NEC MultiSync XV17+ User manual
MultiSync XV17+
User’s Manual
Declaration of the Importer
We hereby certify that the color monitors
MultiSync XV17+ JC-1745UMB
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 60555-2
- EN 60555-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
NEC Europe Ltd. Ismaning Office
Steinheilstraße 4-6
D-85737 Ismaning, Germany
Safety Instruction
Caution:
When operating the JC-1745UMB with a 220-240V AC power source
in Europe except UK, use the power cord provided with the monitor.
In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.
When operating the JC-1745UMR with a 220-240V AC Power source
in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.
IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of
International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
NEC is a registered trademark of NEC Corporation. ErgoDesign, IPM, OSM, ColorControl,
OptiClear, CROMACLEAR and Advanced Digital Control System are trademarks of NEC Home
Electronics, Ltd.
MultiSync is a registered trademark of NEC Technologies, Inc in U.S., and of NEC Home
Electronics, Ltd in Canada, U.K., Germany, France, Spain, Italy, Austria, Benelux,
Switzerland, Denmark, Finland, Norway and Saudi Arabia.
All other trademarks or registered trademarks are property of their respective owners.
English
Introduction
Congratulations on your purchase of the MultiSync XV17+ colour
Monitor!
The MultiSync XV17+ monitor includes Microsoft’s Plug and Play,
NEC’s ErgoDesign properties, the On Screen Manager (OSM), as well
as all the unique features you expect from MultiSync Monitors.
The MultiSync technology provides you with automatic compatibility
with multiple operating platforms and a vast array of graphics standards
allowing resolution upgrades without upgrading the monitor.
The MultiSync XV17+ monitor strictly follows ErgoDesign guidelines
featuring enhanced human ergonomics (human and earth condition).
The goal of ErgoDesign is to maximise the comfort and productivity of
the end user. ErgoDesign parallels the strict European standards of
power management and reduced emissions. In addition our monitor is
designed to be recyclable.
Screen Technology
The OptiClear Surface of the XV17+ CRT dramatically reduces the
reflection of ambient illumination and glare resulting in greatly
improved user comfort and productivity. This multilayered screen
coating increases the contrast without sacrificing the focus level, clarity
or brightness.
A 0.28 mm dot pitch in conjunction with the Invar Shadow Mask
increases the clarity and displays greater detail. Good clarity allows
your eyes to flow over the screen image and more easily view the
on-screen information.
The flat square CRT technology reduces image distortion and glare.
Plug and Play
Plug and Play is the new Microsoft®solution with Windows®95 to
provide automatic peripheral connections without confusing and
time-consuming setup. When used with a Plug and Play compatible system
and video card, the MultiSync XV17+ monitor automatically tells the
Introduction E - 1
system its identification and capabilities. The system will then select its
highest resolution and refresh rate to take advantage of your MultiSync
monitor.
ErgoDesign
The MultiSync ErgoDesign features enhance human ergonomics
(human and earth conditions). MultiSync monitor’s ErgoDesign will
improve the working environment, protect the health of the user and
save money. ErgoDesign parallels the strict European standards of
power management and reduced emissions:
–automatic display power-down (also known as NUTEK
specification 803299)
–emission characteristics (stricter than those referred to as
reduced electromagnetic fields as recommended by MPR II
and, for JC-1745UMB, also by TCO)
–safety (EN 60950)
MultiSync monitors comply with these standards by offering IPM
System power management and Reduced Magnetic Field technology.
Power Manager
IPM (Intelligent Power Manager) System is an innovative power-saving
utility that complies with both the EPA’s Energy Star requirements and
Europe’s TCO NUTEK’s power management requirements. Energy Star
products use less than 30 watts when in the main power saving mode. The
NUTEK specification 803299 requires automatic power down to less than
30 watts in the suspend mode and less than 8 watts in the off mode.
When in the maximum power-down mode, the MultiSync XV17+
monitor will consume approximately 10% of the total power drawn
under normal operation. This innovation adds up to 90% energy savings,
longer monitor life, environmental protection, reduced emissions and
reduced air conditioning costs of the work environment. The IPM
System increases the monitor’s life and saves energy and costs by
powering down when not in use.
E - 2 Introduction
MultiSync monitors follow the Video Electronics Standard Association
(VESA) approved DPMS power-down signalling method. VESA’s
Display Power Management Signalling (DPMS) method, which is
endorsed by the EPA, is the power-down process a system should use to
communicate to the monitor to save power. Power-down functions can
be utilised only with an Energy Star system or video card which adheres
to the VESA DPMS standard. By using the monitor’s horizontal and
vertical SYNC signals, the monitor can be prompted into the different
IPM modes. The following is the description of the LED indicator for
the IPM power-saving modes:
Mode LED Indicator Power Saving
On Green None
Stand By Green Minimum (Quickest Recovery)
Suspend Yellow Moderate (< 20 Watts, Moderate
Recovery)
Off (IPM Mode) Orange Maximum (< 8 Watts, Slow Recovery)
Off (Power
Switch, Off) No Light No Power Used (Fully Off)
Reduced Emissions
The XV17+ monitor incorporates Reduced Magnetic Field technology
designed to reduce magnetic and alternating electric field emissions and static
electricity. NEC’s monitors follow the strictest magnetic field, alternating
electric field, and electrostatic recommendations of the Swedish Board for
Technical Accreditation, or SWEDAC (previously known as MPR, National
Board for Measurement and Testing). The JC-1745UMB follows the
recommendations of the TCO which specify maximum recommended values
of electric and magnetic fields.
Multiple Frequency Technology
Multiple Frequency Technology automatically adjusts the monitor to the
video card’s scanning frequency, displaying the resolution you desire.
The MultiSync XV17+ color monitor also supports multiple operating
platforms such as PC compatible, Macintosh family and workstation
systems.
Introduction E - 3
Increased refresh rates at all resolutions provide a flicker-free image.
The clearer image is easier on your eyes and extends your viewing time.
A wide range of graphics standards, including VESA standards, is
supported by the MultiSync XV17+ color monitor including:
–640 x 480: 55 - 100 Hz vertical refresh
–800 x 600: 55 - 100 Hz vertical refresh
–1024 x 768: 55 - 100 Hz vertical refresh (non-interlaced, 75 Hz
recommended)*
–1280 x 1024: 55 - 75 Hz vertical refresh (non-interlaced)**
* NEC cites recommended resolutions for optimal display performance
** Maximum resolution based on horizontal and vertical frequencies only.
And Macintosh resolutions, such as:
–MAC II 640 x 480 at 67 Hz ***
–Macintosh 832 x 624 at 75 Hz
–Macintosh 1024 x 768 at 75 Hz
–Macintosh 1152 x 870 at 75 Hz
*** For ergonomical reasons we recommend using non-interlaced
signals with a vertical refresh rate between 75 and 100 Hz.
Horizontal and vertical FullScan capability can increase the display size
of a variety of video modes to the edges of the monitor bezel. The
FullScan capability allows you to use the entire screen area in most
resolutions, significantly expanding image size.
E - 4 Introduction
Contents of the Package
Included with your MultiSync XV17+ color monitor are the following
items:
–MultiSync XV17+ (JC-1745UMB/R) with removable tilt/
swivel stand
–Power cord
–User’s manual
Recommended use
For optimum performance when setting up and using the MultiSync
XV17+ colour monitor, please note the following:
–The optimum monitor position is away from direct sunlight.
–Place the monitor just below eye level for the ideal viewing
angle.
–Allow adequate ventilation around the monitor so that heat can
properly dissipate.
–Do not place any heavy objects on the power cord. Damage of
the cable may cause shock or fire.
Contents of the Package E - 5
Table of contents
Languages:
Other NEC Monitor manuals
NEC
NEC MultiSync EA192M User manual
NEC
NEC LCD1570NX - MultiSync - 15" LCD Monitor Guide
NEC
NEC M40 - MULTEOS - 40" LCD TV User manual
NEC
NEC MultiSync EA304WMi User manual
NEC
NEC LCD52VM - AccuSync - 15" LCD Monitor User manual
NEC
NEC MultiSync LCD1700M Guide
NEC
NEC MultiSync V461 User manual
NEC
NEC AccuSyncAS221WM User manual
NEC
NEC MultiSync LCD4010 User manual
NEC
NEC MultiSync LCD195WXM Parts list manual
NEC
NEC P221W-BK - MultiSync - 22" LCD Monitor User manual
NEC
NEC MultiSync LCD2060NX Guide
NEC
NEC MultiSync X461UNV Guide
NEC
NEC MultiSync LCD1515 User manual
NEC
NEC MultiSync V651-TM User manual
NEC
NEC PlasmaSync 42VM5 User manual
NEC
NEC MultiSync V462-TM Installation and operating instructions
NEC
NEC FE770/FE771 User manual
NEC
NEC LCD1700NX - MultiSync - 17" LCD Monitor User manual
NEC
NEC MultiSync EX231W User guide
