Motomaster 299-6952-8 User manual
Model no. 299-6952-8
TM/MC
Please read this manual carefully before using this air compressor
and save it for reference.
IMPORTANT: INSTRUCTION
MANUAL
12 V PROGRAMMABLE AIR
COMPRESSOR WITH LIGHT
2
Model no. 299-6952-8 / Contact us 1 888 942-6686
IF ANY PARTS ARE MISSING OR DAMAGED,
OR IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR TOLL-FREE HELPLINE AT
1 888 942-6686.
WARNING! Read and understand this instruction
manual thoroughly before using the product. It
contains important imformation for your safety
as well as operating and maintenance advice.
Keep this instruction manual for future use.
Should this product be passed on to a third
party, this instruction manual must be included.
INTRODUCTION
TM/MC
3
TABLE OF CONTENTS
TABLE OF CONTENTS
High-Pressure Applications
Features 5
4
Warning 6
6Pressure Preset
6
Operation
Inflating tires 7
Inflating sports equipment 7
Technical Specifications
8
8
Fuse replacement
Environmental Protection 9
HIGH-PRESSURE APPLICATIONS
4
• Car tires
• Bicycle tires
• Basketballs
• Sporting equipment
• Party balloons
Model no. 299-6952-8 / Contact us 1 888 942-6686
APPLICATIONS
FEATURES
Model no. 299-6952-8 / Contact us 1 888 942-6686
FEATURES
1
2
3
4
5
6
7
8
9
10
3
2
41
6
5
7
10
8
9
Digital gauge
Pressure preset button ’+’
BAR/PSI switch
Pressure preset button ’-’
Working light button
Compressor button
12 V adaptor
Air hose
Working light
Ball/balloon adaptors, back up fuse
FEATURES
TM/MC
5
6
WARNING
OPERATION
Pressure Preset
1
2
3
4
5
6
7
8
9
10
11
Please carefully read the manual included with this product. Misuse of the unit could
cause property/equipment damage and/or personal injury.
The preset pressure is factory set at 35 PSI when manufactured. Press BAR/PSI switch
to choose the desired unit (PSI/BAR).
Do not overinflate products beyond manufacture’s recommendations.
Do not allow the compressor or its components to get wet.
Do not leave the air compressor unattended while in operation.
Do not allow children to handle or operate this compressor.
Do not use this product for other than its intended use.
Do not disassemble or tamper with this compressor.
Inspect air compressor before use. If cracked, broken or damaged parts are found,
have them repaired or replaced by a qualified technician.
Never expose the air compressor to rain, frost or temperatures above 30°C (86°F)
or temperatures below -30°C (-22°F).
Never use on people or animals.
Make sure the cord is not exposed to hot objects, oil or sharp edges.
WARNING! For your own safety, you should only use accessories and parts
specified in the instructions, or recommended for use by the manufacturer.
This product is equipped with an auto shut-off digital pressure gauge. The digital gauge
can be used to monitor air pressure when inflating your desired objects, and can
automatically shut off once preset desired pressure is reached.
Model no. 299-6952-8 / Contact us 1 888 942-6686
WARNING
7
Inflating tires
Inflating sports equipment and/or small inflatables
Model no. 299-6952-8 / Contact us 1 888 942-6686
IMPORTANT
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
1. The product records the latest preset pressure. For example, if your preset pressure gauge is
35 PSI, the product records the preset pressure at 35 PSI for the next time.
2. Before reaching desired pressure, the compressor can shut off manually by pressing the
compressor button.
3. Do not adjust the preset pressure below the pressure of the object, or the air compressor
cannot start.
Press pressure preset buttons ‘+’ or ’-‘ to check the preset pressure. The preset
pressure is set at 35 PSI when manufactured.
Adjust your desired pressure by pressing the preset buttons ‘+/-‘. Press button ‘+’
to increase the pressure and press button ‘-‘ to decrease the pressure. Once the
desired pressure is reached, stop pressing the preset buttons. The display will
return to 0 PSI automatically which means the pressure is preset successfully and
the product is ready for inflating.
While inflating, do not press button ‘+’ or button ‘-’ as this will cause the air
compressor to stop working.
Roll out the 12 V cord and connect the 12 V adaptor to the vehicle’s 12 V outlet.
Adjust to your desired pressure. (Refer to Pressure Preset)
Screw the thread connection onto tire’s valve stem.
Press the compressor button and the compressor will begin to operate.
Press working light button for visibility in the dark. Press again to turn it off.
When car or bicycle tire’s pressure reaches preset pressure, the air compressor will
stop automatically.
Remove the thread connection from the tire and disconnect the 12 V adaptor.
Roll out the 12 V cord and connect the 12 V adaptor to the vehicle’s 12 V outlet.
Adjust to your desired pressure. (Refer to Pressure Preset)
Screw the ball/balloon adaptor into the thread connection.
Insert the ball/balloon adaptor into valve of objects to be inflated.
Press the compressor button and the compressor will begin to operate.
Press working light button for visibility in the dark. Press again to turn it off.
When the preset pressure is reached, the air compressor will stop automatically.
TM/MC
OPERATION
FUSE REPLACEMENT
TECHNICAL SPECIFICATIONS
8
1
2
3
8
9
CAUTION
Allow compressor to cool for 10 minutes after 10 minutes of continuous operation.
Remove the ball/balloon adaptor from the inflated object’s valve and unscrew the
ball/balloon adaptor from the thread connector. Put the ball/balloon adaptor back in
the storage.
Disconnect the 12 V adaptor from the outlet and store the 12 V cord in the
compartment area underneath.
15 A 250 V
To replace the fuse in the plug, twist off the upper cover.
Remove the faulty fuse and insert a new one.
Twist the upper cover back on the plug.
SKU#: 299-6952-8
Working Voltage: 12 V DC
Max. Pressure: 150 PSI
Fuse: 15 A
Accessories: 2 adaptors, 1 back up fuse
Model no. 299-6952-8 / Contact us 1 888 942-6686
TECHNICAL SPECIFICATIONS
Model no. 299-6952-8 / Contact us 1 888 942-6686
ENVIRONMENTAL PROTECTION
9
Do not dispose of this product with household garbage at the end of
its life cycle; hand it over at a collection point for the recycling of electrical
and electronic appliances. The symbols on the product, the instructions for
use or the packing will provide information about methods for disposal.
The materials are recyclable as mentioned in its marking. By recycling materials or other
forms of re-utilization of old appliances, you are making an important contribution to
protect our environment.
Made in China
Imported by MotoMaster Canada Toronto, Canada M4S 2B8
This MotoMaster product carries a one-(1)-year warranty against defects in workmanship and
materials. This product is not guaranteed against wear, breakage or misuse. Should this product
become defective within the stated warranty period, return it to the store with proof of purchase, and it
will be replaced or repaired free of charge.
Model no. 299-6952-8 / Contact us 1 888 942-6686
TM/MC
ENVIRONMENTAL PROTECTION
N° de modèle : 299-6952-8
TM/MC
Veuillez lire attentivement ce guide d’utilisation avant d’utiliser
ce compresseur d'air et le conserver aux fins de consultation
ultérieure.
IMPORTANT : GUIDE
D’UTILISATION
COMPRESSEUR D’AIR PROGRAMMABLE
DE 12 V AVEC LAMPE
Table of contents
Languages:
Other Motomaster Air Compressor manuals
