NEC MultiSync M Series User manual

Installation Manual

Option Board

MultiSync®M series, P series, MA series

This manual describes the Option Board installation procedure for installers.

Please check the User’s Manual before installing the Option Board for additional information.

English−1

Installing an Option Board

You can install Option Boards that are compatible with Intel®Smart Display Module Small (Intel®SDM-S) and Intel®Smart

Display Module Large (Intel®SDM-L) specifications.

1. Turn off the main power switch.

2. If signal cables or the power cord is connected to the monitor, please disconnect them.

3. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily

support the weight of the monitor.

NOTE:To avoid scratching the LCD panel, always place a soft cloth, such as a blanket that is larger than the monitor’s

screen area, on the table before laying the monitor face down. Make sure there is nothing on the table that can

damage the monitor.

4. Intel® SDM-S:

Remove SLOT COVER a.

SLOT COVER

Raspberry Pi Compute Module:

Remove SLOT COVER b.

SLOT COVER

Intel®SDM-L:

Remove SLOT COVER aand b(Figure 1).

Slide the CENTER RAIL to the right and remove it. Reverse the process to reattach it (Figure 1-1).

Figure 1

SLOT COVER

Figure 1-1

CENTER RAIL

English−2

5. Insert the Option Board into the monitor and affix it in place with the removed screws used for slot cover (Figure 2).

(Recommended fasten force: 50~80 N•cm).

Figure 2

Intel®SDM-S

Intel®SDM-L

Raspberry Pi Compute Module

NOTE:Unless your monitor is purchased as part of a special bundle package, no Option Boards will be in the box or installed

in the monitor. These are optional accessories available for separate purchase. Please contact your supplier for a list of

Option Boards available for your monitor.

Make sure the board is inserted into the slot in the correct orientation.

Do not apply excessive force to manipulate the Option Board before attaching it with screws.

WARNING:Ensure the Option Board is securely fastened using the original screws to prevent the OPTION from falling out

the product. A falling Option Board may expose you to danger.

For installation videos, please visit our website.

Raspberry Pi Compute Module Intel®Smart Display Module Large

MultiSync is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan and other countries.

Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries.

All other brands and product names are trademarks or registered trademarks of their respective owners. Rev. 2

Other manuals for MultiSync M Series

This manual suits for next models

Table of contents

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual