MuxLab Prodigital 500446 User manual
© Muxlab Inc. 2020 94-000937-A / SE-000937-A
4X2 HDMI 2.0 Quad-View Processor
Operation Manual
500446
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 2
SAFETY PRECAUTIONS
To insure the best performance from the product, please read all instructions carefully before using the device. Save
this manual for future reference.
⚫Follow basic safety precautions to reduce the risk of fire, electrical shock and injury.
⚫Do not dismantle the housing or modify the module. It may result in electrical shock or burns.
⚫Do not open or remove the housing of the device as you may be exposed to dangerous voltage or other
hazards.
⚫To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install this product near
water. Keep the product away from liquids.
⚫Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or
spills on to the housing, unplug the module immediately.
⚫Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
⚫Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
⚫Refer all servicing to qualified service personnel.
⚫Install the device in a place with adequate ventilation to avoid damage caused by overheat.
⚫Unplug the power when left unused for a long period of time.
⚫Information on disposal of devices: do not burn or mix with general household waste, please treat them as
normal electrical waste.
NOTICE: Please read this manual carefully before using this product.
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 3
Table of Contents
1.Introduction...............................................................................................................................................................3
2. Features ....................................................................................................................................................................4
3. Package Contents......................................................................................................................................................4
4. Specifications............................................................................................................................................................5
5. Panels Description ....................................................................................................................................................6
5.1 Front Panel.......................................................................................................................................................6
5.2 Rear Panel........................................................................................................................................................6
6. Remote Control.........................................................................................................................................................7
7. Operate and Connect................................................................................................................................................8
Regulatory Compliance...............................................................................................................................................21
1.Introduction
The 4x2 HDMI 2.0 Quad-View Processor supporting 4K/60 (4:4:4) resolution provides the most flexible and cost
effective solution in the market to route ultra-high definition video sources from any of the four UHD HDMI sources
to the remote display at the same time. This solution is also well suited for use in digital signage, conference room
presentation systems or other similar settings or applications.
With up to 4K/60 (4:4:4) output resolution, users can display the mixed video with improved presentation quality.
This unit can be controlled thru an RS232 serial port and Ethernet port to provide flexible control methods to fit
numerous applications. May also be controlled via IR remote and front panel buttons.
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 4
2. Features
⚫4 HDMI inputs and 2 HDMI outputs
⚫Input resolution support from 640x480 to 4096x2160@60Hz (4:4:4 8bits), interlaced or progressive
⚫Output resolution support up to 4096x2160@60Hz (4:4:4 8bits)
⚫Adjustable size & position through software and Cloud
⚫Supports PIP, PBP, POP, full screen & quad-view display
⚫HDCP 1.4/2.2 compliant
⚫Firmware upgradable to support new features and product enhancements
⚫Supports titles, borders and colored backgrounds
⚫Supports Background picture & logo update
⚫Resize, position, zoom & pan and blend output video
⚫Supports seamless, fade-in-&-out, wipe and dissolve switching in full screen mode
⚫Perfect as a video converter and a live video switcher
⚫Pure unaltered uncompressed 7.1ch digital HDMI
⚫Software control through RS-232 and Ethernet
⚫Supports IR remote and front panel control
⚫Supports Cloud Control (Cloud support is through encrypted communication for security/privacy protection)
3. Package Contents
⚫One (1) 4x2 HDMI 2.0 Quad-View Processor
⚫One (1) 12VDC/3.33A power adapter
⚫One (1)Installation Guide
⚫One (1) IR Remote control
⚫One (1) IR Sensor
⚫One (1) Quick Reference sheet
Notes：Confirm that the product and accessories are all included. If not, please contact the supplier from which
you purchased the unit.
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 5
4. Specifications
Model Name
500446
Technical
Role of usage
Multi-viewer / video processor
Background picture update
Yes
HDCP compliance
1.4 / 2.2
HDMI compliance
HDMI 2.0a
Video bandwidth
HDMI [594MHz [18Gbps]
Output Video Support
Up to 4K@60Hz (4:4:4 8bits)
Input Video Support
Up to 4K@60Hz (4:4:4 8bits)
Video Format Support
HDMI 2.0
Audio support
Bypass (signal pass-thru)
Control
RS-232/ Ethernet/ IR/ Front panel Control/ Cloud
Embedded video mixer
Yes
Input TMDS signal
1.2 Volts [peak to peak]
ESD protection
Human body model —±15kV [air-gap discharge] & ±8kV [contact discharge]
Input
Four HDMI, one RS-232, one RJ-45 (Ethernet) & one 3.5mm
Output
Two HDMI & Two RCA Jack
HDMI connector
Type A [19-pin female]
RS-232 connector
DB-9 [9-pin D-sub female]
RJ-45 connector
WE/SS 8P8C
Mechanical
Housing
Metal enclosure
Dimensions
(L x W x H)
Model
390 x 248 x 44mm [1'3" x 9.8" x 1.7"]
Package
526 x 318 x 156mm [1'7" x 12.5" x 6.1"]
Carton
543 x 335 x 344mm [1'8" x 13.2" x 1'1"]
Weight
Model
2.2 kg [5 lbs]
Package
3.3 kg [7.3 lbs]
Power supply
12VDC 3.33A
Power Consumption
22 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 6
5. Panels Description
5.1 Front Panel
No.
Name
Description
1
Window
Source
Selection
Select the Window source A, B, C & D.
2
Presets
Recall preset 1 or preset 2.
3
Quad
Fast Selection to view Quad-View Mode
4
Full
Switch output Window to full screen mode
5
IR
IR Sensor for receiving the IR commands from
the IR Remote Control.
6
OSD
Buttons to navigate and manage the internal
menus of the product.
5.2 Rear Panel
No.
Name
Description
7
Power
Switch
Power On/Off Switch.
8
Power
Jack
Use included DC adaptor to power the product.
9
IR Ext.
This port is for a local IR sensor, used to extend
the IR signal. Connect to an IR Sensor.
10
HDMI
Input
Connect HDMI input sources 1 to 4.
11
Stereo
Output
Stereo Audio Output extraction (L/R).
12
HDMI
Output
Output for HDMI displays 1 and 2.
13
RS232
RS232 Serial Port for remote control.
14
Ethernet
Ethernet LAN Port, for remote control.
15
Service
For Firmware Upgrades.
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 7
6. Remote Control
Button
Function
POWER
Power on/off the device
LOCK
Lock/unlock the device
▲
Arrow button (up)
MENU
OSD (On Screen Display) menu
AUDIO
Select audio sources
Arrow button (right)
OK
Select the setting (similar to Enter)
Arrow button (left)
MUTE
Turn off the audio
BACK
Back to previous page of OSD menu
▼
Arrow button (down)
EXIT
Exit from the menus
F1
Reserved
720P
Switch output resolution to 720p @ 60Hz
1080P
Switch output resolution to 1080p @ 60Hz
4K2K
Switch output resolution to 4K @ 60Hz
QUAD
Fast switch to quad-view mode
FULL
Fast switch to full screen mode
Background
Set up the background picture of a window
LABEL
Window label ON/OFF
A
Select source A to be the input source
B
Select source B to be the input source
C
Select source C to be the input source
D
Select source D to be the input source
P1
User preset 1
P2
User preset 2
P3
User preset 3
P4
User preset 4
▲
▲
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 8
7. Operate and Connect
Software Control through RS-232 / Ethernet port
1. System Requirement
(1) OS information: MS Win XP/7/8/10
(2) Baud rates: 115200
(3) Free space taken on hard disk (software size): 10 MB
(4) Minimum RAM requirement: 256MB
2. Control interface
When clicking on the executable file, the following dialog will pop-up (under Microsoft Windows 7, please run
as administrator).
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct COM port and click
the OK button.
Ethernet Mode: Enter the IP address of the device and click the OK button.
After the software control method setting is selected, the system control interface will automatically start up.
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 9
Control Interface
1. Connection Status:
Shows the connect information and status. If the User uses RS-232 serial Mode to control the device, the
following graph is shown:
Else if the User uses Ethernet Mode to control the device, the following graph is shown:
In addition, if the User would like to change the control method, the User can click on the
or button to change modes.
2. Output Settings
In this section, the User can configure the inputs, the source of window A~D, output resolution, layout setting
(PAP or full screen) and switch mode.
(1) Source Selection
For each display window, you can assign arbitrary video sources here.
1
2
3
4
5
6
7
8
4x2 HDMI 2.0 Quad-View Processor Installation Guide
© Muxlab Inc. 2020 10
(2) Quick Selection
The system provides 5 default modes, 8 custom modes and 4 switching effects (Seamless, Fade in/out,
Dissolve, Wipe) for the User to select from.
(3) Output Resolution
Set the output resolution.
(4) Save Layout
The system provides 8 custom layouts, for Users to save frequently used scenarios.
Table of contents
Other MuxLab Computer Hardware manuals
Popular Computer Hardware manuals by other brands
EMC2
EMC2 VNX Series Hardware Information Guide
Panasonic
Panasonic DV0PM20105 Operation manual
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 user manual
Gigabyte
Gigabyte B660M DS3H AX DDR4 user manual
Raidon
Raidon iT2300 Quick installation guide
National Instruments
National Instruments PXI-8186 user manual
