Neilsen CT4040 User manual
vol 1. Sep. 2013
USER
MANUAL
PRESET ADJUSTABLE
DIGITAL
TORQUE WRENCH
CT4040
01
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic
safety and health requirements of the EC Directive based on its design
and type, as brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration
will lose its validity.
Product description: PRESET ADJUSTABLE DIGITAL TORQUE WRENCH
Model: CT4040
Applicable EC Directives:
EC Directive of Electromagnetic Compatibility 2014/30/EU
Harmonized standards
EN 61000-6-3, EN 61000-3-3,
EN 61000-3-2, EN 61000-6-1
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2017-10-24
Digital Torque Wrench
Thank you for choosing digital torque wrench. Please read instruction carefully before
using. You will find this Digital Torque Wrench easy to use. Turn it on and apply the
Digital Torque Wrench.
CONTENTS
1.Product Specifications
2.Components and Features
3.How to use Preset Digital Torque Wrench.
4. Care and Cleaning
5. Importment safeguards
3-1: Batteries Installation and Replacement
3-2: Power on
3-3: How to on select “UNIT”. (kg-cm, Ib-in, Ib-ft, N-m)
3-4: How to use Pre-set function.
3-5: How toset “Target Torque Value”
3-6: How toset “Peak” and ”Track”
3-7: L.C.D Back Light
3-8: Turn Off
3-9: Memory
02
03
Product Specifications
Model No. : CT4040
Accuracy
Pre-set
Display resolution
Memory
Display Range
Drive
Operation Mode
Unit
Length
Weight
Gear Teeth
Key
Battery
Battery Life
Operating Ambient Temperature
Storage Temperature
Operating relative humidity
Auto shut off
± 2%
10 sets
0.01
1
6~ 30 N-m (4.4 ~ 22.1lb-ft)
1/4”
Peak/Trace
kg-cm, lb-in, lb-ft, Nm
240mm
0.4 kg
72
5
AAA x 3pcs
80hrs (continuous operation)
-10ºC - 60ºC (13.9ºF - 139.9ºF)
-20ºC - 70ºC (-4ºF - 157.9ºF)
15 to 90% noncondensing
150 seconds (if do not use wrench.)
Components and Features
04
Drive
LED
- (Lower)
Peak Trace
(Clear)
Battery Cap
Memory
+ (Increase)
LCD
Buzzer
Back Light
How to use Digital Torque Wrench
1.
2.
3.
4.
5.
AAA x 3 pcs
Keep the end thread clean and dry for a good contact.
Open the battery cap.
Remove the old batteries.
Install 3 pcs AAA Batteries in the handle (with the “+” sign facing upwards).
1.
2.
3.
4.
When batteries are low a “ ” icon will light.
Remove the batteries if stored for a long period of time.
Battery life depends of battery quality and the amount of the lights and buzzer are used.
Typical life is up to 110 hours.
1. Press and release the “ ” button toturn the wrench on. The LCD panel shows ““.
2.
3.
4.
After 2 seconds the L.C.D panel show “00.0”.
Swing the Wrench.
The L.C.D displays the torque value measured.
3-1Battery Install and Replacement.
3-2Power On.
Note
If you do not use the wrench for 80 seconds the wrench will automatically shut off.
Note
05
6. Screw the battery cap.
OPENCLOSE
Battery Cap
How to use Digital Torque Wrench
3-3How to select “Unit”.
3-4How to use Pre-set function.
1.
2.
3.
When you change units the target setting will also be changed tothe new units value.
This electronic torque wrench contains 4 unit selections.
(kg-cm, in-lb, ft-lb, N-m).
Note
1.
2.
3.
When you change units the target setting will also be changed tothe new units value.
This electronic torque wrench contains 4 unit selections.
(kg-cm, in-lb, ft-lb, N-m).
Note
06
Press “M” and “P/T” button together and release toselect different torque units.
To: Increase (+): 1. Press and hold the (+) button to increase the current target value.
2. LCD will show the reading.
3. Press and released "M" button please.
4.The first pre-set value is stored.
1. Press "M" button, the L.C.D panel shows "P01" than "0.0" or another reading.
2. If need toPre-set another reading, follow the first point please.
3. There 10 sets of reading can stored.
To: Lower (-): 1. Press and hold the (-) button to lower the current target value.
2. The target will show for 10 seconds.
3. After 10 seconds the LCD display 0.00.
4.The first pre-set value is stored.
How to use Digital Torque Wrench
3-5How to set “Peak” or“Trace”.
1.
2.
3.
Press and release “P/T” button whe the wrench is on.
The L.C.D panel shows “”.
The L.C.D panel shows 00.0 after 2 seconds.
07
Peak:
1.
2.
3.
Press and release “P/T” button whe the wrench is on.
The L.C.D panel shows “”.
The L.C.D panel shows 00.0 after 2 seconds.
Trace:
3-6L.C.D backlight.
3-7Turn Off.
1. If you do not use the wrench for 150 seconds the wrench will automatically shut off.
2. To manually turn off the wrench press and release the “ ” button.
On: Press and release the “ ” button.
Off: Press and release the “ ” button one more time.
How to use Digital Torque Wrench
3-8Memory
1. This Digital Torque Wrench stores the last 1torque readings only.
1.
2.
3.
4.
To display this stored readings. The digital trorque wrench must be turned on.
Press and release “P/T” button” please.
Let the wrench under the peak “” mode.
This Digital Torque Wrench stores the latest torque value reading.
Note
08
Table of contents
Other Neilsen Power Tools manuals
Neilsen
Neilsen CT2914 User manual
Neilsen
Neilsen CT3876 User manual
Neilsen
Neilsen CT1405 User manual
Neilsen
Neilsen CT3950 User manual
Neilsen
Neilsen CT0675 User manual
Neilsen
Neilsen CT1091 User manual
Neilsen
Neilsen CT2594 Assembly instructions
Neilsen
Neilsen CT0674 User manual
Neilsen
Neilsen CT1703 User manual
Neilsen
Neilsen CT1109 User manual
Neilsen
Neilsen CT0878 User manual
Neilsen
Neilsen CT3994 User manual
Neilsen
Neilsen CT4869 User manual
Neilsen
Neilsen CT0870 User manual
Neilsen
Neilsen CT4789 User manual
Neilsen
Neilsen CT2283 User manual
Neilsen
Neilsen CT3990 User manual
Neilsen
Neilsen CT0904 Operation instructions
Neilsen
Neilsen CT4542 User manual
Neilsen
Neilsen CT0957 User manual
