Morgan MSF-16P2 User manual

16” STAND

Fan MSF-16P2

Parts Identification

Specifications

Safety Precautions

Operating Instructions

Care and Cleaning

CONTENTS

2 -3

3 - 6

PARTS IDENTIFICATION

When using the appliance, especially when children are present, basic safety

precautions should always be followed including the following:

1. Read all instructions carefully before using the appliance.

2. Check that the voltage range given on the appliance-rating label corresponds

with that of your main power supply’s voltage.

3. This appliance is suitable for normal household use only and not for

commercial use.

4. Use the appliance only on a level working surface.

5. Do not hold the appliance on the slant while it is working.

6. Do not operate the appliance with a damaged cord or plug or after the

appliance malfunctions or has been dropped or damaged. Return the

appliance for examination, adjustments, or repair.

7. The use of attachments not recommended may cause fire, electrical shock, or

risk of injury.

8. Unplug the unit when not in use and whenever you clean or move the unit.

9. To disconnect the appliance, set control to OFF, grip plug and pull from wall

outlet. Never yank on cord.

10. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliances by a person responsible for their safety.

RATED VOLTAGE

220-240V~

RATED POWER

50W

FREQUENCY

50Hz

SIZE

16” (400MM)

SPECIFICATIONS

SAFETY PRECAUTIONS

11. Only authorized service personnel should undertake repairs on electrical

appliances. Faulty, unqualified repair work may cause accidents or injury to

the user.

12. If the supply cord is damaged, have it replaced by the manufacturer or its

service agent or a similarly qualified person in order to avoid a hazard.

Installing the fan body and base:

- Insert the fan body to the extension tube and lock into position with screw

as provided. Then, connect and fix it to the stand body.

- Insert the stand body to the base unit firmly. Reverse the whole unit and

secure the stand body by fitting the molded securing knob from the bottom

of the base unit.

- Ensure the stand body is completely interlocked with the base unit.

- Insert the screw to the stand body and lock it into position by turning it

clockwise. Loosen the height adjustment knob to extend the extension tube

to the required height and then tighten the securing knob.

Mount the fan blade onto the motor shaft; fasten the blade knob by turning

anti-clockwise firmly.

Installing the front guard:

- Open the front guard clip and attach the hook to the rear guard.

- Push the round edges of front guard to fit it securely into the rear guard.

- Lock the clip.

SAFETY PRECAUTIONS

OPERATING INSTRUCTIONS

Instructions for operation of body

OPERATING INSTRUCTIONS

Connect the plug into a power supply socket and switch on the power.

Switch on the fan by pressing the speed button at any of the “3”, “2” or “1”

settings.

Turn the “3”, “2” or “1” button to adjust the fan speed from High-Medium-Low.

To stop the fans, turn the speed knob to the “OFF” position.

To tilt the fan, always ensure that the fan is at ‘OFF’ position and wait until the

blade has completely stopped for safety reasons. Hold the stand firmly with one

hand and move the guard gently upwards or downwards.

The oscillation knob is positioned at the top of the rear motor. Press the knob

down to make the fan oscillate and pull it up to stop the oscillation.

To adjust the height of fan, always ensure that the fan is at off position and wait

until the blade has completely stopped for safety reason. Hold the stand firmly

and loosen the height adjust knob, then push up or pull down the extension tube

to adjust the fan height.

Always unplug the appliance first before cleaning!

Never immerse the main body in water or other liquids, clean it with a damp cloth.

Wipe the surfaces of the fan and base with a soft damp cloth.

Never use any corrosive cleaning solution.

Do not allow the motor or other electrical components to be exposed to water.

For proper storage, always place the appliance in a lowhumidity environment.

OPERATING INSTRUCTIONS

CARE AND CLEANING

Table of contents

Other Morgan Fan manuals

Morgan

Morgan MSF-16P1 User manual

Morgan

Morgan MSF-20MI1 User manual

Morgan

Morgan MTF-12T1 User manual

Morgan

Morgan MFT-AC46ED User manual

Morgan

Morgan MFQ-SB35W (GR) BREEZER User manual

Morgan

Morgan MFT-50R User manual

Morgan

Morgan MVF-WA80 User manual

Morgan

Morgan MFQ-SC61M User manual

Morgan

Morgan MWF-NC168MS User manual

Morgan

Morgan MWF-NB165RT User manual

Morgan

Morgan MFC-Eurus 360BK User manual

Morgan

Morgan MSF-16P3R User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual