MORECEVSE Wallbox User manual
HOLDERPLATE STATION
Mode C Station Overview
Wallbox Overview
SCREWS FOR HOLDER
HOOK
ALLEN KEY
30mm SCREWS
30mm PLASTIC BOLTS
REFERENCE PAPER
Accessories of Mode C
Display Screen
LED On/Off
Charging Plug
Level 2 EV Charging Station
Technical Parameters
Instruction for Use
Distribution Box
Wall
Charging Station
Holder
Button
Charging Plug
Hook
1 2
3
◆Hang the cable on the hook when it is not in use
Make sure the wallbox is connected to power
Press the buon on the right side
of the wallbox to start/stop charging
Connect the EV and the wallbox
with the EV charging cable
Installaon Method: Wall/Stand
Mode: C(with plug)
Cerficate: TUV,CE
IP Rang: IP66
Rated Voltage: 230VAC±10%
Rated Current: 16A
Maximum Power: 11kw
Phase Mode: Three Phase
Operang Temperature: -40℃～55℃Enclosure Material: ABS+PC alloy
Start Mode: Buon(default)
Security Protecon:
Warning and display funcons
Open circuit protecon
Output overcurrent protecon
Input under voltage protecon
Over temperature protecon
Ground protecon
Input overvoltage protecon
Charge status detecon
Installation Guide
REFERENCE PAPER
of installing screw hole size Hammer the
30mm PLASTIC BOLTS
into the holes
Take down the
REFERENCE PAPER
from the wall later
Embed STATION into
PLATE on the wall
This is the final completion pic,
you can put the HOOK
and HOLDER
anywhere you need
The cable can
be hung on the
HOOK and HOLDER
Fix the PLATE
with 30mm SCREWS
on the wall
Drill the holes
according to the
REFERENCE PAPER
Wall
Tear off the protector
Wallbox Overview
Accessories of Mode A
SOCKETPLATE STATION
95mm SCREWS
HOOK ALLEN KEY
30mm SCREWS
30mm METAL BOLTS
30mm PLASTIC BOLTS
REFERENCE PAPER
SCREW SHIM
Mode A Station Overview
Display Screen
LED On/Off
Socket
Level 2 EV Charging Station
Technical Parameters
Instruction for Use
Distribution Box Wall
Charging Station
Button
Charging Plug
Hook
◆Hang the cable on the hook when it is not in use
Make sure the walbox is connected to power
Press the buon on the right side of the wallbox
to start/stop charging
Connect the EV and the wallbox
with the EV charging cable
Installaon Method: Wall/Stand
Mode: A(with socket)
Cerficate: TUV,CE
IP Rang: IP66
Rated Voltage: 230VAC±10%
Rated Current: 16A
Maximum Power: 11kw
Phase Mode: Three Phase
Operang Temperature: -40℃to+55℃Enclosure Material: ABS+PC alloy
Start Mode: Buon(default)
Security Protecon:
Warning and display funcons
Open circuit protecon
Output overcurrent protecon
Input under voltage protecon
Over temperature protecon
Ground protecon
Input overvoltage protecon
Charge status detecon
Insert the plug into socket
Installation Guide
REFERENCE PAPER
of installing screw hole size
Hammer the
30mm PLASTIC BOLTS
into the holes
Hammer the
30mm METAL BOLTS
into the holes
Take down the
REFERENCE PAPER
from the wall later
Take out the plate from
the body of charging
SOCKET
Connect the inlet cable and
the power supply correctly
This is the final completion pic,
you can put the HOOK
anywhere you need
Drill the holes according to
the REFERENCE PAPER
Fix the PLATE with
30mm SCREWS on the wall
Embed STATION
into PLATE on the wall
Fix the SOCKET on the wall
with95mm SCREWS
by ALLEN KEY
and put the plate back to the
body of SOCKET
Screw Shim
Wall
The cable can be hung on the
HOOK
95mm SCREWS
Tear off the protector
Illustration of Screen and LED
Note: When small problems like short current occur, the wallbox will automacally restart to
repair and connue charging.
Wait for inserng the plug Wait for idenficaon
Wait for the car to be ready During charging process Stop charging and wait for
pulling out the plug
Start-up screen
(the version no. is for reference only)
1.Real-me power
2.Three Live Wire data
4.Power consumpon
6.PCB Temperature
3.Charging me
5.Charging icon
1.Emergency stop
3.Over Temperature
2.Over Current
4.Leakage protecon
5.Short Current
Possible
fault warning
For serious failures, the system can not automacally recover, in order to remind the user of
this failure, aer the user pulls the plug, the system will automacally countdown 10 seconds to
restart
IDLE CONNECTED CHARGING FINISHED ERROR
Instrucon
of LED Status
OFF Connuous
light
Connuous
light
Rolling Red
flashing
Maintenance & Overhaul
Security Warning
AC charging staons are subject to stringent quality inspecons. Mode 2 Charging is subject to
stringent quality inspecons. From the day of purchase, any problem of product quality can be
reflected to the dealer within two years.
Any direct damage or malfuncon caused by neglect, incorrect use, installaon, usage, repair by
the users or natural damage are not covered by the warranty.
In order to ensure the normal service life of the charging staon and reduce risk, maintenance
must be performed within the specified me. The maintenance of the equipment must be
completed by professionals with qualifed and safe maintenance tools.
The product is already packed in factory. During transportaon, strong impact and bumps should
be avoided to avoid damage to the outer packaging of the product.
The product should be placed at an ambient temperature of -40 ℃～55℃ with a relave
humidity of no more than 95%. The air should not contain acids, alkalis ot other corrosive gases
and explosive gases.
Failure to follow instrucons may result in danger!
▲Regularly check whether the charging staon has visible damage. There may be a electric
shock when operang the broken charging staon.
▲Make sure that all safety facilies are available at all mes and are tested regularly to
ensure they can operate normally.
▲If a ground fault occurs, it must be assumed that the cable carries voltage. Please confirm
that there’s no high-voltage power in the system before inspecng the charging staon.
▲Persons who install and use charging staons must obey the principles and regulaons
menoned to ensure the personal safety and equipment safety.
▲Before powering on the device, please confirm that the device is properly grounded to
avoid unnecessary accidents.
▲All tools’ unnecessarily exposed metal parts should be insulated to prevent them from
touching the metal frame to avoid short circuit.
▲Do not modify, retrofit, or change any part by yourself under any circumstances.
▲To ensure the service life and stable operaon of the charging staon, the operang
environment should be kept as clean as possible with a relavely stable temperature and
humidity. The charging staon must not be used in flammable environment or environments
with volale gas.
▲Be sure to confirm that the input voltage, frequency, circuit breakers and other condions of
the device meet the specificaons before the device is powered on.
+86-025-8662-3210
No.128,Aoti,Jianye District, Nanjing, Jiangsu, China
(Please do not contact the manufacturer's phone for after-sales questions)
MANUFACTURER
Nanjing LuAo international tradeCo.,Ltd.
HALTERPLATTE STATION
Modus C Station Übersicht
Wallbox-Übersicht
SCHRAUBEN FÜR HALTER
HAKEN30MM SCHRAUBEN
30MM KUNSTSTOFFBOLZEN
ALLEN KEY
REFERENZPAPIER
Zubehör für Modus C
Anzeigebildschirm
LED An / Aus
Ladestecker
Ladestation für Stufe 2 EV
Spezifikation
Bedienungsanleitung
Verteilerkasten
Wand
LADESTATION
Halter
Taste
Ladestecker
Haken
1 2
3
◆ Hängen Sie das Kabel an den Haken, wenn es nicht verwendet wird
Stellen Sie sicher, dass die Wallbox an die Stromversorgung
angeschlossen ist
Drücken Sie die Taste auf der
rechten Seite der Wallbox,
um den Ladevorgang zu starten
oder zu stoppen
Verbinden Sie den EV und die
Wallbox mit dem EV-Ladekabel
Installaonsmethode: Wand / Pol
Modus: C (mit Stecker)
Zerfikat: TÜV, CE
IP66
Spannungsbereich: 230V ± 10%
Betriebsstrom: 16Amp
Maximale Leistung: 11KW
Phasenmodus: Einzelphase
Betriebstemperatur: -40°C～ 55°C
Schalenmaterial: ABS+PC Legierung
Startmodus: Schalläche (Standardeinstellung)
Sicherheitsschutz:
Warn- und Anzeigefunkonen
Kurzschlussschutz
Schutz für Ausgangsüberstrom
Eingang unter Spannungsschutz
Übertemperaturschutz
Bodenschutz
Schutz für Eingangsüberspannung
Erkennung des Ladezustandes
Table of contents
Languages:
