MonsterLabo The Beast User manual
MonsterLabo
The Beast
USER MANUAL
1
2
Before you start using The Beast, please follow these basic guidelines:
•Protect the table with a towel or any other protective fabric before placing your Beast on it.
•Do not wear rings, bracelets or watch that could scratch the case during the unboxing and the assembly.
•Test the components you plan to assemble into your Beast before starting their assembly.
•Never lift your Beast by the side panels.
•Keep the shipping boxes.
•And -of course -read carefully the user manual before beginning with the assembly process.
Thank you for choosing The Beast.
Enjoy the silence!
MLTeam
3
GPU side
The right side
4
The unboxing……………………………………………………………………………………………………………………………………………….….p5
The box of accessories…………………………………………………………………………………………………………………………….……p10
The fans…………………………………………………………………………………………………………………………………………………….…….p15
The power supply…………………………………………………………………………………………………………………………………………..p19
The storage (1/2) …………………………………………………………………………………………………………………………………………..p20
The motherboard……………………………………………………………………………………………………………………………………….…..p21
The graphic card…………………………………………………………………………………………………………………………………………….p27
with spreader……………………………………………………………………………………………………………………………p28
without spreader……………………………………………………………………………………………………………………..p34
The storage (2/2) …………………………………………………………………………………………………………………………………………..p41
The cable management…………………………………………………………………………………………………………………………………p43
The fanless optimization……………………………………………………………………………………………………………………………….p45
The dust……………………………………………………………………………………………………………………………………………………………p48
Table of content
The unboxing
5
1. Place horizontally the box on the floor.
The unboxing The box of
accessories The fans The power supply The storage (1/2) The motherboard The graphic card
With spreader
Without spreader
The storage (2/2) The cable
management
The fanless
optimization The dust
2. Open the box by the bottom and remove the protective foam.
The unboxing
6
3. Carefully slide off the inner box to the outside. To avoid any
shoc and damage to the side panels, you can place a towel or
any protective fabric.
The unboxing The box of
accessories The fans The power supply The storage (1/2) The motherboard The graphic card
With spreader
Without spreader
The storage (2/2) The cable
management
The fanless
optimization The dust
4. Keep the inner box horizontally.
The unboxing
7
5. Open the box by the bottom.
The unboxing The box of
accessories The fans The power supply The storage (1/2) The motherboard The graphic card
With spreader
Without spreader
The storage (2/2) The cable
management
The fanless
optimization The dust
6. Fold the bottom flaps outwards and carefully move the box
vertically.
The unboxing
8
7. Slide the box from the top. Remove the protective foams.
Remove the protective packaging by hand, not with a cutter, to
avoid scratches.
The unboxing The box of
accessories The fans The power supply The storage (1/2) The motherboard The graphic card
With spreader
Without spreader
The storage (2/2) The cable
management
The fanless
optimization The dust
Never lift the case by the
side panels, only by the
bottom parts (the feet).
The unboxing
9
8. Protect the table where you will assemble your components (the
feet might scratch the surface –protective pads are available
into the box of accessories).
9. Open the case by pulling on the side panels (tempered glasses
or aluminum side panels). Be careful, the sides panel are not
symmetrical.
The unboxing The box of
accessories The fans The power supply The storage (1/2) The motherboard The graphic card
With spreader
Without spreader
The storage (2/2) The cable
management
The fanless
optimization The dust
10.Take off the box of accessories placed into your case.
Picture to come
The unboxing The box of
accessories The fans The power supply The storage (1/2) The motherboard The graphic card
With spreader
Without spreader
The storage (2/2) The cable
management
The fanless
optimization The dust
The box of accessories
10
If you bought a « The Beast & Accessories » package, this is the content of the box of
accessories. For those who ordered a « Only The Beast », your box of accessories only
contains the little bags of screws for each component and accessory. The box of
accessories might be different depending on the cooler for your graphic card and the
additional accessories you bought in addition to your Beast.
Table of contents
Other MonsterLabo Enclosure manuals
