Mountz MSP series User manual
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 1
MSP Screw Presenters
Operating Instructions
Rev 2.1(5/2/2019)
Read the operation manual carefully before using the machine.
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 2
CONTENTS
1. Features-----------------------------------------------------------------------------------3
2. Parameters-------------------------------------------------------------------------------3
3. Ussage & Adjustment -----------------------------------------------------------------4
4. Description of parts and functions---------------------------------------------------8
5. Part list------------------------------------------------------------------------------------12
6.Trouble Shooting-------------------------------------------------------------------------15
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 3
Features
1. Adjustable Screw Size Capacity
Fully adjustable models, as the screw presenters can be adjusted to match
different screw sizes.
2. Operates Smoothly
Screws are placed into the hopper of the screw presenter and automatically lined
up for dispensing.
3. Adjustable Speed
Control the deeding system and drive system independently. Adjust the screw feed
speed.
4. Simple Operation
This simple mechanism allows trouble-free operation, eliminating jammed or
stuck screws.
5. Increase Productivity Significantly
Screw presenters are small, tabletop devices used to organize and automate work areas
and production cells. Screw presenters make assemblers and the assembly process more
efficient by mechanically presenting a screw to a fixed pick up point. Conventional
assembly methods cause assemblers to inefficiently fumble with screws that are stored in
bins or shaker trays. The enhancement of productivity is estimated to improve assembly
time by nearly fifty percent.
Parameters
Screw head: Suits each tape of screws (L max=19mm)
Output speed: 2 screws / s
Input voltage: DC15v /1200mA
Accessories: Screw stopper plate , 1 pieces; DC Adapter , 1 piece; 2 kinds of
adjustment sheet, 4 piece 1.2mm, 5 piece 0.2mm; Hexagonal key, 1 piece
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 4
BEFORE USE
Read these instructions thoroughly for the proper use of this machine. Keep
the manual in a safe place so that you or the operator can refer to it whenever
necessary.
1. Accessories Included:
* Screw stopper plate , 1 pcs (1pcs is already attached to the main
body)
* DC Adapter , 1 pcs
* 2 metal adjustment laminates, 4 pcs 1.2mm, 5 pcs 0.2mm (used to
adjust the holding plate)
* Hexagonal key, 1 pcs
2. For safe use
Operate the screw presenter properly in order to prevent injuries and
damage
Installation
Install the screw presenter on a level, stable location that can endure it's
weight and operating conditions. If the machine falls down or turns over due
to improper installation, Injuries or property damage may result.
Operating
Environment
Caution: Do not operate this machine where flammable or corrosive gas is
present. It is extremely dangerous to use this machine under such
circumstances. Do not operate this machine in environments of high
humidity.
AC adapter
Caution: Do not use any other AC adapter other than the recommended
accessory.
Rail
Caution: Do not damage nor oil the rail.
Suitability of screws
Caution: Do not use oily screws, dirty screws or any screw other than those
prescribed.
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 5
Screw removal
Caution: Do not use excessive or unwarranted force when removing
screws.
When machine is not in use
Caution: Be sure to unplug the AC adapter from the wall outlet when
not in use for extended hours.
Emergency
Caution: Stop operation and unplug immediately whenever you sense
abnormalities or anomalies during the operation of this machine. Turn off
the power switch and disconnect the AC adapter from the receptacle.
Continued operation may cause fire, electric shock, malfunction or
injury.
Servicing
Caution: Do not attempt to repair, disassemble or modify this machine except
where specified by this manual. Consult Mountz, Inc. for service and repair of
this machine.
Rail removal from main body
1) Loosen upper screw to
open rail access window.
2) Loosen side screw to open
side rail access window.
3) Loosen screw pick up fixture and
remove rail.
Adjust rail widht by loosening the
screws indicated on the picture.
1)
3)
2)
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 6
Try one screw and make sure it runs smothly thruout the rail. Than re tight all
screws on the rail.
Quantity of screws thrown in
If too many screws are thrown in, orientation and transfer of the screw might be
affected.
Check/adjustment of the brush
Check the height of the brush.
*As in the picture above, set the brush to an approximately level position.
*Make sure the edge of the brush tauches the screw's head.
*If the height of the brush is either too low or too high, orientation and transfer of the screws
might get jammed or it won't feed any screws.
*If adjustment is necessary, adjust it by loosening the brush height adjusting screw.
Note: Always unplug the AC adapter from the wall outlet before making any adjustments to
avoid injury.
Loosen screws as indicated. Use the metal laminates provided as
accessories to increase width on the rail.
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 7
Speed adjustment
(1)Characteristics of motor speed:
The connection between motor speed and vibration speed.
To adjust screw feeding speed.
(For quicker rail fill up). To adjust vibration. Quicker
screw alignment.
Rail filling timer. How many
screws left on the rail before
it starts vibrating agian.
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 8
Description of parts and functions
Basic Frame
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 9
Guide Part
Screw rail
Mountz Inc. 1080 North 11th Street, San Jose, CA 95112 Phone: (408) 292-2214 Fax: (408) 292-2733
www.mountztorque.com Page 10
Vibrating Part
Internal structure
(3)
Other manuals for MSP series
1
This manual suits for next models
2
Table of contents
Other Mountz Digital Presenter manuals
Popular Digital Presenter manuals by other brands
Samsung
Samsung SDP-850 user manual
Dukane
Dukane DV-P303A Specifications
RemotePoint
RemotePoint Presenter Global user manual
Kensington
Kensington Wireless Presenter with Laser Pointer Operating instruction guide
NEC
NEC DS1-MP10RX2 Important information
Logitech
Logitech R800 - Professional Presenter Presentation Remote... quick start guide