NEC MultiSync X551 UHD IGT User manual

This manual suits for next models

1

Table of contents

Other NEC Monitor manuals

NEC

NEC LCD2070NX - MultiSync - 20" LCD Monitor User manual

NEC

NEC 70 User manual

NEC

NEC LCD2335WXM - MultiSync - 23" LCD TV Guide

NEC

NEC MultiSync E750 User manual

NEC

NEC MultiSync InGlass Touch V Series User manual

NEC

NEC MD461OR Operating and safety instructions

NEC

NEC MultiSync LCD1770GX User manual

NEC

NEC A500 JC-1576VMB User manual

NEC

NEC MultiSync UN462A User manual

NEC

NEC MultiSync EA242WU User guide

NEC

NEC V191W User manual

NEC

NEC MultiSync LCD15T-C User manual

NEC

NEC 1850X User manual

NEC

NEC MultiSync XV17 User manual

NEC

NEC PlasmaSync 60XC10 User manual

NEC

NEC PlasmaSync 42VM5 Manual

NEC

NEC MULTISYNC E900+ User manual

NEC

NEC MultiSync XG-1352 User manual

NEC

NEC V221W Parts list manual

NEC

NEC ShadowSense V Series User manual

NEC

NEC LCD1980SX - MultiSync - 19" LCD Monitor User manual

NEC

NEC PlasmaSync 42XR4 User manual

NEC

NEC PlasmaSync 50XM3 User manual

NEC

NEC JC-1431VMB User manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual

LG

LG M1950D-PZ owner's manual

1 © NEC Corporation 2016

X551 UHD IGT with legs base

X651 UHD-2 IGT with legs base

User’s Manual

2 © NEC Corporation 2016

Please be aware. This manual is a supplement to the monitor’s manufacturer instruction.

It can not be treated as a separate document.

Please follow all warnings and precautions pointed in main manual provided with product.

Table of contents

1. Unpacking unit and fitting legs.................................................... 3

2. Connecting cables ................................................................... 12

3. Touch Screen Calibration.......................................................... 12

3 © NEC Corporation 2016

1. Unpacking unit and fitting legs

NOTE :

Due to mass of final product for installation and handling 4 people are

required . Do not start unless you have enough people available , fitting with

less people may result in injuries and damaged product.

Product is provided in two boxes:

4 © NEC Corporation 2016

Unpack monitor from the box and put it flat on the floor with Cardboard still attached

at the front of screen to cover it from scratches.

NOTE :

Do not remove Cardboard from the front of the screen.

5 © NEC Corporation 2016

Unpack legs and top plate from box.

Prepare screws and key from accessory box.

Make sure that anti shake washers are on bolts and M4/M8 screws.

Put in X section of legs

Screw in 8 screws in marked positions for each leg.

6 © NEC Corporation 2016

Note : Leg attach should hold leg base section while it is being mount to the

legs.

THE LEG BASE SHOULD BE SUPPORTED WHILST IT IS BEING ATTACHED TO

THE IDIVIDUAL LEGS USING M8 BOLTS AND ANTI-SHAKE WASHERS

(RACHET PROVIDED, 2X BOLTS 2X WASHERS PER LEG)

Turn over leg base and attach top plate by screws provided in accessory box.

7 © NEC Corporation 2016

Unscrew and remove all the handles , table base will be fitted in their place.

.

Remove all screws marked on above picture.

NOTE: This action causes looseness of back plates. 4 people have to be presented

during placing display on legs base.

8 © NEC Corporation 2016

There is a top and bottom side of legs base.

9 © NEC Corporation 2016

With 4 people holding each corner of display place it on the legs base.

Note : Do not put screen on the side during that action , It may result in touch screen

permanent damage and or matrix malfunction.

Remove styrofoam along with cardboard

Remove foil from the touch screen before you connect cables.

Now you can connect all cables.

The touch screen is HID 'Plug and Play' with no driver required.

10 © NEC Corporation 2016

X551 UHD