Nedap MidRanger + Antenna Set User manual

User Manual

Set MidRanger + Antenna (9217967)

The MidRanger + Antenna set is the ideal RFID item scanner for your library staff. The shielded

antenna is developed to only read items that are put on top of the antenna, resulting that no

mistakes will be made in reading the wrong items. The design of the product is perfected and aimed

to fit in any environment.

Version: 2.8

published on Monday, January 02, 2017

2 www.nedaplibrary.com

Technical support

Email address

[email protected]om

Visitors address

Nedap Library Solutions

Parallelweg 2d

Groenlo

The Netherlands

Postal address

Nedap Library Solutions

P.O. box 102

7140 AC Groenlo

The Netherlands

Telephone Number

Tel: +31(0)85 88 88 850

The software / hardware described in this document / file is furnished under a license agreement and may be used

only in accordance with the terms of agreement.

Documentation copyright notice

Any technical documentation that is made available by Nedap Library Solutions is the copyrighted work of Nedap

Library Solutions and is owned by Nedap Library Solutions.

Disclaimer

NO WARRANTY. The technical documentation is being delivered to you and Nedap Library Solutions makes no

warranty as to its accuracy or use. Any use of the technical documentation or the information contained herein is

at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors. Nedap

Library Solutions has the right to make changes without prior notice. No part of this publication may be copied

without the express written permission of Nedap Library Solutions, Parallelweg 2d, 7141 DC Groenlo, The

Netherlands.

Trademarks

Nedap, and the Nedap logo are registered trademarks of Nedap N.V. Groenlo. Other product names mentioned in

this manual may be trademarks or registered trademarks of their respective companies and are hereby

acknowledged. Printed in the Netherlands.

Table of Contents

Technical support ..................................................................................................................................................................................2

Table of Contents...................................................................................................................................................................................3

Safety Precaution...................................................................................................................................................................................4

IC FCC / IC STATEMENT........................................................................................................................................................................5

Compliance statements (part15.19) .......................................................................................................................................5

Warning (part15.21) ........................................................................................................................................................................5

Information to the User (Part 15.106(b)) ..............................................................................................................................5

Dimensions ...............................................................................................................................................................................................6

Content of Box.........................................................................................................................................................................................7

Installation Guide ..................................................................................................................................................................................8

Antenna ..................................................................................................................................................................................................8

Reader..................................................................................................................................................................................................10

First setup ..........................................................................................................................................................................................11

IP Networking...................................................................................................................................................................................12

RFID modes .......................................................................................................................................................................................13

EAS.........................................................................................................................................................................................................14

ISO 15693 / I-Code.......................................................................................................................................................................15

Monitor ................................................................................................................................................................................................16

Operation of product ........................................................................................................................................................................17

Setup.....................................................................................................................................................................................................17

Switching on/off.............................................................................................................................................................................17

Use of antenna ................................................................................................................................................................................17

Maintenance..........................................................................................................................................................................................18

Software..............................................................................................................................................................................................18

Cleaning instruction .....................................................................................................................................................................18

Frequently Asked Questions.........................................................................................................................................................19

Discarding...............................................................................................................................................................................................20

Technical Specifications..................................................................................................................................................................21

EU Declaration of Conformity ......................................................................................................................................................23

4 www.nedaplibrary.com

Safety Precaution

Installation of these products must be performed by a qualified installation partner.

Do not use the product in damp places.

If you smell smoke or other odors or hear a strange sound, unplug the power cord and

contact your dealer.

Protect the power cord, USB cable, Ethernet cable and antenna cable from physical or

mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall outlets, and the point where the cable

connects to the product.

Do not disassemble, repair or modify the product at your own discretion.

To reduce the risk of electrical shock or damage, do not expose this device to rain or

moisture.

Refer all servicing to qualified service personnel. Servicing is required when the system

has been damaged in any way, such as power supply cord or plug is damaged, liquid has

been spilled, or the device has been dropped.

WARNING: Do not place near electromagnetic fields.

IC FCC / IC STATEMENT

FCC ID: CGDMIDRANGER

IC: 1444A-MIDRANGER

Compliance statements (part15.19)

This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Cet appareil se conforme aux normes CNR210 exemptés de licence du Industriel Canada. L'opération

est soumise aux deux conditions suivantes:

(1) cet appareil ne doit causer aucune interférence, et

(2) cet appareil doit accepter n'importe quelle interférence, y inclus interférence qui peut causer une

opération non pas voulu de cet appareil.

Warning (part15.21)

Changes or modifications not expressly approved by party responsible for compliance could void the

user’s authority to operate the equipment.

Information to the User (Part 15.106(b))

Note: This equipment has been tested and found to comply with the limits for a class B digital

devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequent energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does not

cause harmful interference to radio or television reception, which can be determine by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

This radio transmitter 1444A-MIDRANGER has been approved by Industry Canada to operate with the

antenna type Model 9564918 (see page 7 of this Manual) with the maximum permissible gain

indicated. Antenna types other than 9564918 having a gain greater than the maximum gain indicated

for that type, are strictly prohibited for use with this device.

6 www.nedaplibrary.com

Dimensions

Content of Box

When you receive the box, it is strongly advised to check the contents of the box before installation.

The box should contain the following components:

Antenna 9564918

Reader 9564675

Net adapter 9651802

Documentation

oThis manual

oRF.Test Lite manual

The antenna has a 2 meter RG174 cable with a SMA connector.

The reader has a power connector, an USB port, an Ethernet port, and a SMA connector for the

antenna.

8 www.nedaplibrary.com

Installation Guide

Antenna

Because the antenna is shielded, it can be used in a lot of different environments. It can be placed on

any desk type, but when it is mounted below a table, the table should be made of a material that

doesn’t influence 13.56MHz RFID fields. So wooden tables or plastic tables will work, but metal

tables will disrupt the antenna and make it not work.

The field in which the antenna will read a tag can be found in the image below. Make sure that when

a book is placed on the reader, the actual tag is within the area shown below.

Note: The antenna might disrupt the functionality of mice, keyboard or other

input devices when these devices are put in the antenna field.

On table

Make sure that there will not be any metals present in the antenna field when using it on top of a

table. Also make sure that the cable of the antenna is not kinked or stressed in any way possible.

Below table

When looking for a good spot to mount the antenna, make sure the table doesn’t have any metals

near the antenna (field). When a good spot is found, you will need 4 fastening screws (corresponding

to your table material), and a drill to prepare the table.

Tape the template (which you can cut out from the next page) on the surface where you want to

place the antenna. Make sure to take into account the minimum distances from the sides of the

template. These go both ways.

Open up the MidRange Antenna, by carefully removing the screws on the bottom of the product. Put

the hood in the desired position, and drill four holes through the hood into the table while holding

the hood in place. Make sure to use a smaller drill than the diameter of the screw, so that the screw

will tap itself further into the table.

TIP: Use DuctTape, or a clamp to keep the hood in place, whilst drilling the

holes and mounting the hood with the screws. (Remove when remounting the

bottom)

Re-attach the bottom of the antenna to the mounted hood. Be careful not to destroy the thread in the

mounting points of the hood when doing so.

10 www.nedaplibrary.com

Reader

The reader itself can also be placed on top of a table, or can be mounted under a table, or against a

wall. The reader is mounted using three screws. Always make sure that none of the cables is under

any stress when mounting the reader.

On table

Get the rubber feet from the packaging, and place these under the reader casing to make sure it will

not scratch the surface that it will be placed upon.

Below table or on wall

The reader can also be mounted under a table, or against a wall. This can be done using 3 screws,

supplied with the reader.

Predrill the three holes in the surface. The pattern for these holes can be found in the drawing

T5760925-40.01.

Place the top two screws, and screw them in so that the head of the screw is only 1 or 2 mm out of

the surface. Remove the hood of the MidRanger by levering a screwdriver carefully in the opening at

the front of the reader. Slide the MidRanger onto the two screws, and place the third and final screw.

Snap the hood back onto the reader.

This manual suits for next models

Table of contents

Other Nedap RFID System manuals

Nedap

Nedap TRANSIT User manual

Nedap

Nedap TRANSIT Entry User manual

Nedap

Nedap uPASS TARGET User manual

Nedap

Nedap Transit Ultimate User manual

Nedap

Nedap VP1007-B User manual

Nedap

Nedap uPASS Access User manual

Nedap

Nedap ANPR LUMO User manual

Nedap

Nedap TRANSIT Entry User manual

Nedap

Nedap uPASS REACH User manual

Nedap

Nedap LibAssist User manual

Nedap

Nedap NVITE User manual

Nedap

Nedap PROX-BOOSTER 2G User manual

Popular RFID System manuals by other brands

Chainway

Chainway R1 user manual

IFM

IFM DTC600 installation instructions

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M user manual

RHOMBUS

RHOMBUS DR20 user manual

Sirit

Sirit IDentity 6204 user guide

SOREX

SOREX FLEX instruction manual

Omron

Omron V780-HMD68-EIP-KR user manual

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Hardware user manual

Shuttle

Shuttle BR06 Audio & Video Settings

Digilock

Digilock Curve Keypad Basic install guide

Atid

Atid AT870 user guide

Chacon

Chacon 34958 user guide

Paxton

Paxton PROXIMITY architectural reader instructions

CipherLab

CipherLab 1800 series quick start guide

Brady

Brady FR22 user guide

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF manual

Unitech

Unitech RH767 user manual

Honeywell

Honeywell 026366.00 Mounting and operation instructions