Napoleon EF39HD User manual

W415-0752 / 12.12.08

$10.00 W415-0752 / 12.12.08

INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE

CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE

INSTALLATION AND

OPERATION INSTRUCTIONS

Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada s(705)721-1212 sfax(705)722-6031

www.napoleonreplaces.com s[email protected]

For customer service inquiries, please call 1-866-592-6667

(9:00am - 5:00pm PST)

CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS: CSA C22.2 No-46 / UL 1278 CSA STANDARD

EF39HD

ELECTRIC FIREPLACE

CERTIFIED FOR CANADA AND UNITED STATES USING ANSI/CSA METHODS.

SAFETY INFORMATION

- Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any

other appliance.

If the information in these instructions are not

followed exactly, an electrical shock or fire

may result causing property damage, personal

injury or loss of life.

WARNING

W415-0752 / 12.12.08

NOTE: Changes, other than editorial, are denoted by a vertical line in the margin.

• Do not operate heater before reading and understanding operating instructions. Failure to operate heater according to

operating instructions could cause fire or injury.

• Risk of burns. The heater should be turned off and cooled before servicing.

• Do not install damaged, incomplete or substitute components.

• Do not burn wood or other materials in this fireplace.

• Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to

avoid burns or clothing ignition. Supervise young children when they are in the same room as the fireplace.

• Clothing or other flammable material should not be placed on or near the fireplace.

• Due to high temperatures, the fireplace should be located out of traffic and away from furniture and draperies.

• Ensure you have incorporated adequate safety measure to protect infants/toddlers from touching hot surfaces.

• Even after the fireplace is out, the glass and/or screen will remain hot for an extended period of time.

• Check with your local hearth specialty dealer for safety screens and hearth guards to protect children from hot

surfaces. These screens and guards must be fastened to the floor.

• Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace.

• It is imperative that the control compartments, circulating blower and its passageway in the fireplace and are kept

clean. The fireplace should be inspected before use and at least annually by a qualified service person. More frequent

cleaning may be required due to excessive lint from carpeting, bedding material, etc. The fireplace area must be kept

clear and free from combustible materials, gasoline and other flammable vapors and liquids.

• Under no circumstances should this fireplace be modified.

• This fireplace must not be connected to a chimney flue pipe serving a separate solid fuel burning appliance.

• Do not use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect

the fireplace and to replace any part of the control system which has been under water.

• Do not operate the fireplace with the glass door removed, cracked or broken. Replacement of the glass should be

done by a licensed or qualified service person.

• Do not strike or slam shut the fireplace glass door.

• Keep the packaging material out of reach of children and dispose of the material in a safe manner. As with all plastic

bags, these are not toys and should be kept away from children and infants.

WARNING

table of contents

1.0 introduction

1.0 INTRODUCTION 2

1.1 WARRANTY 3

1.2 DIMENSIONS 4

1.3 LISTING APPROVALS 4

1.4 GENERAL INSTRUCTIONS 5

2.0 LOCATING APPLIANCE 7

2.1 UNPACKING AND TESTING APPLIANCE 7

2.2 GROUNDING APPLIANCE 7

3.0 INSTALLATION 8

3.1 MINIMUM CLEARANCE TO COMBUSTIBLES 8

3.2 INSTALLING THE APPLIANCE 8

3.4 GLASS EMBER INSTALLATION 9

3.5 GLASS FRONT INSTALLATION 10

4.0 FINISHING 10

4.1 MINIMUM MANTEL CLEARANCES 10

5.0 OPERATING INSTRUCTIONS 11

5.1 MAIN POWER SWITCH 11

5.2 OPERATING BY REMOTE CONTROL 11

6.0 MAINTENANCE 12

6.1 REPLACING THE FLAME GENERATION LIGHT BULBS 13

6.2 REPLACING THE EMBER BED LIGHT BULBS 14

7.0 REPLACEMENT PARTS 15

8.0 TROUBLESHOOTING 16

9.0 SERVICE HISTORY 16

W415-0752 / 12.12.08

1.1 warranty

Electrical components and wearable parts such as fan/heater, motors, switches, nylon bearing components

and remote controls are covered and NAPOLEON® will provide replacement parts free of charge during the

first year of limited warranty.

Light bulbs and fuses are NOT covered by the warranty.

Any labour related to warranty repair is not covered.

NAPOLEON® ELECTRIC FIREPLACE PRESIDENT’S LIFETIME LIMITED WARRANTY

CONDITIONS AND LIMITATIONS

NAPOLEON® warrants its products against manufacturing defects to the original purchaser only -- i.e., the individual or legal entity (registered

customer) whose name appears on the warranty registration card filed with NAPOLEON® -- provided that the purchase was made through an

authorized NAPOLEON® dealer and is subject to the following conditions and limitations:

This factory warranty is non-transferable and may not be extended whatsoever by any of our representatives.

Installation must be done in accordance with the installation instructions included with the product and all local and national building and fire

codes.

This limited warranty does not cover damages caused by misuse, lack of maintenance, accident, alterations, abuse or neglect and parts installed

from other manufacturers will nullify this warranty.

This limited warranty further does not cover any scratches, dents, corrosion or discoloring caused by excessive heat, abrasive and chemical

cleaners nor chipping on porcelain enamel parts, mechanical breakage of PHAZER™ logs.

In the first year only, this warranty extends to the repair or replacement of warranted parts which are defective in material or workmanship

provided that the product has been operated in accordance with the operation instructions and under normal conditions.

NAPOLEON® will not be responsible for installation, labour or any other expenses related to the reinstallation of a warranted part and such

expenses are not covered by this warranty.

Notwithstanding any provisions contained in the President's Limited Lifetime Warranty, NAPOLEON’s responsibility under this warranty is defined

as above and it shall not in any event extend to any incidental, consequential or indirect damages.

This warranty defines the obligations and liability of NAPOLEON® with respect to the NAPOLEON® electric fireplace and any other warranties

expressed or implied with respect to this product, its components or accessories are excluded.

NAPOLEON® neither assumes, nor authorizes any third party to assume, on its behalf, any other liabilities with respect to the sale of this

product.

Any damages to fireplace, brass trim or other component due to water, weather damage, long periods of dampness, condensation, damaging

chemicals or cleaners will not be the responsibility of NAPOLEON®.

The bill of sale or copy will be required together with a serial number and a model number when making any warranty claims from your

authorized dealer. The warranty registration card must be returned within fourteen days to register the warranty.

NAPOLEON® reserves the right to have its representative inspect any product or part thereof prior to honouring any warranty claim.

NAPOLEON® electric fireplaces are manufactured under the strict Standard of the world recognized

ISO 9001 : 2000 Quality Assurance Certificate.

NAPOLEON® products are designed with superior components and materials, assembled by trained craftsmen

who take great pride in their work. Once assembled the complete fireplace is thoroughly inspected by a qualified

technician before packing to ensure that you , the customer, receive the quality product that you expect from

NAPOLEON®.

W415-0752 / 12.12.08

1.2 dimensions

1.3 listing approvals

This appliance has been tested in accordance with the CSA Standards for xed and location-dedicated electric

room appliances in the United States and Canada. If you need assistance during installation, please contact

your local dealer.

NOTE: This appliance must be electrically wired and

grounded in accordance with local codes or, in the absence

of local codes, with National Electric Code ANSI/NFPA

70-latest edition or the Canadian Electric Code, CSA C22.1

as appropriate.

Model Number EF39HD

Description Wall-Mount Appliance

Voltage 120V AC

Watts MAX 1500W

Amps 15 AMP Grounded Circuit

Appliance Width 39.21"

Appliance Height 28.07"

Appliance Depth 7.250"

Net Weight 66.08 lbs

Gross Weight 81.50 lbs

Top View

Back View

Side View

26.500”

7.250”

39.210”

28.070”

Front View

Bottom View

37.240”

Power Switch

Heater Vents

(Do not cover)

29.125”

FIGURE 1.2.1 FIGURE 1.2.2 FIGURE 1.2.3

FIGURE 1.2.4

FIGURE 1.2.5

W415-0752 / 12.12.08

WARNING

This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured

homes when installed according to theses instructions.

1. Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet

are on.

2. The appliance may emit a slight, harmless odour when rst used. This odour is normal and it is caused by

the initial heating of internal appliance elements and will not occur again.

3. If your appliance does not emit heat, consult the operation section of this manual for further information.

4. Use with a CSA or UL certied surge protector.

1.4 general instructions

Read these instructions completely before beginning installation. failure to follow them could cause

a appliance malfunction resulting in serious injury and/or property damage.

All electric appliances have hot and arcing or sparking parts inside. Do not use it in areas where

gasoline, paint or ammable liquids are present.

This electric appliance is tested and listed for use only with the optional accessories listed in these

instructions. Use of optional accessories not specically tested for this electric appliance could void

the appliance warranty and/or result in a safety hazard.

Risk of electric shock.

Do not open.

No user-serviceable parts inside.

Do not use damaged electrical cords.

Servicing should be done only while the appliance is disconnected from the power supply circuit.

High temperature, risk of re. Keep electrical cords, drapery, furnishings, and other combustibles at

least 36" from the front of the appliance and away from sides and rear.

W415-0752 / 12.12.08

When using electric appliances, basic precautions should always be followed to reduce the risk of re, electric

shock, and injury to persons, including the following:

1. Read all instructions before using this appliance.

2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use

handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding,

papers, clothes, and curtains at least 36" from the front of the appliance and keep them away from the

sides and rear.

3. Extreme caution is necessary when this appliance is used by or near children and whenever the appliance

is left operating and unattended.

4. Always unplug appliance when not in use.

5. Do not operate this appliance with a damaged cord or plug after the appliance malfunctions, has been

dropped or damaged in any manner. Return appliance to authorized service facility for examination,

electrical or mechanical adjustment, or repair.

6. Do not use outdoors.

7. This appliance is not intended for use in bathrooms, laundry areas and similar indoor locations. Never

locate appliance where it may fall into a bathtub or other water container.

8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord

away from trafc area and where it will not be tripped over.

9. To disconnect appliance, turn controls to off, then remove plug from outlet.

10. Connect to properly grounded outlets only.

11. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an

electric shock or re, or damage the appliance.

12. To prevent a possible re, do not block air intakes or exhaust in any manner. Do not use on soft surfaces,

like a carpet, where openings may become blocked.

13. Use this appliance only as described in this manual. Any other use not recommended by the

manufacturer may cause re, electric shock, or injury to persons.

14. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of re.

However, if an extension cord must be used, the cord shall be No.14 AWG minimum size and rated not

less than 1875 watts.

SAVE THESE INSTRUCTIONS.

W415-0752 / 12.12.08

2.0 locating appliance

WARNING

2.1 unpacking and testing appliance

Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance

operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet.

2.2 grounding appliance

This appliance is for use on 120 Volts. The cord has a plug as

shown in (A) of Figure 1 given below. An adapter as shown in

to two-slot receptacles. The green grounding lug extending from

the adapter must be connected to a permanent ground such as

a properly grounded outlet box. The adapter should not be used

if a three-slot grounded receptacle is available.

To disconnect appliance, turn controls to off, then remove plug

from outlet.

FIGURE 2.2

Due to high temperatures, this electric appliance should be located out of trafc. Keep combustible

materials such as furniture, pillows, bedding, papers, clothes and curtains at least 36" from the front

of the appliance.

Never locate this electric appliance where it may fall into a bathtub or other water container.

Wear safety gloves and safety glasses for protection during installation and maintenance.

To prevent contact with sagging or loose insulation, the electric appliance must not be installed

against vapor barrier or exposed insulation. Localized overheating could occur and a re could

result.

Do not expose the electric appliance to the elements (such as rain, etc.)

W415-0752 / 12.12.08

RISK OF FIRE! The power cord must not be pinched against a sharp edge. Secure cord to avoid trip-

ping or snagging to reduce the risk of re, electric shock or personal injury. Do not run cord under

carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from trafc

areas and where it will not be tripped over.

RISK OF FIRE! To prevent a possible re, do not block air intake or exhaust in any manner. Do not

use on soft surfaces where openings may become blocked.

RISK OF FIRE! Do not blow or place insulation against the appliance.

This electric appliance is tested and listed for use only with the approved optional accessories. Use

of optional accessories not specically tested for this electric appliance could void the warranty and/

or result in a safety hazard.

If the information in these instructions is not followed exactly, a re or explosion may result causing

property damage, personal injury or death. Do not store or use gasoline or other ammable vapors

in the vicinity of this or any other appliance.

This appliance is heavy. It is highly recommended that two people install this appliance.

Heater vents on the electric appliance cannot, in any way, be covered as it may create a re hazard.

Bottom 19 3/4"

Sides 4"

Back 0"

Due to the many different materials used on different walls, it is highly recommended that you consult your

local builder before you install this appliance on the wall.

1. Select a location that is not prone to moisture and is located at least

36" away from combustible materials such as curtain drapes, furniture,

bedding, paper, etc.

2. Have two people hold the appliance against the wall to determine the nal location.

3. With the appliance in position and level measure from the oor to the top back edge as

illustrated.

4. The supplied wall mount bracket will be centered on the back of the appliance.

This bracket has four slots and three hooks on it. The top slots will be located

1.250” down from the previously measured top back edge. The bottom slots will

be 2.250” down from this edge.

3.0 installation

WARNING

3.1 minimum clearance to combustibles

3.2 installing the appliance

Side View

Measure

19.750”

Top back edge

Floor

Measurements are taken from the glass front.

Top 2 1/2" to mantel

Top 4 1/2" to ceiling

W415-0752 / 12.12.08

5. Mark out location, then mount the bracket onto the

wall using the four supplied screws. Ensure the top

slots measurement from the oor is 1.250” lower then

the top back edge measured earlier. This bracket

MUST have the hooks facing upward and be level.

NOTE: It is strongly recommended that the

mounting bracket be screwed into the wall studs

where possible. If the wall studs cannot be used,

ensure that the supplied plastic anchors are used

to afx the bracket to the wall and the bracket is

adequately secured.

6. With the wall mounting bracket installed have two people lift the

appliance up and insert the three hooks on the bracket into the three

slots on the back of the appliance.

7. Check the appliance for stability ensuring that the bracket will not pull

free from the wall, causing the appliance to fall.

Screws

Hooks Wall Mount

Bracket

Back View

Slots

3.4 glass ember installation

Glass front must be removed and the appliance must be mounted in

its nal location before the glass embers are installed.

Glass embers may have sharp edges, wear safety glasses and

gloves when handling.

1. Carefully place glass embers into the bottom tray on the front of

the appliance as illustrated.

2. Apply an even layer of glass embers. Clean up any fallen pieces

and install glass front.

W415-0752 / 12.12.08

4.0 finishing

Power supply service must be completed prior to nishing to avoid reconstruction.

Heater vents and air openings cannot be covered in any circumstances.

WARNING

4.1 minimum mantel clearances

When using paint or lacquer to nish the mantel, the paint or lacquer must be heat resistant to

prevent discolouration.

WARNING

FIGURE 4.1

3.5 glass front installation

It is recommended that two people install this glass front onto the

appliance, Wear safety glasses and gloves when handling glass.

1. Hold up the glass front onto the appliance (logo side out).

2. Line up the four holes in the glass with the four threaded holes

in the appliance.

3. Use the four supplied bolts with the supplied washers. Insert the

bolts through the glass front and into the threaded holes, and

nger tighten as illustrated.

Do not over tighten the bolts. Over tightening the bolts may result in glass breakage.

WARNING

Side View

2 1/2”

Mantel

Floor

Wall

Other manuals for EF39HD

Table of contents

Other Napoleon Indoor Fireplace manuals

Napoleon

Napoleon B30NTR User manual

Napoleon

Napoleon CBI360-2N User manual

Napoleon

Napoleon GDS60-1NSP User manual

Napoleon

Napoleon GDIZC - N User manual

Napoleon

Napoleon Ascent 30 User manual

Napoleon

Napoleon Haliburton GDS28N User manual

Napoleon

Napoleon Madison GD80NT User manual

Napoleon

Napoleon EPA 1100 User manual

Napoleon

Napoleon GD34-1NT User manual

Napoleon

Napoleon Oakville Series User manual

Napoleon

Napoleon NEFP32-5320BW-EU User manual

Napoleon

Napoleon EPI3TN User manual

Napoleon

Napoleon GD34-1NT User manual

Napoleon

Napoleon LV38N User manual

Napoleon

Napoleon PATIOFLAME GPFGN and User manual

Napoleon

Napoleon XIR4-1N User manual

Napoleon

Napoleon Ascent NEFB33H User manual

Napoleon

Napoleon GT8PSB User manual

Napoleon

Napoleon GD40-N User manual

Napoleon

Napoleon BGD36CFNTR User manual

Napoleon

Napoleon B81NS User manual

Napoleon

Napoleon Madison GD80NT Installation instructions

Napoleon

Napoleon TriVista Series User manual

Napoleon

Napoleon EF39S User manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual

Miles Industries

Miles Industries Vogue 1300IRN Installation & operating instructions