MuxLab 100508 User manual
100508
User Manual
4x4 HDMI Matrix Switch, 4K/60
Overview
This product is a 4 in 4 out HDMI Matrix with Ultra HD up to 4k60
4:4:4 8bit HDR and HDCP2.2. It reliably distributes four HDMI source
signal to four HDMI displays. Also provide audio de-embedded via
coaxial port for each HDMI port. All output port support 4K scale
down to 1080P.
The product can be controlled by front panel buttons, IR, RS232, and
IP/web UI. Also we provide API commands for your control system.
It is ideal for applications such as Home theatre, offices, school,
conference rooms, shopping malls, hotels and museums, which
require manage multiple sources and distribute an HDMI source
signal to multiple displays.
PRODUCT PHOTO
INTRODUCTION
FEATURES
⚫Distributes four HDMI sources signal to four HDMI displays
⚫HDMI2.0 with 4K@60 4:4:4 8bit and HDCP 2.2 compliant
⚫Support HDR 10 and Dolby version
⚫Support 4K scale down to 1080P
⚫Support remote control, button, RS232, Telnet & Web GUI
⚫Support Audio DE-embed, coaxial audio out without display
⚫Support 3D, Support deep color 30bit, 36bit
⚫Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC
⚫Digital audio format, pass through as DTS-HD/Dolby-trueHD/
LPCM7.1/DTS/Dolby-AC3/DSD, Dolby Atoms, and all other HDMI
standard formats
⚫Support signal retiming, No loss of quality
⚫No driver required, Plug and play, Installs in minutes
SPECIFICATIONS:
1) HDMI version………………………….. HDMI 2.0
2) HDCP version…………………………....HDCP2.2
3) HDMI resolution….…..24/50/60fs/4K*2K/1080p
/1080i/720p/576p/576i/480p/480i
4) Support video format ........24bit/30bit,36bit deep color
5) Support audio format…………………….DTS-HD/
Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD/Dolby Atoms
6) Max bandwidth……………………………..600MHz
7) Max baud rate.……………………………..6Gbps
8) Input/Output TMDS signal ..0.5~1.5Volts p-p(TTL)
9) Input/Output DDC signal ………… 5Volts p-p (TTL)
12) Max working current…………………….....1.5A
13.Power adapter format.. …………...Input:AC (50HZ
, 60HZ) :100V-240V; Output: DC12V/2A
14) Operatin2g Temperature range…… (-15 to +55℃)
15) Operating Humidity range…………….5 to 90%RH (No Condensation)
16) Dimension (L x W x H)…………220*130*25(mm)
17) Weight…..………………….…..………………380g
Operating and Connecting：
1.Connect one cable from each HDMI source devices to HDMI input.
2.Connect one cable from each display (monitor or projector) to the HDMI
outputs.
Setting
RS232 control
Advanced user may need to control the matrix via RS232,
connect a PC or control system. Professional rs232 serial
interface software (e.g. UART Assist) may be needed as well.
Before executing API commands through RS232, ensure the
RS232 port of the matrix and control PC are set correctly.
See below are main commands for control
Note: All commands need typing ‘enter’ at the end.
Command
Function
EZH
System help, it will show all commands
EZSTA
Show System Status
EZS RST
Reset to Factory Defaults
EZS DEBUG MODE1 EN
Set Cascade Mode Enable (Turn OFF HDCP)
EZS DEBUG MODE1 DIS
Set Cascade Mode Disable (Turn ON HDCP)
EZS OUTx VS INy
Set Output x To Input y {x=[0~4](0=ALL), y=[1~4]}
EZS OUTx EXA EN
Set Ex-Audio Output Enable {x=[0~4](0=ALL)}
EZS OUTx EXA DIS
Set Ex-Audio Output Disable {x=[0~4](0=ALL)}
EZS OUTx STREAM ON
Set Output x Stream ON {x=[0~4](0=ALL)}
EZS OUTx STREAM OFF
Set Output x Stream OFF{x=[0~4](0=ALL)}
EZS INx EDID y
Set Input x EDID{x=[0~4](0=ALL), y=[0~32]}
EZS HIP xxx.xxx.xxx.xxx
Set Host IP Address to xxx.xxx.xxx.xxx
EZG HIP
Get Host IP Address
More details for EDID list and IP setting, please send “EZH”to
get help list.
IP control
Connect the USB or RS232 to PC, using the RS232 interface to send command”
EZG HIP”, you will get the IP address of the matrix.
Make sure your PC and the matrix on the same network.
Typing in the IP address in a browser
Note: please begin with http://
e.g: You get a IP address 192.168.101.20
please typing in http:// 192.168.101.20
And you will see four sections
Sense Switch, select inputs for each output.
Audio Setting, turn on/off audio breakout
EDID Manage, select EDID for each input, there are more than 40 kinds of
EDID options.
System setting, set IP address and alias name.
Other manuals for 100508
1
Table of contents
Other MuxLab Matrix Switcher manuals
MuxLab
MuxLab 500415 User manual
MuxLab
MuxLab 500210 User manual
MuxLab
MuxLab 500413 User manual
MuxLab
MuxLab 500470 User manual
MuxLab
MuxLab 100508 User manual
MuxLab
MuxLab 500416-POE-US User manual
MuxLab
MuxLab 500418-POE User manual
MuxLab
MuxLab PRODIGITAL 500442 User manual
MuxLab
MuxLab 500418-POE-UK User manual
MuxLab
MuxLab 500412-V2 User manual
