
general rule of thumb, allow extra memory to be used by the unit’s file system. Any
messages that exceed the estimated memory (Base 16MB x 1,000,000 = 16,000,000
bytes) might not be downloaded into the unit.
The actual size of the message(s) can be found by viewing the Properties information
of the selected file(s). View the Size on disk label. (The larger of the two)
In the example above, the size of the file is 3,842,048 bytes. If you divide that by
1,048,576, the result, 3.66MB, will be the size of the file in MB. On a base 16MB
Sonorous, you still have 12.34MB of available memory.
Sonorous Model 1 9 4/8/2004
