NEC NP610S Series Installation guide
FAQ: Cleaning Smartboard Filters
12/10/2012
Rev 1
PURPOSE: The purpose of this pro edure is to demonstrate lean and reset the filters for Smartboard
proje tor NEC NP610S.
OPERATING SYSTEM: Windows 7 is demonstrated in this pro edure, but similar steps an be taken with
Windows XP and Vista.
PROCESS
STEP
REFERENCE IMAGE
STEP 1:
Lo ate
filter
lo ation on
the rear of
the
proje tor.
Remove f
ilter by
pressing the tab
lo ated on the top of
the filter frame.
STEP 2:
Lo ate
filter
lo ation on
the side of
the
proje tor.
Remove f
ilter by
pressing the tab
lo ated on the top of
the filter frame.
FAQ: Cleaning Smartboard Filters
12/10/2012
Rev 1
STEP 3:
Remove
filters from
frames and
lean with
water. Do
NOT USE
soap. Soap
an
damage
the filters
FAQ: Cleaning Smartboard Filters
12/10/2012
Rev 1
Step 4:
Dry
Filters
Pat dry with
paper towels
Let filters
ompletely
dry.
LET DRY OVERNIGHT!
Reinstall fi
lters
S
tep 5:
Reset
Clean Filter
H urs
Warning
•
Push
“MENU”
FAQ: Cleaning Smartboard Filters
12/10/2012
Rev 1
•
Right arrow
until reset
menu
shows
•
Press the
down arrow
to Clear
Filter Hours
• Press
ENTER to
sele t
• Left arrow
to YES
• Press
ENTER,
then EXIT
button
twi e
Other manuals for NP610S Series
1
Other NEC Projector manuals
NEC
NEC LT75Z - MultiSync SVGA DLP Projector Assembly instructions
NEC
NEC PE506UL User manual
NEC
NEC GT5000 - XGA LCD Projector Use and maintenance manual
NEC
NEC VT45 Installation and user guide
NEC
NEC NP-PA600 Series User manual
NEC
NEC LCDMT800 User manual
NEC
NEC NP-PX700W User manual
NEC
NEC VT59EDU User manual
NEC
NEC HT410 Series User manual
NEC
NEC PA1004UL Series User manual
