Motorola BSR 64000 User manual

BSR 64000 Quick Start

Guide

Notice

Motorola, Inc.

No part of this publication my be reproduced in any form or by any means or used to make and any derivative work

(such as translation, transformation or adaptation) without written permission from Motorola, Inc.

Motorola reserves the right to revise this publication and to make changes in content from time to time without

obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide

without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of

mechantability and fitness for a particular purpose. Motorola may make improvements or changes in the product(s)

described in this manual at any time.

Motorola,the stylized M logo, and Intelligence Everywhere are registered tradmarks of Motorola, Inc. Broadband

Services Router, BSR, BSR 64000, RiverDelta, SmartFlow are trademarks of RiverDelta Networks, Inc. All other

trademarks and registered trademarks are the property of their respective owners.

503406-001

TPD-0040-01 Rev A

Published:October, 2002

iii

Contents

Preface

Scope v

Audience v

Documentation Set v

Conventions vi

Notes, Cautions, Warnings vii

Contacting Support viii

Quick Start

Introduction 1

Configuring the Servers 2

Physically Install the BSR 3

Accessing the CLI to Set System Passwords 4

Setting System Passwords 5

Specifying System Time Information 7

Configure SNMP 9

Configure the Ethernet IP Address 9

Configure Cable IP Address 10

Configure the POS Module 11

Configure Routing 12

Routing Policy 12

BSR 64000 Quick Start Guide

Configure RIP v1 or RIP v2 on an Interface 12

Configure OSPF on an Interface 13

Configure BGP on an Interface 14

Configure the CMTS 15

Configure the Downstream Port 17

Configure the Upstream Ports 18

Save the Configuration 19

Preface

Scope

This document describes the basic tasks used to get the Motorola™ Broadband

Services Router™ 64000 (BSR 64000™) out of the box, running, connected to the

network and operational.

Audience

This document is for use by those persons who will install and configure the

BSR 64000™ product. Only trained service personnel should install, maintain, or

replace the BSR 64000.

Documentation Set

The following documents comprise the BSR 64000 documentation set:

•BSR 64000 Command Reference Guide

This document contains the Command Line Interface (CLI) commands for

managing, configuring, and maintaining the BSR 64000.

•BSR 64000 Configuration and Management Guide

This document provides the instructions and procedures for configuring and

managing the BSR 64000.

•BSR 64000 Installation Guide

This document describes how to install the BSR 64000 product.

BSR 64000 Quick Start Guide

•BSR 64000 Release Notes

These documents provide information about features not described or incorrectly

documented in the main documentation set; known problems and anomalies;

product limitations; and problem resolutions.

•BSR 64000 SNMP MIB Reference Guide

This document describes the Simple Network Management Protocol (SNMP)

MIBs; provides information that describes standard and proprietary MIB support;

describes how to walk the MIBs and how to compile and load the SNMP MIBs. It

also provides task examples.

•BSR Troubleshooting Guide

This document provides instructions and procedures for troubleshooting the BSR

product.

•BSR 64000 Quick Start Guide

This document provides basic tasks used to get the BSR 64000™ out of the box,

running, connected to the network, and operational.

Conventions

This document uses the conventions in the following table:

Convention Example Explanation

angle brackets < > ping <ip-address>

ping 54.89.145.71 Arguments in italic and enclosed by angle

brackets must be replaced by the text the

argument represents. In the example,

54.89.345.71 replaces <ip-address>. When

entering the argument, do not type the angle

brackets.

bar brackets [ ] disable [level] Bar brackets enclose optional arguments. The

example indicates you can use the disable

command with or without specifying a level.

Some commands accept more than one

optional argument. When entering the

argument, do not type the bar brackets.

Preface

vii

Notes, Cautions, Warnings

The following icons and associated text may appear in this document.

bold text cable relay-agent-option Boldface text must be typed exactly as it

appears.

brace brackets {} page {on |off} Brace brackets enclose required text. The

example indicates you must enter either on or

off after page. The system accepts the

command with only one of the parameters.

When entering the text, do not type the brace

brackets.

italic text boot system <filename> Italic type indicates variables for which you

supply values in command syntax descriptions.

It also indicates file names, directory names,

document titles, or emphasized text.

screen display Wed May 6 17:01:03

2000 This font indicates system output.

vertical bar | page {on |off} A vertical bar separates the choices when a

parameter is required. The example indicates

you can enter either command:

page on or page off

When entering the parameter, do not type the

vertical bar or the brace brackets.

Note: A note contains tips, suggestions, and other helpful information, such

as references to material not contained in the document, that can help you

complete a task or understand the subject matter.

Caution: The exclamation point, within an equilateral triangle, is intended to

alert the user to the presence of important installation, servicing, and

operating instructions in the documents accompanying the equipment.

Convention Example Explanation

BSR 64000 Quick Start Guide

viii

Contacting Support

Use the following information to contact Support:

Warning: This symbol indicates that dagerous voltages levels are present

within the equipment. These voltages are not insulated and may be of

sufficient strength to cause serious bodily injury when touched. The symbol

may also appear on schematics.

U.S. 1-888-944-HELP

1-888-944-4357

International +.215-323-0044

WWW http://www.gi.com/BUSAREA/CUSACC/websupport.html

Email cmtssupport@motorola.com

Quick Start

Other manuals for BSR 64000

Table of contents

Other Motorola Network Router manuals

Motorola

Motorola VL-RISC MCF5202 User manual

Motorola

Motorola PTP 300 Series User manual

Motorola

Motorola HOTZONE DUO 1.0 User manual

Motorola

Motorola RFS6000 - Wireless RF Switch User manual

Motorola

Motorola WE800G - Wireless EN Bridge User manual

Motorola

Motorola Netopia 2247NWG User manual

Motorola

Motorola Wireless Broadband Platform User manual

Motorola

Motorola 110502USM001 - Vanguard 60 Router User manual

Motorola

Motorola MotoWI4 PTP 600 Series Instruction Manual

Motorola

Motorola Netopia 3397GP User manual

Motorola

Motorola PTP 300 Series User manual

Motorola

Motorola MT7711 User manual

Motorola

Motorola MH7021 User manual

Motorola

Motorola WR850GP - Wireless Broadband Router User manual

Motorola

Motorola WR850 User manual

Motorola

Motorola POWERBROADBAND 45101 User manual

Motorola

Motorola EX-3524 User manual

Motorola

Motorola MG7315 User manual

Motorola

Motorola MG8702 User manual

Motorola

Motorola 68390 - Vanguard 320 Router User manual

Motorola

Motorola PTP 48600 User manual

Motorola

Motorola PMP 320 Instruction Manual

Motorola

Motorola 68384 - Vanguard 320 Router User manual

Motorola

Motorola MR1700 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview

LevelOne

LevelOne FBR-1416 user manual