Motorola ES400 User manual
ES400
Quick Start Guide
2
©2010 MOTOROLA, INC. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability, function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the application or use
of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or
patent, covering or relating to any combination, system, apparatus, machine, material, method, or
process in which Motorola products might be used. An implied license exists only for equipment, circuits,
and subsystems contained in Motorola products.
MOTOROLA, the Stylized M Logo and Symbol and the Symbol logo are registered trademarks of
Motorola, Inc. Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged.
Motorola, Inc.
One Motorola Plaza
Holtsville, N.Y. 11742-1300
http://www.motorola.com/enterprisemobility
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty.
3
Power Button
Receiver
Touch Screen
Volume Buttons
Scan Button
Programmable
Button
Headset
Port
microUSB
Port
Camera Button
LED Indicator
Illumination
Light
Camera Lens
Charging/Communication
Contacts
Ambient Light/Proximity Sensor
Finger Print Reader
Battery Cover
LED Aimer
ES
400
PrimaryMicrophone
(Handset Mode)
Secondary
Microphone
(Speakerphone Mode)
Speaker
Speaker
Optical Nav Pad
Keypad
Stylus
4
Features
The ES400 offers the following features:
Motorola Home Screen
The Motorola Home Screen provides faster and
easier access to features and applications and
allows users to tailor the interface to improve their
unique workflow and maximize efficiencies.
Fingerprint Reader
The ES400 provides a biometric sensor to un-lock
the device and ensure only authorized access to
the device and network.
Bluetooth
The ES400 supports Bluetooth communication
with headsets, printer, etc.
Wi-Fi
The ES400 has a built-in 802.11 a/b/g radio for
connecting to wireless networks.
Accelerometer
The ES400 responds to movement using a built-in
accelerometer. When you rotate the ES400 from
portrait to landscape, the accelerometer detects
the change and rotates the display accordingly.
Holster Switch
The ES400 automatically senses when it is placed
in the optional soft holster and goes into suspend
mode to extend battery life.
Keypads
The ES400 offers three keypad configurations,
QWERTY, QWERTZ and AZERTY, to support
global enterprise deployments.
Dual WAN
The ES400 provides user-selectable dual 3.5G
broadband WAN radio (GSM HSPA and
CDMA-EVDO Rev A).
5
Getting Started for the First Time
The activation process is dependent upon your
carrier. If you are using a GSM carrier, you must
install a SIM card prior to installing the battery.
To get started:
• Remove the battery cover.
• Install an microSD card (optional)
• Install a SIM card (GSM Only)
• Install the battery.
Remove the Battery Cover
To remove the battery cover:
1. Hold the ES400 firmly in two hands as shown.
2. With thumbs, push battery cover toward the
bottom of the ES400.
3. Lift the battery cover off the ES400.
1
2
6
Install a microSD Card (Optional)
1. Slide the SIM card holder up to unlock.
2. Lift the SIM card holder.
3. Slide the microSD card holder to the right to
unlock.
4. Lift the microSD card holder.
5. Insert the microSD card into the holder as
shown.
6. Close the microSD card holder.
7. Slide the microSD card holder to the left to lock.
Install a SIM Card (GSM Only)
1. Slide the SIM card into SIM card holder as
shown.
7
2. Close the SIM card holder.
3. Ensure that the SIM card is fully seated and
flat.
4. Slide the SIM card holder toward the bottom of
the device to lock.
Install the Battery
1. Remove the battery from the packaging.
2. Locate the battery contacts.
3. Insert the battery into the battery well with the
contacts facing down and to the right.
4. Press the top of battery into place.
5. Slide the battery lock latch down to secure the
battery.
6. Replace the battery cover.
NOTE The ES400 will not turn on with the
battery cover removed.
1540 mAh Battery Shown
Battery Lock Latch
8
Charge the Battery
To charge the battery:
1. Select the appropriate
clip plug for your
country.
2. Slide the clip plug into
the power supply until
it locks into place.
3. Plug the included
Rapid Charge USB cable into the rectangular
slot in the power supply.
4. Plug the power supply into AC wall outlet.
5. Lift rubber flap on the side of the ES400.
6. Plug the micro-USB connector into the USB
port.
7. The LED indicator blinks green indicating that
the battery is charging. When the battery is fully
charged the LED indicator becomes solid
green.
Rapid Charge USB
Cable
Power Supply
9
Carrier Activation
GSM/UMTS Activation
Upon start up, the ES400 looks for an installed
SIM card.
If a SIM card from a supported carrier is installed,
the ES400 detects the installed SIM card and
activates on the GSM/UMTS network and
configures the data connections.
If a SIM card from an unsupported carrier is
installed, the ES400 detects the installed SIM card
and activates on the GSM/UMTS network, but the
data connection and MMS connection information
must be manually configured.
Refer to the ES400 User Guide for more
information.
CDMA Activation
To activate the ES400 on a CDMA network:
1. Tap Start > Settings > Connections > Phone
Network Setup.
2. On the Band tab, select CDMA Only from the
Network type option.
3. On the CDMA Setup tab, select a carrier from
the preferred network option.
4. Tap the Start Activation button.
5. Tap Yes to activate.
6. For a new account, call the carrier from an
existing phone to request over-the-air
activation.
7. Press Activate Now button.
10
Keypad
Use the orange fn key to access the secondary
layer of characters and actions (shown on the
keypad in orange). Press the Orange fn key once
to activate this mode temporarily, followed by
another key. This displays the icon at the
bottom of the screen, until a second key is
pressed. Press the Orange fn key twice to lock
this mode. This displays the icon at the bottom
of the screen. Press the Orange fn key a third time
to unlock.
The Shift key changes the state of the alpha
characters from lowercase to uppercase. Press
the Shift key to activate this mode temporarily,
followed by another key. This displays the icon
at the bottom of the screen, until a second key is
pressed. Press the Shift key twice to lock this
mode. This displays the icon at the bottom of
the screen. Press the Shift key a third time to
unlock.
Optical Nav Pad
The optical nav pad is a small touchpad that lets
users start applications and move the cursor on
the screen. By default the cursor highlights text
and items. The cursor can be changed to an arrow
similar to a cursor on a PC. Press the orange fn
key then the key to toggle between highlight
and arrow cursors. See the ES400 User Guide for
configuration information.
Press the optical nav pad to select items and
launch applications.
NOTE If switching from one carrier to another,
refer to the ES400 User Manual for detailed
information.
Shift Key
End Call Key
OK Key
Optical Nav Pad
Email Key
Call Key
Scan Key
Orange fn Key
Start Key
Other manuals for ES400
4
Table of contents
Other Motorola Handheld manuals
Motorola
Motorola MOTOTRBO MC1000 User manual
Motorola
Motorola TETRA MTM800 User manual
Motorola
Motorola Symbol TC70 User manual
Motorola
Motorola MC65 User manual
Motorola
Motorola TETRA MTM800 User manual
Motorola
Motorola MOTOPro MPx User manual
Motorola
Motorola MC3090Z User manual
Motorola
Motorola MC40 User manual
Motorola
Motorola MC9190-G Assembly Instructions
Motorola
Motorola MC75 - Worldwide Enterprise Digital... User manual
Motorola
Motorola LEX L10i User manual
Motorola
Motorola MC21XX SERIES User manual
Motorola
Motorola IMPRES Tetra MTP700 Operating and maintenance manual
Motorola
Motorola WT41NO User manual
Motorola
Motorola ES400 User guide
Motorola
Motorola MC9500-K - Win Mobile 6.1 806 MHz User manual
Motorola
Motorola F4705A User manual
Motorola
Motorola MC9094-KUCHJERA6WR - MC9094-K - Win Mobile 6.1 Professional 624... User manual
Motorola
Motorola MC32N0 SERIES Assembly Instructions
Motorola
Motorola Symbol IP54 Configuration guide
