MSNswitch UIS-322 User manual
1
Remote Power Management Solution for Crashed Network Devices
USER MANUAL
Version: 2203 (MNT.NBU.7322 or higher)
!
!
!
!
!
!
!
!
!
!
!
!
!
2
!"#$%&'(&)'*+%*+,&
)-".+%/&01&2*+/'345+6'*777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777 8!
1.1.##Introduction.................................................................................................................................................3#
1.2.#Hardware#Specification ................................................................................................................4#
1.3.##Network#Diagram......................................................................................................................................5#
1.4.##LED#Indicators#Explained ......................................................................................................................6#
)-".+%/&91&:"/3;"/%&<%+4. 777777777777777777777777777777777777777777777777777777777777777777777777777777777777 =!
)-".+%/&81&<'(+;"/%&>&?%#&<%+4.&@A'/&B3C"*5%3&D,%/E 77777777777777777777777777777777777777777 F!
3.1.##Introduction.................................................................................................................................................8#
3.2.##How#to#Locate#&#Access#IP#Switch#in#LAN ......................................................................................8#
3.2.1%%Locate%IP%Switch%in%LAN%using%Utility%program........................................................................ 9%
3.2.2%%Locate%IP%Switch%in%LAN%using%fixed%IP. ........................................................................................ 9%
3.3.##How#to#Access#IP#Switch#from#WAN#–#using#DDNS .................................................................11#
3.4.##How#to#Access#IP#Switch#from#WAN#-#using#Google#Talk/#Hangouts ..............................11#
3.4.1.%%How%to%Setup%Google%Talk/%Hangouts%for%the%IP%Switch ....................................................12%
3.5.#How#to#Access#IP#Switch#from#WAN#–#Using#Skype..................................................................14#
3.6.##How#to#Upgrade/#Re-Flash#Firmware...........................................................................................18#
)-".+%/&G1&2H&<;6+5-&?%#&D,%/&2*+%/("5% 77777777777777777777777777777777777777777777777777777777777777 9I!
4.1.##Information...............................................................................................................................................20#
4.2##Configuration ............................................................................................................................................21#
4.3##Log#Information .......................................................................................................................................34#
4.4##Help ...............................................................................................................................................................34#
)-".+%/&J1&!/'4#$%,-''+6*K&!6.,777777777777777777777777777777777777777777777777777777777777777777777777777 8=!
B..%*36L&B1&M'4+%/&)'*(6K4/"+6'*777777777777777777777777777777777777777777777777777777777777777777777777 GI!
B..%*36L&N1&2H&B33/%,,O&<4#*%+&"*3&P"+%;"Q 777777777777777777777777777777777777777777777777777777 G9!
B..%*36L&)1&P$',,"/Q 7777777777777777777777777777777777777777777777777777777777777777777777777777777777777777777 GG!
P''K$%&!"$R&9&<+%.&B4+-%*+65"+6'* 77777777777777777777777777777777777777777777777777777777777777777777777 GJ!
3
Chapter 1: Introduction
1.1. Introduction
IP Switch is designed to automatically power-cycle either one or both of its outlets
when either;
a) Internet connectivity is lost (resets Router/Modem to restart it), or
b) the network device being monitored is no longer responding in LAN.
It can also be used to:
a) remotely control outlets via instant messaging tool like Google Talk/ Hangouts, or
a Web User Interface.
b) perform scheduled power On / Off / Reset
c) manually control outlets by disabling the UIS (Uninterruptable Internet System)
function
IP Switch is useful where the Internet connection and accessibility to a remote site is
critical. It can be setup so that when the remote Mobile Broadband / Cable / Satellite
/ DSL / T1, etc. connection drops or if the remote router freezes-up, it will auto reset
the router to re-gain connectivity. IP Switch is also useful for:
1. Saving home users the trouble of constantly having to power-cycle their
router to re-gain Internet connectivity.
2. Resetting unresponsive device (for instance IP camera or NAS servers)
which otherwise will be inaccessible from remote.
3. IT Professionals who need to automatically or remotely reset devices
4. Preventing your connection from timing out or going dormant
5. Having devices on an automatic power schedule
Generalized description of network connection:
Hardware Specifications:
1. Built-in Web Server with 32-Bit RISC CPU.
2. 10/100Mbps Fast Ethernet Network Access.
3. Support IE or Java-Enabled Web Browser.
4
4. Network Protocol: HTTP, TCP/IP, UDP, SMTP, Dynamic DNS, DNS Client,
SNTP, DHCP.
5. Operating Temperature: 0°C ~ 60°C; Operating Humidity: 10% ~ 90%
6. For indoor use only.
1.2. Hardware Specification
Model No:
UIS-322
Socket type
2x of either;
a) Universal socket (Type X)
b) USA (Type B, NEMA 5-15R)
AUST / China (Type I, AS / NZS3112, CCC)
Certifications
CE, FCC (tested to be compliant with FCC 47 CFR Part 2 and Part
15 Class B equipment regulations)
Electrical Rating
Input: 125~250V~50/60Hz
Output: 10A (for 2 sockets) & DC5V, 500mA (for USB port)
Breaker
10A (Thermal fuse)
Available Sockets
2x fixed
Internet Control-able
2x fixed socket
Power ON / OFF switch
Individual outlet power ON / OFF LED button
(Press & hold 2 seconds)
Power Indicator
Orange LED
Reset to Factory Default
Reset button located to the right of Ethernet port
Internet Indicator
Green LED
Web Server CPU
32-Bit RISC CPU
Supported browser
IE and Java
Supported Network
Protocols
HTTP, TCP/IP, UDP, SMTP, Dynamic DNS, DNS Client, SNTP,
BOOTP, DHCP.
Network Access
10/100 Base-T, RJ45 (Cat. 5)
Operating Environment
0°C to 60°C at 10% to 90% relative humidity.
For indoor use only.
Package
White Box
5
1.3. Network Diagram
The following Network diagrams applies to all IP Switch models.
Fig.1 IP Switch setup to perform auto reset of router and modem
Fig.2 IP Switch setup to keep Internet device alive.
6
Fig.3 IP Switch setup for remote control via Google Talk/ Hangouts or thru Web User
Interface.
1.4. LED Indicators Explained
LED Status for Internet & Outlets
LED
LED status
Condition description
Internet
Solid Green
Internet connection available and UIS (Uninterruptable
Internet System) mode has been activated.
Internet
Blinking Green
There is internet connection. UIS mode button has not
been activated. With UIS enabled however, this means
that at least one of the target sites is not responsive
(regardless of being assigned or not)
Internet
OFF
There is no internet connection.
Outlet
Solid Orange
Outlet is powered ON
Outlet
OFF
Outlet is powered OFF
Fig.4 LED Indicator
LED Status on LAN Port
Light color
Condition description
Green
When On: Internet speed is at 100M
When flashing: Data transmitting / receiving
Yellow
On: Internet correspond speed is 10M
Flash: Data transmitting / receiving
7
Fig.5 LAN LED Indicators
Fig.6 Description
Chapter 2: Hardware Setup
IP Switch hardware installation procedure:
Step 1:
Connect the power cord to device and wall
outlet. The two orange LED will light up,
indicating that the individual Outlet is ON.
Press the Orange LED for 2 seconds to
turn the Outlet On / Off.
Step 2:
Connect the power plug to IP Switch
outlet.
NOTE: In order for IP Switch to
maintain continuous Internet
connection or reset your modem/
router, the router power input must
be connected here.
8
Step 3:
Connect LAN cable from your router.
Step 4:
Make sure the Internet LED light is
blinking to show that the internet
connection is ready.
Press and hold the “UIS On/Off” button
(about 2 seconds) to activate internet
protection, which will allow the switch to
auto reset upon loss of connection to the
Target sites (i.e web site addresses or
local IP addresses). This completes the
basic setup.
Chapter 3: Software & Web Setup (For Advanced User)
3.1. Introduction
IP Switch is designed to work without having to install any software (see hardware
setup above). However, for the advanced user, the unit can be customized and
configured for remote access. This gives the user further control over the power
ports.
There are two ways to remotely control the outlets (access from WAN);
a. Using DDNS and Port forwarding, see Section 3.3 or;
b. Using Google Talk/ Hangouts instant messaging tool, see Section 3.4.
3.2. How to Locate & Access IP Switch in LAN
IP Switch comes with a built-in Web User Interface (Web UI) that allows for more
advanced control over the unit. There are two ways of accessing the Web UI in LAN
(i.e. when both IP Switch and PC is connected to the same router).
1. Utility program (available for Windows only)
2. Use a fixed IP (when there’s no DHCP server).
*Note–You can also use any LAN program to locate the WebUI URL for example:
Mac: LANscan https://itunes.apple.com/us/app/lanscan/id472226235?mt=12
Windows: Wireshark or Angry IP Scanner
9
3.2.1 Locate IP Switch in LAN using Utility program.
Step 1:
Download the Utility program from
http://3gstore.com/ipswitchupdates and
install.
Once installed Utility will locate and list the
IP Switch units.
NOTE: Utility can only discover the IP
Switch units that are located within the
same LAN or network. Be aware that
certain things such as VPN, antivirus,
admin privileges, etc, can prevent
Utility from locating your device(s).
Utility will show LAN IP if units are
connected to a Router. If you are
connecting to your computer directly,
you will need to manually assign an IP
address to the device via the ‘Network’
tab, as well as manually set an IP for
your computer’s Ethernet adapter.
Step 2:
Click “Launch Web User Interface” to run
Internet Explorer (or your default browser)
and access the IP address of the unit.
A password dialog box will appear.
By default; Username/ password is:
admin/ admin. Press “OK” to proceed.
Step 3:
You will be logged into the IP Switch.
3.2.2 Locate IP Switch in LAN using fixed IP.
By default, the IP Switch should obtain an IP address automatically from your router
using DHCP. If for some reason it does not, press and hold the UIS button for 10
seconds and it will revert to a fixed LAN IP of 192.168.0.100.
To access IP Switch Web interface in this mode:
10
Step 1:
Connect the LAN cable from IP Switch to your PC’s Ethernet port
Step 2:
Assign a fixed IP within the same subnet to your PC. Example: IP address -
192.168.0.20; Subnet Mask - 255.255.255.0; Gateway: 192.168.0.1
Step 3:
On your PC, launch a web browser and enter the IP: 192.168.0.100 - Login
username/ password: admin/ admin. You can now change this fixed IP address
to one that you prefer by going to Configuration Settings -> Network.
Table of contents
Other MSNswitch Switch manuals
