You may either connect your computer to the router using an Ethernet cable if they are
sufciently close to each other or by means of a wireless network. Furthermore, you
can simultaneously have certain items of equipment connected to the router using the
Ethernet cable and others as portable through the wireless network.
You can use the wireless network as long
as your computer is equipped with a wire-
less adapter installed or this is integrated
into your equipment.
The rst step will be to enable the wire-
less network for your router. This is done
by pressing the button located at the
back of the router for one (1) second. The
WLAN indicator will light up in green and
will blink when navigating.
The conguration parameters by default
for your wireless network are shown on
the label at the bottom of your router.
The next step is to congure the com-
puters on your wireless network in
accordance with your router’s wireless
parameters.
A. Connection using wireless
network
5. Connecting the computer to the router. Two options are available
Start using your ADSL…
For further information please refer to section 3.5 of the user’s manual on the Advanced Settings CD.
