NEC V554Q User manual
NEC Display Solutions of America, Inc.
V554Q Installation Guide [Ver.1.0]
www.necdisplay.com V554Q Page 1 of 11
Contents:
Product Description and Notes Page 1
Tilt Angle and Rotation Page 1
Ventilation Recommendations Page 2
Display Dimensions Page 3-4
Display Dimensions with stand Page 5
Optional Table Top Stand Dimensions Page 6
Dimensions of Optional Wall Mount (WMK-3255S) Page 7
Compute Module Integration Page 8
Input Panels Page 9
Control Codes Page 10
Browser Control Page 11
Product Description
V554Q
Display Resolution 3840 x 2160 at 60Hz
Power Consumption (Typical) 120W
Power Consumption (Max Brightness) 170W
Power Consumption (Overall Max)* 300W
BTU's (Typical) 409.49 BTU/hr
BTU’s (Max Brightness) 580.11 BTU/hr
BTU’s (Overall Max)* 1023.72 BTU/hr
Net Dimensions 48.8 x 28.1 x 2.7 in. / 1238.4 x 712.8 x 68.9mm
Net Weight 59.1lbs. / 26.8kg
*Overall Max refers to when the unit is at max brightness and the following features are also active: OPS Slot, External Speaker, Raspberry Pi
Compute Module Slot
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Tilt Angle and Rotation
Monitor may be angled and rotated from normal landscape and portrait orientation to both face up and face down positioning. Rotate
only clockwise for portrait orientation.
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 2 of 11
Ventilation Recommendations:
Dimensions below are recommended for proper ventilation when the unit is in a recessed area.
NOTE:
The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other
means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 3 of 11
Display dimensions:
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 4 of 11
Display dimensions (cont.):
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 5 of 11
Display Dimensions (with ST-401 stand):
NOTE:
The ST-401 optional stand attaches to the VESA hole pattern on the back of the display and can be set so the display is either ~30mm or ~50mm from
the tabletop
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 6 of 11
Optional Table Top Stand Dimensions (ST-401):
NOTE:
The pole of the ST-401 stand connects directly to the VESA hole pattern on the back of the display.
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 7 of 11
Dimensions of Optional Wall Mount Kit (WMK-3255S):
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 8 of 11
Compute Module Integration:
Door on the back of the display can be opened by loosening captive screws.
Separate IO Board is necessary to accompany RPi Compute Module in unit
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 9 of 11
InputPanel:
Bottom
Side (Rotated)
ASCIICommonCommands:
This monitor supports common ASCII control commands with many other NEC projectors. For more information on this, please see our
website.
NEC Display Solutions of America, Inc.
www.necdisplay.com V554Q Page 10 of 11
Control Codes:
NOTE: Contact your NEC representative for codes not listed.
CableConnection
Communication Protocol:
Interface: RS-232C
Communication System: Asynchronous
Baud Rate: 9600 bps
Data Length: 8 bits
Parity: None
Stop Bit 1 bit
Communication Code: ASCII
Interface: Ethernet (CSMA/CD
Communication System: TCP/IP (Internet Protocol Suite)
Communication Layer: Transport layer (TCP)
IP Address: 192.168.0.10 (default out of box)
Port Number: 7142 (Fixed)
Transmit Data+
Transmit Data-
Receive Data+
Receive Data-
Not Used
Not Used
Not Used
Not Used
Table of contents
Other NEC Monitor manuals
NEC
NEC MultiSync LCD1760NX Guide
NEC
NEC LCD5220-AV - MultiSync - 52" LCD Flat Panel... User manual
NEC
NEC X461HB - MultiSync - 46" LCD Flat Panel... Guide
NEC
NEC MultiSync LCD1512 User manual
NEC
NEC MultiSync 70GX2 Pro User manual
NEC
NEC P60XP10-BK User manual
NEC
NEC MultiSync ME431 User guide
NEC
NEC NEC MultiSync FE771SB FE771SB FE771SB User manual
NEC
NEC AccuSync LCD72VX Quick reference guide
NEC
NEC MultiSync X462HB User manual
NEC
NEC MultiSync E244FL User guide
NEC
NEC LCD4020-BK-AV - 40IN LCD 1200:1 1366X768 60HZ Dvi-d... User guide
NEC
NEC MULTEOS Series User manual
NEC
NEC MD304MC - MultiSync - 29.8" LCD Monitor User manual
NEC
NEC MultiSync LCD1735NXM User manual
NEC
NEC MultiSync XP29, XM29 Xtra User manual
NEC
NEC MultiSync LCD1970NX User manual
NEC
NEC V462-AVT Guide
NEC
NEC LCD4615 - MultiSync - 46" LCD Flat Panel... User manual
NEC
NEC M40 - MULTEOS - 40" LCD TV User manual
