Moxa Technologies V2201 User manual

P/N: 1802022010014

*1802022010014*

V2201 Series

Quick Installation Guide

Version 3.2, April 2022

Technical Support Contact Information

www.moxa.com/support

- 2 -

Overview

The Moxa V2201 Series ultra-compact x86 embedded computer is

based on the Intel® Atom™ E3800 Series processor, features the most

reliable I/O design to maximize connectivity, and supports dual wireless

modules, making it suitable for a diverse range of communication

applications. The computer’s thermal design ensures reliable system

operation in temperatures ranging from -40 to 85°C, and wireless

operation in temperatures ranging from -40 to 70°C with a special

purpose Moxa wireless module installed. The V2201 Series supports

Proactive Monitoring funct io n for device I/O status monitoring and

alerts, system temperature monitoring and alerts, and system power

management. Closely monitoring the system status makes it easier to

recover from errors and provides the most reliable platform for your

applications.

Package Checklist

Before installing the V2201, verify that the package contains the

following items:

•V2201 embedded computer

•Terminal block to power jack converter

•Wall mounting kit

•Quick installation guide (printed)

•Warranty card

NOTE: Please notify your sales representative if any of the

above items are missing or damaged.

V2201 Panel Layout

The following figures show the panel layouts of the V2201-W models;

for “non-W” models, the five antenna connectors will not be installed

during production.

Front Panel

- 3 -

Right Panel

Left Panel

LED Indicators

The following table describes the LED indicators located on the front

panel of the V2201.

LED Name

Status

Function

Power

Green

Power is on and computer is functioning normally.

Off

Power is off

User

Defined

Red

Event has occurred

Off

No alert

mSATA Yellow Blinking: Data is being transmitted

Off

Not connected / No data transmission

SD Card

Yellow

Blinking: Data is being transmitted

Off

Not connected / No data transmission

Wireless 1

Green

Steady On: Link is On

Blinking: Data is being transmitted

Off

Not connected

Wireless 2

Green

Steady On: Link is On

Blinking: Data is being transmitted

Off Not connected

- 4 -

LED Name

Status

Function

LAN 1

Yellow

Steady On: 1000 Mbps Ethernet link

Blinking: Data is being transmitted

Green Steady On: 100 Mbps Ethernet link

Blinking: Data is being transmitted

Off

10 Mbps Ethernet link or LAN is not connected

LAN 2

Yellow

Steady On: 1000 Mbps Ethernet link

Blinking: Data is being transmitted

Green

Steady On: 100 Mbps Ethernet link

Blinking: Data is being transmitted

Off

10 Mbps Ethernet link or LAN is not connected

Tx 1

Green

Blinking: Data is being transmitted

Off

Not connected

Tx 2

Green

Blinking: Data is being transmitted

Off

Not connected

Rx 1

Yellow

Blinking: Data is being transmitted

Off

Not connected

Rx 2

Yellow

Blinking: Data is being transmitted

Off

Not connected

NOTE

The Mini PCIe card’s LED behavior depends on the module

Installing the Wireless Modules

ATTENTION

The

“-W” models (e.g., V2201-E2-W-T) come with a heat sink

for the cellular card and five wireless SMA connectors installed.

The V2201 has two Mini PCIe sockets on the rear panel. One socket

only supports USB signals using the MC9090, MC7354, or MC7354

Mini PCIe cards. The other socket supports standard USB and PCIe

signals.

STEP1: Loosen the four screws

located at the middle of the rear

panel and open the cover.

STEP 2: Insert the wireless module

card at an angle.

STEP 3: Push the wireless module

card down and fasten it with the

two screws included with the

product.

The V2201 has the following two Mini PCIe sockets.

- 5 -

Socket 1: USB signal, for 3G/LTE

Mini PCIe card (Sierra Wireless

MC9090, MC7304, or MC7354).

NOTE: The cellular card heat

sink is installed in socket 1.

Socket 2: Standard USB + PCIe

signals, for Wi-Fi Mini PCIe card

(SparkLAN WPEA-252NI).

STEP 4: Connect the corresponding

wireless module cards to

connectors of the Mini PCIe

sockets.

The following five connectors are

available:

No. 1 & No. 3:

For the Wi-Fi Mini PCIe card

No. 2 & No. 4:

For the 3G/LTE Mini PCIe card

No. 5:

For the GPS module

STEP 5: Replace the rear cover.

You can also purchase and install external 3G, 4G, and Wi-Fi antennas

from Moxa. Contact a Moxa sales representative for information.

After installing the wireless modules and wireless external antennas,

the computer should appear as follows:

Installing the V2201

DIN-rail Mounting

The DK-DC50131 die-cast metal kit (shipped only with V2201-E4-W-T-

LX; purchase separately for all other models), enables easy and robust

installation of the V2201. Use the six M4*6L FMS screws included to

attach the DIN-rail mounting kit to the side panel of the V2201.

- 6 -

Installation:

STEP 1:

Insert the upper lip of the DIN rail into

the DIN-rail mounting kit.

STEP 2:

Press the V2201 towards the DIN rail

until it snaps into place.

Removal:

STEP 1:

Pull down the latch on the

mounting kit with a screwdriver.

STEP 2 & 3:

Use the screwdriver to pry the

V2201 slightly forward

away from

the DIN rail, and then lift the

V2201 upwards to remove it from

the DIN rail.

STEP 4:

Press the recessed button on the spring-

loaded bracket to lock it into position until

the next time you need to install the

V2201 on to a DIN rail.

Wall or Cabinet Mounting

The V2201 computers (with the exclusion of the V2201-E4-W-T-LX

model) come with two metal brackets for attaching to a wall or the

inside of a cabinet. Four screws (Phillips truss-headed M3*6L nickel

plated with Nylok®) are included in the kit.

Step 1:

Use two screws for each

bracket and attach the bracket

to the rear of the V2201.

- 7 -

Step 2:

Use two screws on each side to

attach the V2201 to a wall or

cabinet.

The product package does not

include the four screws required

for attaching the wall-

mounting

kit to the wall or cabinet; they

need to be purchased

separately. We r ecommend

using standard M3*5L screws.

ATTENTION

This equipment is intended to be used in Restricted Access

Locations, such as a computer room, with

access limited to

SERVICE PERSONAL or USERS who have

been instructed on

how to handle the metal

chassis of equipment that is so hot

that special protection may be needed before touching it. The

location should only be accessible with a key or through a

security identity system.

Connector Description

Power Connector

Connect the 9 to 36 VDC LPS or Class 2 power line to the V2201’s

terminal block. If the power is supplied properly, the Power LED will

light up. The OS is ready when the Ready LED glows a solid green.

ATTENTION

The power cord of

the adapter should be connected to a socket

outlet with earthing connection.

ATTENTION

This product is intended to be supplied by a Listed Power

Adapter or DC power source, output rated 9 to 36 VDC, 3.5 to 1

A minimum, Tma = 85 degree C minimum.

Grounding the V2201

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from

the grounding screw (M4) to the grounding surface prior to connecting

the power.

- 8 -

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface, such as a metal panel.

SG: The Shielded Ground (sometimes called

Protected Ground)

contact is the right most

one

on the

3-pin power terminal block connector

when viewed from the angle shown here.

Connect the SG wire to an appropriate

grounded metal surface.

HDMI Outputs

The V2201 comes with a type A HDMI female connector on the front

panel to connect an HDMI monitor.

The screw hole above the HDMI connector is used to attach a custom

lock to the HDMI connector; a custom lock is needed since the shape of

different HDMI connectors are not the same. Please contact a Moxa

sales representative for details.

Before Attaching the Lock

After Attaching the Lock

- 9 -

Ethernet Ports

The 10/100/1000 Mbps Ethernet ports use RJ45 connectors.

10/100 Mbps

1000 Mbps

ETx+

TRD(0)+

ETx-

TRD(0)-

ERx+

TRD(1)+

–

TRD(2)+

–

TRD(2)-

ERx-

TRD(1)-

–

TRD(3)+

–

TRD(3)-

Serial Ports

The serial ports use DB9 connectors. Each port can be configured by

software for RS-232, RS-422, or RS-485. The pin assignments for the

ports are shown in the following table:

Pin RS-232 RS-422

RS-485

(4-wire)

RS-485

(2-wire)

DCD

TxDA(-)

–

RxD

TxDB(+)

–

TxD

RxDB(+)

DataB(+)

DTR

RxDA(-)

DataA(-)

GND

DSR

–

RTS

–

CTS

–

SD Slot

The V2201 has an SD slot for storage expansion. The SD slot allows

users to plug in an SD 3.0 standard SD card. To install an SD card,

gently remove the outer cover from the left, and then insert the SD

card into the slot.

USIM Slot

The V2201 has a USIM slot for 3G/LTE wireless Internet connections.

To install a USIM card, gently remove the outer cover from the left, and

then insert the USIM card into the slot.

USB Hosts

The V2201 has 1 USB 3.0 and 2 USB 2.0 Type-A connectors. 2 USB 2.0

ports are located on the front panel, and 1 USB 3.0 port is on the right

panel. The port supports keyboard and mouse and can also be used to

connect a Flash drive for storing additional data.

Audio Interface

The audio output of the V2201 is combined with the HDMI connector.

- 10 -

DI/DO

The V2201 comes with four digital inputs and

four digital outputs on a 2 x 5 terminal block.

Reset Button

Press the “Reset Button” on the left side panel of the V2201 to reboot

the system automatically.

Real-time Clock

The V2201’s real-time clock is powered by a lithium battery. We

strongly recommend that you do not replace the lithium battery without

help from a qualified Moxa support engineer. If you need to change the

battery, contact the Moxa RMA service team.

ATTENTION

There is a risk of explosion if the battery is replaced by an

incorrect type of battery.

Powering on the V2201

To power on the V2201, connect the “terminal block to power jack

converter” to the V2201’s DC terminal block (located on the side

panel), and then connect the 9 to 36 VDC power adapter. The computer

is automatically switched on once the power adapter is plugged in. If it

does not, press the Power Button to turn on the computer. Note that

the Shielded Ground wire should be connected to the top pin of the

terminal block. It takes about 30 seconds for the system to boot up.

Once the system is ready, the Power LED will light up.

Connecting the V2201 to a PC

Power on the V2201 computer after connecting a monitor, keyboard,

and mouse, and verifying that the power source is ready. Once the

operating system boots up, the first step is to configure the Ethernet

interface. The factory default settings for the V2201’s LANs are show

below (W7E uses DHCP).

Default IP Address

Netmask

LAN 1

192.168.3.127

255.255.255.0

LAN 2

192.168.4.127

255.255.255.0

Other manuals for V2201

Table of contents

Other Moxa Technologies Industrial PC manuals

Moxa Technologies

Moxa Technologies TC-6110-W7E User manual

Moxa Technologies

Moxa Technologies UC-5100 Series User manual

Moxa Technologies

Moxa Technologies UC-8100 Series Instructions for use

Moxa Technologies

Moxa Technologies V481-XPE User manual

Moxa Technologies

Moxa Technologies IA3341 User manual

Moxa Technologies

Moxa Technologies UC-8200 Series Instructions for use

Moxa Technologies

Moxa Technologies V460 Series User manual

Moxa Technologies

Moxa Technologies DRP-C100 Series Instructions for use

Moxa Technologies

Moxa Technologies IA260 series User manual

Moxa Technologies

Moxa Technologies V481-XPE User manual

Moxa Technologies

Moxa Technologies UC-7400-LX Plus User manual

Moxa Technologies

Moxa Technologies UC-3100 Series User manual

Moxa Technologies

Moxa Technologies TC-6110 Series User manual

Moxa Technologies

Moxa Technologies MC-7400 Series User manual

Moxa Technologies

Moxa Technologies IA260 series User manual

Moxa Technologies

Moxa Technologies THINKCORE W345 User manual

Moxa Technologies

Moxa Technologies V2406-24I Series Instructions for use

Moxa Technologies

Moxa Technologies UC-8100A-ME-T User manual

Moxa Technologies

Moxa Technologies AIG-300 Series User manual

Moxa Technologies

Moxa Technologies TC-6110-W7E User manual

Moxa Technologies

Moxa Technologies IA240 Instructions for use

Moxa Technologies

Moxa Technologies V2406 User manual

Moxa Technologies

Moxa Technologies DA-662A-8 Instructions for use

Moxa Technologies

Moxa Technologies UC-8112-LX STK User manual

Popular Industrial PC manuals by other brands

Chipsee

Chipsee PPC-A72-101 manual

Advantech

Advantech UNO-2184G user manual

MSI

MSI MS-9A76 manual

Stackrack

Stackrack THOR200 user manual

Nodka

Nodka eBOX-3000-ETC user manual

Siemens

Siemens SIMATIC IPC627E Quick install guide

MSI

MSI MS-9A89 user manual

Artila

Artila Matrix-516 user guide

Siemens

Siemens SIMATIC Rack PC 840 V2 Getting started

Advantech

Advantech IPPC-6152A user manual

Beckhoff

Beckhoff CX9020 manual

Dell

Dell Embedded Box PC 5000 Installation and operation manual

IBASE Technology

IBASE Technology ASB200-918 Series user manual

Lenovo

Lenovo ThinkCentre M90q Hardware Maintenance Manual

IXXAT

IXXAT Econ 100 Hardware manual

Kontron

Kontron KBox A-151-TGL user guide

AXIOMTEK

AXIOMTEK ICO500-518 Series user manual

JLT

JLT 1214N user manual