MuxLab 500087 User manual

This manual suits for next models

1

Popular Media Converter manuals by other brands

SoundTraxx

SoundTraxx Blunami BLU-2200 user guide

SPROLINK

SPROLINK VA1 user manual

Acclaim Lighting

Acclaim Lighting DDC-1-AC user guide

Nikon

Nikon AF-S TC-20E III user manual

Axis

Axis AXIS Q7406 user manual

Omega

Omega TAC80B-J instruction sheet

Zoom

Zoom Thunderbolt TAC-2R Operation manual

OST

OST iConverter 10/100M quick start guide

Vertiv

Vertiv Netsure user manual

birddog

birddog MINI user guide

Roland

Roland GI-10 owner's manual

Wallenstein

Wallenstein WX310 Operator's manual

Pace

Pace MSS 200-1 Service manual

Solar Converters

Solar Converters EQ 12/24-50 manual

CYP

CYP EL-7400V Operation manual

TIE

TIE MIDI 1i1o user manual

DCS

DCS Vivaldi Upsampler user manual

Westermo

Westermo MCW-211 SERIES user guide

© MuxLab Inc. 94-000796-A

8495 Dalton Rd, Montreal, Quebec, Canada. H4T 1V5

Tel: (514) 905-0588 Fax: (514) 905-0589

E-mail: videoease@muxlab.com URL: www.muxlab.com

Specifications

Environment

Digital Audio

Standard Supported

LPCM, Dolby Digital® 5.1, DTS, and Dolby® True HD

Input / Output signal

S/PDIF coax cable or TOSLINK optic cable

Data transmission rate

Up to 6 Mbit/s

Connectors

RCA, TOSLINK, POWER, RJ45 on each unit

Power requirement

1W max, 5V DC

S/PDIF spec

Coax 75 ohm with RCA connector,

level: 500mVp-p into 75 ohm

TOSLINK spec

Plastic optic cable with EIAJ/JEITA RC-5720C connector,

Wavelength: red 660nm, level: -15dBm max

Cabling Requirement

(not supplied)

Coax and the second optic cable

Included in this kit

1 x Converter unit, 1 x 5V Power supply,

1 x Optic Cable 3ft (1m) and 1 x Installation guide

Compatible mounting

hardware

500902, 500900, 500910, 500915

Temperature

Operating: -40° to 85°C (-40° to 185°F)

Storage: -40° to 85°C (-40° to 185°F)

Humidity

Maximum 95% (non-condensing)

Enclosure

ABS UL94HB fire retardant plastic

Dimensions

2.25” x 2.25” x 1.0” (6 x 6 x 2.5 cm)

Shipping Weight

Less than 1 lb. (450g)

Warranty

2 Years

Order Information

500087 Digital Audio Converter

DIGITAL AUDIO CONVERTER

500087

Quick Installation Guide

Overview

The Digital Audio Converter allows one (1) source of digital audio signal: coax

(S/PDIF) or optic (TOSLINK) to be converted to an optic or a coax signal respectively.

It supports most standards used to transmit two channels of uncompressed lossless PCM

audio or compressed 5.1/7.1 surround sound such as Dolby Digital Plus or DTS-HD

High Resolution Audio (multichannel digital audio Dolby Digital® 5.1, DTS, and

Dolby® True HD).

Applications

Conversion and Transmission of Digital Audio Signal

© MuxLab Inc. 2015

Installation

One unit can be connected to convert coax source to optic fiber source. You can use it

also to convert an optical fiber source to a coax source. Both directions can be used at

same time. To install the unit, perform the following steps:

Caution: Do not attempt to open the housing. There are no user-serviceable parts

inside the unit. Opening the unit will void your warranty.

Do not connect the unit to a telecommunication outlet wired to unrelated

equipment. Making such a connection may damage the equipment and/or

the unit. Verify that the desired twisted pairs are not being used for other

LAN or telephone equipment.

1. Connect a coax and an optic fiber between your source and your AV system. Be sure

you are using the right input and output connector.

2. Connect the 5V power supply.

Troubleshooting

The following tables describe some of the symptoms, probable causes and possible solutions regarding

the unit:

Symptom

Probable Cause

Possible Solutions

No audio or

intermittent audio

No signal from source

Source off.

Power missing. Check led.

Check or replace both cables. Be sure you

did not mixed input with output.

Malfunctioning unit.

If you still can’t diagnose the problem, please call MuxLab Customer Technical Support at

877-689-5228 (toll-free in North America) or (+1) 514-905-0588 (International).