Nayatel Air-Mouse User manual
How to Use
Step 1: Plug-in the USB
Nano receiver inside the
USB port of Smart TV or Joy
Box. The system will
automatically install the
driver software
Step 2: Control the remote
mouse cursor on the
device by moving it in the
air. The movement of the
remote mouse controls the
direction of the pointer.
Note: You can turn the mouse
pointer off by pressing the
"CURSOR LOCK" button.
Press it again to turn the
mouse pointer on.
Auto Sleep and Low Power
After 20 seconds, the remote
will go into standby mode. To
use the device, press any key.
Blinking green light (without
any key pressed) indicates
low power of the remote
mouse. You can recharge it
with micro USB Cable.
Bluetooth/Infrared mode
The remote mouse’s default
mode is Bluetooth. Short press
the "OK" + "MENU" button on the
remote mouse to switch to
Infrared mode. Press it again to
switch to Bluetooth mode.
Note: Infrared mode can be
used to replace the buttons of
TV Remote with Remote Mouse
buttons.
Bluetooth Mode: Green Light
Infrared Mode: Red Light
V1.0
REMOTE MOUSE
Air Mouse IR Remote Keyboard
REMOTE MOUSE
OK
VOL+
OK/
MOUSE_L CLICK
MENU
BROWSER
Email
CURSOR LOCK
POWER
VOL-
ARROW KEY
Back/
MOUSE_R CLICK
HOME
MUTE
CONTACT US:
UAN: 111 11 44 44
V1.0
REMOTE MOUSE
Replacing TV Remote buttons
with Remote Mouse
Example: Power Key
Step 1. Short press "OK" +
“Menu” button of the remote
mouse to switch to infrared
mode.
Step 2. After Step A, long press
"OK" + "MENU" button for 3
seconds till the red LED of the
remote mouse becomes stable.
Step 3. Keep the remote mouse
and TV remote head to head
within 2cm.
Step 4. Press the Power key of
the remote mouse and the red
light will start blinking.
Step 5. Then press the power
key of the TV remote for 3
seconds.
Step 6. Now you can use the
power button of the remote
mouse to turn your TV on
and off.
Note: You can replace any
button of your TV remote with
any button of the remote
mouse in the similar manner
described above.
Other Nayatel Mouse manuals
