MOOV MI500 User manual
Moov Inverter
MI500-MI650-MI900-MI(C)1100-MI(C)1400
Inverter Heat Pump for Swimming Pools
Please read the manual in real time
Content
I. Application .............................................................................................. 3
II. Features .................................................................................................. 3
III. Technical Parameter ............................................................................. 4
IV. Dimension ............................................................................................... 5
V. Installation instruction ........................................................................... 6
VI. Operation instruction ........................................................................... 10
VII. Testing ................................................................................................... 13
VIII. Precautions .......................................................................................... 14
IX. Maintenance ......................................................................................... 15
X. Trouble shooting for common faults ................................................. 15
XI. Warranty & After-Service……………………………………………...17
1
A little thank you from us:
Thanks for trusting us!
We know how much your time is valuable and we want to make sure you
enjoy as much as possible the swimming season. By choosing Moov
Pool Products, you’re choosing amongst the most innovative products
there is on the market.
For over 30 years pool heat pumps knew little innovation… Until now.
The Moov Inverter uses an Inverter technology in its compressor which
allows it to modulate its speed to your needs. This new feature allows
your product to do much more than any other on the market such as:
Lowest electrical usage for the most thrifty electrical bill.
Most silent heat pump on the market.
Higher coefficient of performance to maximize its efficiency as
confirmed by AHRI.
Longer durability with lower electrical requirements and smart
utilization.
We ask of you to read this manual carefully and operate the unit strictly
to what is detailed below. Not following such indications can cause
damage to the heat pump or any user of the product. If any questions
arise at any point, please reach out to the technical service team at Moov
Pool Products.
Sit back, relax, and welcome to Moov!
The team at Moov
2
Special Attention:
A. This product is only for swimming pool water heating applications and
can’t be used for the heating for any other liquid materials.
B. The inlet and outlet water nozzles can’t bear the weight of external
pipes.
C. The main power switch should be out of the reach of children.
D. Make sure the power is switched off before opening the case of the
product.
NOTE:
A. The swimming pool heat pump must be installed by a qualified
electrician. These regulations may change depending on the Country,
Province or State you live in.
B. To maximize your swimming comfort, set proper heating temperature.
The recommended heating temperature is 85’F. The unit can work above
and below this recommendation up to a specific capacity depending on
operating conditions. Please contact Moov for more information.
C. Don’t put obstacles near the air inlet and outlet of the heat pump.
D. This heat pump has power-off memory function.
E. When the ambient temperature is below 3’C, make sure to switch off
the main power, and drain off the water from heat exchanger.
F. Never place your hand or any other object in the air inlet or outlet of
the heat pump.
G. If any abnormal circumstances discovered, ex: abnormal noise, smells,
smokes and leakage of electricity, switch the main power off immediately
and contact your local dealer/installer or Moov Pool Products directly. Do
not try to repair the heat pump yourself.
3
I. Application
1- Set swimming pool water temp efficiently and economically to
provide you comfort and pleasure.
2- User may choose the model based off technical parameters
presented in this manual. This series of swimming pool heater has
been optimized in factory (refer to technical parameter table).
II. Features
1- Sensitive and accurate temp control and water temp display.
2- High-pressure and low-pressure protection.
3- Protection in case of too low or no water flow
4- Exceeding low temp auto stop protection.
5- Temp control compulsory defrosting.
6- International brand compressor.
7- High efficient titanium heat exchanger
8- Easy installation and operation.
4
III. Technical Parameter
Model MI500 MI650 MI900 MI1100 MI1400
Voltage 208-230V 208-230V 208-230V 208-230V 208-230V
Frequency/phase 60Hz/1Ph 60Hz/1Ph 60Hz/1Ph 60Hz/1Ph 60Hz/1Ph
Heating current
(air80°F,water80°F) A 2.00-11.0
2.30-14.8
2.34~19.1
2.65~25.6
3.69~29.8
Heating power
(air80°F,water80°F) kW 0.46-2.53
0.53-3.39
0.54~4.39 0.61~5.9
0.85~6.85
Design pressure (High)
≤609 PSIG ≤609
PSIG
≤609
PSIG
≤609
PSIG
≤609
PSIG
Design pressure (Low) ≤261 PSIG ≤261
PSIG
≤261
PSIG
≤261
PSIG
≤261
PSIG
Refrigerant(R410A) oz 38.8 45.9 98.8 141.1 247
Net weight Kgs 52 62 103 113 144
Water circulation flow L/min
83~116 108~142 125~158 133~167 145~179
Noise at 10Feet dB(A) ≤50 ≤50 ≤50 ≤50 ≤50
Waterproof class IPX4 IPX4 IPX4 IPX4 IPX4
Notice:
1. This product works well under water temp 80oF to104oF, air temp 32oF to 109oF,
efficiency will not be guaranteed out of this range. Please take into consideration that
the pool heater performance and parameters are different under various conditions.
Always refer to your pool expert on the correct unit for the size of your pool and your
needs as these will vary depending on operating conditions. You may also contact
Moov Pool Products for confirmation.
2. Related parameters are subject to adjustment periodically for technical
improvement without further notice. For details on your unit please refer to the
nameplate on the product.
5
IV. Dimension
※ Above data is subject to modification without notice.
A B C D E F G H
MI500 12.4 23.2
12.3
13.4
37.8 13.0
2.9 25.9
MI650 15.6
23.2
15.4
16.5
37.8 15.4
2.9 29.8
MI900 15.6
28.3
15.4
16.5
43.0 24.4
2.9 37.7
A B C D E F G H
MI1100 36.3
17.6
35.6
37.2
27.8
20.9
3.3
38.5
MI1400 39.8
20.5
32.3
40.8
39.2
20.9
3.3
41.5
Name Size(inch)
Model
Name
Size(inch)
Model
C
H
D
A
E
FG
B
6
Note:
The picture above is the specification diagram of the pool heater, for
technician’s installation and layout reference only. The product is subject
to adjustment periodically for improvement without further notice.
V. Installation instruction
1. Drawing for water pipes connection.
（Notice：The drawing demonstration and layout of the pipes is only for reference.）
7
2. Electric Wiring Diagram
Note：1) Must be hard wired, no plug allowed.
2) The swimming pool heater must be grounded.
Options for protecting devices and cable specification
※ Above data is subject to modification without notice.
Note: The above data is adapted to power cord ≤ 10 m. If power cord is
＞10 m, wire diameter must be increased. The signal cable can be
extended to 50 m at most.
MODEL MI500 MI650 MI900 MI1100
MI1400
Breaker
Rated Current
A 20 30 30 40 50
Rated
Residual
Action
Current
mA
30 30 30 30 30
Fuse A 20 30 30 40 50
Power Cord （AWG） 2×12 2×10 2×10 2×8 2×8
Signal cable （AWG） 2×20 2×20 2×20 2×20 2×20
Grounding
Grounding
8
2. Installation and Requirements
The swimming pool heater must be installed by a pool professional. End users are
not qualified to install the heater. Damage may occur to the heater or threaten the
safety of the user. Pool professional guidelines will vary depending on your country,
state or province regulation and can include HVAC technicians or electricians.
Warranty will be voided if done otherwise.
A. Installation
1) The swimming pool heater should be installed in a location with good ventilation;
2) The frame must be fixed by bolts (M10) to concrete foundation or brackets. The
concrete foundation must be solid and fastened; the bracket must be strong and
antirust treated;
3) Don’t stack substances that will block air flow near inlet or outlet area, and no
barrier within 20in behind the main heater, or the efficiency of the heater will be
reduced or even halted;
4) The heater needs an appended pump (Supplied by the user). The recommended
pump specification-flux: refer to Technical Parameter, Max. lift ≥10m;
5) When the heater is running, there will be condensation water discharged from the
bottom. Attach the drainage nozzle (accessory for MI500-MI650-MI900 models)
into the hole under the unit, then connect the pipe to drain the condensation water
out.
Ｂ．Wiring
1) Connect to appropriate power supply; the voltage should comply with the rated
voltage of the products.
2) Heater must be grounded.
3) Wiring must be handled by a professional technician respecting circuit diagram.
4) Moov Inverter units do not require a GFCI to function. If required by code, please
respect following guidelines.
i. Set GFCI according to the local code for wiring (current leakage ≤ 30mA).
ii. Some GFCI breakers may cause nuisance trips with variable speed
products. Consult a certified electrician, your retailer or Moov to confirm
wiring. Product Warranty does not cover electrical wiring.
5) The layout of power cable and signal cable should be orderly and not interfere
This manual suits for next models
6
Table of contents
Languages:
