Movon MDAS-9 User manual
MDAS-9 Installation Guidebook
3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
- 2 -
CONTENTS
1General ..........................................................................................................................6
2Product .......................................................................................................................... 7
2.1 Specification........................................................................................................................ 7
2.2 Product components ........................................................................................................ 8
2.3 Main Unit & Main Cable...................................................................................................9
2.3.1 Main Unit..................................................................................................................... 9
2.3.1.1 Parts description................................................................................................9
2.3.1.2 Mounting Frame and Back Cover...................................................................9
2.3.1.3 LED Description................................................................................................10
2.3.2 Main Cable ................................................................................................................10
2.4 Contactless CAN Reader.................................................................................................10
2.5 Indicator.............................................................................................................................11
2.6 Peripheral Component Interconnect Box (PCI Box) .................................................11
2.7 External Fuse (Optional).................................................................................................12
2.8 Technical Cleaning Wipe (Optional) ............................................................................12
2.9 Vibration unit (Optional)................................................................................................13
2.10 GPS (Optional)..................................................................................................................13
2.11 Video Out Cable (Optional) ...........................................................................................13
2.12 FMS Cable (Optional)......................................................................................................14
2.13 FMS Converter (Optional)..............................................................................................14
Convert ADAS event data received from RS-232 to CAN-Bus data to transmit. ................14
2.14 Micro SD Card (Consumable)........................................................................................15
2.15 Wi-Fi Dongle (Optional for calibration).......................................................................15
2.16 Micro 5 pin USB Cable (Optional for Calibration).....................................................16
3Installation...................................................................................................................17
3.1 System Connection Scheme..........................................................................................17
3.2 Installation Procedure ....................................................................................................17
3.3 Wiring Combination and Description..........................................................................18
- 3 -
3.3.1 Main Cable ................................................................................................................18
3.3.2 5Pin Analog Cable....................................................................................................18
3.3.3 4Pin CAN Cable.........................................................................................................19
3.3.4 3Pin Power Cable.....................................................................................................19
3.3.5 Contactless CAN Reader.........................................................................................19
3.3.6 Wiring Combination................................................................................................21
3.4 Attach MDAS-9.................................................................................................................22
3.5 Parts connection..............................................................................................................25
3.5.1 Indicator ....................................................................................................................25
3.5.2 Vibration module.....................................................................................................25
3.5.3 FMS Cable..................................................................................................................26
3.5.4 FMS Converter .........................................................................................................26
3.5.5 Video-Out Cable.......................................................................................................27
3.6 Connect Rear Camera to MDAS-9................................................................................28
3.7 Reset MDAS-9...................................................................................................................29
4PC and Android Phone Calibration ..............................................................................32
4.1 Driver Setup (ONLY SUPPORTS WINDOWS OS).........................................................32
4.2 Calibration Setup .............................................................................................................32
4.2.1 Access MDAS-9 Calibration page via PC .............................................................32
4.2.2 Select Vehicle Signal Types....................................................................................33
You have 3 wiring options for installation; CAN-BUS / Analog wiring / GPS...............33
4.2.2.1 Vehicle Data File (CAN-BUS)..........................................................................33
4.2.2.2 Analog (GPIO)...................................................................................................33
4.2.2.3 GPS......................................................................................................................34
4.2.3 Vehicle Signal Check................................................................................................34
4.2.3.1 Verify Speed Signal..........................................................................................34
4.2.3.2 Verify Turn Signal.............................................................................................35
4.2.4 Camera Location and Vehicle Measurement ....................................................35
4.2.5 Camera Angle ...........................................................................................................37
4.2.5.1 Fine Camera Angle ..........................................................................................37
- 4 -
4.2.6 Hood Line ..................................................................................................................38
4.2.7 Rear Camera Setup..................................................................................................38
4.2.8 Lane Departure Warning (LDW) Sensitivity .......................................................39
4.2.9 Forward Collision Warning (FCW) Sensitivity....................................................39
4.2.10 Safety distance alert setup....................................................................................40
4.2.11 Pedestrian collision warning setup......................................................................40
4.2.12 Advanced ADAS setup ............................................................................................41
4.2.13 DVR (Dashcam) setup .............................................................................................41
4.2.14 Fleet management setup.......................................................................................42
4.2.15 Miscellaneous Settings...........................................................................................42
4.2.16 MDAS Setup Complete...........................................................................................43
4.3Setting Modification........................................................................................................44
4.3.1 Menu Description....................................................................................................44
4.3.2 Update Firmware.....................................................................................................45
4.3.3 Default MDAS Settings ...........................................................................................45
4.3.4 Re-calibration ...........................................................................................................46
4.3.5 Change settings from warning setups.................................................................46
5How to Download CAN Data........................................................................................47
5.1 Register in Vehicle Database.........................................................................................47
5.2 Download CAN Data file.................................................................................................47
6Recognize MDAS-9 in computer ..................................................................................49
6.1 Computer with Windows XP, 7, 8, 8.1 ........................................................................49
6.2 Computer with Windows 10 .........................................................................................49
- 5 -
No
Version
Date
Contents
Written
Note
1
2.1.5
17.08.05
Initial Release
John
2
2.1.6
17.08.08
Modified a picture (Power Cable, Smart
phone Calibration, PC Calibration)
John
3
2.1.7
17.08.09
Added FMS cable
John
4
2.1.8
17.08.10
Added Recording Hours
John
5
2.1.9
17.08.17
Modified product components
John
6
2.2.0
17.09.14
Modified product accessory
Hugh
7
2.2.3
17.11.08
Modified description of CAN Reader
John
8
2.2.4
17.11.21
Modified 3Pin Power cable
John
9
2.2.5
17.11.29
Added product accessory (FMS Converter)
John
10
2.2.6
17.11.30
Modified description of CAN Reader
John
11
2.2.7
17.12.01
Modified description of SD card
John
12
2.2.8
18.01.16
Modified System Connection Scheme
John
13
2.2.9
18.03.20
Modified Driver setup and vibration picture
Hugh
14
2.2.10
18.04.25
General update
Julia
15
2.2.11
18.09.21
Added analog wiring method comment
Hugh
16
2.2.12
19.01.03
Remove App setting sections
Improve the images and corrected
expression
Dominic
- 6 -
1General
This MDAS installation requires custom wiring to various electronic signals in the
vehicle. Please contact your local authorized installer to install. NAV-TV and Movon will
hold no liability of any damage occurred during installation proceeded by users or
unauthorized installers.
MDAS is developed to give only warnings to drivers. The final decision to maneuver or
control shall be made by drivers themselves. Furthermore, MDAS is not capable to
provide 100% detection rate of lane markings, vehicles, and MDAS recognition
performance can be fluctuated due to road conditions, inclement weather, poor
installation, etc. Please ensure that keep eyes forward while driving rather than only
relying on MDAS.
- 7 -
2Product
2.1 Specification
CPU
Cortex A7 Quad-Core
Audio Out
Speaker
Camera
Front
1280 x 720 (HD)
Rear
1280 x 720 (HD)
Power
Input Range
DC 10V ~ 36V
Power
Consumption
400mA @ 12V Max
3mA @ 12V Idle State
Format
Video
MP4 (h.264 codec)
Audio
PCM
Storage
4~128GB Micro SD card support
Input / Output
Main
Micro 5pin USB port, Micro SD Card,
GPS port
PCI Box
Main Cable, Vibrator, Analog, Indicator, FMS,
Video OUT, CAN, POWER, Fuse
Size
Body
80 x 120 x 50 mm
Temperature
Operation
-20℃~ 70℃(-4℉~ 158℉)
Storage
-40℃~ 85℃(-40℉~ 185℉)
- 8 -
2.2 Product components
Main unit
Basic cables
(Power/CAN/Analog)
PCI Box
Indicator
Micro SD card
(Consumable)
Rear Camera
(Optional)
Contactless CAN
Reader
(Optional)
Video Out Cable
(Optional)
GPS
(Optional)
Vibrator
(Optional)
Micro 5PIN USB
cable
(Optional for
installers)
Wi-Fi Dongle
(Optional for
installers)
External Fuse
(Optional)
Technical cleaning
wipe
FMS Cable(RS-232)
(Optional)
FMS Cable with D-
Sub(RS-232)
(Optional)
FMS Converter
(RS-232 to CAN)
(Optional)
- 9 -
2.3 Main Unit & Main Cable
2.3.1 Main Unit
2.3.1.1 Parts description
2.3.1.2 Mounting Frame and Back Cover
- 10 -
2.3.1.3 LED Description
2.3.2 Main Cable
2.4 Contactless CAN Reader
LED Status
Illuminate
Blink
Illuminate
Blink
Blink
Booting
Turn signal
(L, R)
Before
booting
Working
mode
Initialization
Calibration
Mode
Firmware
Update
Other manuals for MDAS-9
3
Table of contents
Other Movon Dashcam manuals
