Monoprice Blackbird 39666 User manual
Blackbird™ 4K 4x1 HDMI® Switch
P/N 39666
User's Manual
2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra
attention to these safety warnings and guidelines. Please keep this
manual in a safe place for future reference.
•This device is intended for indoor use only.
•Do not expose this device to water or moisture of any kind. Do
not place drinks or other containers with moisture on or near
the device. If moisture does get in or on the device,
immediately unplug it from the power outlet and allow it to
fully dry before reapplying power.
•Do not touch the device, the power cord, or any other
connected cables with wet hands.
•Do not expose this device to excessively high temperatures.
Do not place it in, on, or near a heat source, such as a fireplace,
stove, radiator, etc. Do not leave it in direct sunlight.
•Do not place or install this device in an area where it can be
exposed to excessive amounts of dust, humidity, oil, smoke, or
combustible vapors.
•Prior to operation, check the unit and power cord for physical
damage. Do not use if physical damage has occurred.
3
•Before plugging the unit into a power outlet, ensure that the
outlet provides the same type and level of power required by
the device.
•Unplug this device from the power source when not in use.
•Take care to prevent damage to the power cord. Do not allow
it to become crimped, pinched, walked on, or become tangled
with other cords. Ensure that the power cord does not present
a tripping hazard.
•Never unplug the unit by pulling on the power cord. Always
grasp the connector head or adapter body.
•Ensure that power is turned off and disconnected before
making any electrical connections.
•Remove the batteries from the controller if it will go unused
for a lengthy period of time.
•Clean using a soft, dry cloth only. Do not use chemical
cleaners, solvents, or detergents. For stubborn deposits,
moisten the cloth with warm water.
•This device has no user serviceable parts. Do not attempt to
open, service, or modify this device.
4
INTRODUCTION
This Blackbird™ 4K 4x1 HDMI® Switch allows you to connect up to four
HDMI source devices to a single HDMI display. It supports video
resolutions up to 4K@60Hz, including 1080p@60Hz and all 3D video
modes. It can extract audio from the HDMI source to the combined
3.5mm analog stereo/mini Toslink® digital optical jack on the rear panel.
It supports HDCP™ 2.2, EDID® management, and is compliant with the
HDMI 2.0a standard, including support for the Audio Return Channel
(ARC) feature.
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring
that your ordering, purchasing, and delivery experience is second to
none. If you have any problem with your order, please give us an
opportunity to make it right. You can contact a Monoprice Customer
Service representative through the Live Chat link on our website
the website for support times and links.
5
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have
all the items listed below. If anything is missing or damaged, please
contact Monoprice Customer Service for a replacement.
1x Blackbird™ 4x1 HDMI® Switch
1x AC Power Adapter (5 VDC, 1A)
1x IR Remote Control
1x 38kHz IR Receiver
1x Mini Toslink® to Toslink Audio Converter
1x User's Manual
PRODUCT OVERVIEW
Front Panel
1. Input Indicators: The LEDs illuminate to indicate the current
input selection.
6
2. Auto/Source Button: Press and hold the button for about 2
seconds to toggle between manual and automatic source
selection. The Auto LED illuminates when in Auto mode. When
in Manual mode, momentarily press the button to cycle
through the available inputs.
3. EDID Status Indicators: One of the LEDs illuminates to indicate
the current EDID® status.
4. EDID Button: Momentarily press the button to cycle through
the available EDID modes.
5. ARC Status Indicator: The LED illuminates when the Audio
Return Channel (ARC) feature is enabled.
6. ARC On/Off Button: Momentarily press the button to enable
or disable the ARC feature.
Rear Panel
1. Out: HDMI® output port for connecting an HDMI display.
2. In1-4: Four HDMI input ports for connecting HDMI video
source devices.
7
3. Audio: 3.5mm combined stereo analog and multichannel mini
Toslink® digital optical audio output jack.
4. RS232: RS-232 control jack.
5. IR: 3.5mm jack for connecting the included IR receiver.
6. DC 5V In: DC barrel connector for connecting the included AC
power adapter.
Remote Control
•ARC: Momentarily press the ARC button
to enable or disable the Audio Return
Channel (ARC) feature.
•Auto/2.1ch/5.1ch/7.1ch: Press one of
these buttons to set the EDID® mode.
•In1-4: When manual input selection
mode is active, momentarily press one
of the buttons to select the input source.
•Auto Source: Momentarily press the
button to toggle between manual and
automatic input source selection modes.
8
SAMPLE CONNECTION DIAGRAM
9
SPECIFICATIONS
Model
39366
Video Bandwidth
18Gbps
HDMI® Version
2.0a with HDCP™ 2.2/1.4
Video Inputs
4x HDMI
Miscellaneous Inputs
1x 3.5mm IR, 1x 3.5mm RS-232
Video Outputs
1x HDMI
Audio Outputs
1x 3.5mm combined analog
stereo/mini Toslink® jack
Supported Audio Formats
2.0/2.1/5.1/7.1 channel
Input Power
5 VDC, 1A
AC Adapter Input Power
100 ~ 240 VAC, 50/60 Hz
Power Consumption
Up to 2.5 watts
Operating Temperature
+32 ~ +104°F (0 ~ +40°C)
Storage Temperature
-4 ~ +140°F (-20 ~ +60°C)
Dimensions
7.1" x 3.3" x 0.5" (180 x 85 x 12 mm)
Weight
10.6 oz. (300g)
10
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to
assist you with any questions you may have about installation, setup,
troubleshooting, or product recommendations. If you ever need
assistance with your new product, please come online to talk to one of
our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website
www.monoprice.com or through email by sending a message to
[email protected]. Check the website for support times and links.
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Modifying the equipment without Monoprice's authorization may
result in the equipment no longer complying with FCC requirements for
Class B digital devices. In that event, your right to use the equipment
may be limited by FCC regulations, and you may be required to correct
Table of contents
Other Monoprice Switch manuals
Monoprice
Monoprice 10320 User manual
Monoprice
Monoprice DRM-1712F+ User manual
Monoprice
Monoprice 24280 User manual
Monoprice
Monoprice 38295 User manual
Monoprice
Monoprice Blackbird 36633 User manual
Monoprice
Monoprice MD-415ARC User manual
Monoprice
Monoprice 38161 User manual
Monoprice
Monoprice 10319 User manual
Monoprice
Monoprice HDX-401E User manual
Monoprice
Monoprice Blackbird User manual
Monoprice
Monoprice 4x2 HDMI User manual
Monoprice
Monoprice 38298 User manual
Monoprice
Monoprice 30919 User manual
Monoprice
Monoprice Blackbird 44555 User manual
Monoprice
Monoprice 3407 User manual
Monoprice
Monoprice Blackbird 43879 User manual
Monoprice
Monoprice 8146 User manual
Monoprice
Monoprice Blackbird 31057 User manual
Monoprice
Monoprice 24740 User manual
Monoprice
Monoprice Blackbird 21614 User manual
