Monoprice 43021 User manual
34" CrystalPro™ 4K UWQHD Monitor
P/N 43021
User's Manual
2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to
these safety warnings and guidelines. Please keep this manual in a safe place for
future reference.
•This device is intended for indoor use only.
•Do not expose this device to water or moisture of any kind. Do not place
drinks or other containers with moisture on or near the device. If
moisture does get in or on the device, immediately remove it from its
power source and allow it to fully dry before reapplying power.
•Do not touch the device, the power cord, or any other connected cables
with wet hands.
•Do not place the monitor on an unstable surface where it could fall and
cause either personal injury or damage to the monitor and/or other
equipment.
•Do not expose this device to excessive vibration or extreme force,
shock, or fluctuations in temperature or humidity.
•Do not expose this device to excessively high temperatures. Do not
place it in, on, or near a heat source, such as a fireplace, stove, radiator,
etc. Do not leave it in direct sunlight.
•This device ventilates excessive heat through the slots and openings in
the case. Do not block or cover these openings. Ensure that the device is
in an open area where it can get sufficient airflow to keep from
overheating.
•Do not place or install this device in an area where it can be exposed to
excessive amounts of dust, humidity, oil, smoke, or combustible vapors.
•Prior to operation, check the unit and power cord for physical damage.
Do not use if physical damage has occurred.
3
•Before plugging the unit into a power outlet, ensure that the outlet
provides the same type and level of power required by the device.
•Take care to prevent damage to the power cord. Do not allow it to
become crimped, pinched, walked on, or become tangled with other
cords. Ensure that the power cord does not present a tripping hazard.
•Never unplug the unit by pulling on the power cord. Always grasp the
connector head or adapter body.
•Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents,
or detergents. For stubborn deposits, moisten the cloth with warm
water.
•This device has no user serviceable parts. Do not attempt to open,
service, or modify this device.
•Do not leave a single image on the display for a long period of time.
Doing so could cause "burn-in" of the image. It is recommended to use a
variable desktop background and to use a screen saver to prevent "burn-
in". Alternatively, ensure that the monitor is powered off for at least 2
hours out of every 12.
CUSTOMER SERVICE
The Monoprice™ Customer Service department is dedicated to ensuring that
your ordering, purchasing, and delivery experience is second to none. If you have
any problem with your order, please give us an opportunity to make it right. You
can contact a Monoprice Customer Service representative through the Live Chat
link on our website www.monoprice.com or via email at
support@monoprice.com. Check the website for support times and links.
4
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the
items listed below. If anything is missing or damaged, please contact
Monoprice™ Customer Service for a replacement.
1x 34" CrystalPro™ 4K UWQHD
Monitor
1x AC Power Adapter
1x AC Power Cord
1x Stand Stem
1x Stand Base
1x HDMI® Cable
1x User's Manual
SETUP
Perform the following steps to prepare your monitor for use.
1. Either assemble the stand and attach it to the rear of the monitor or
mount the monitor to a wall or desk mount.
2. Plug one end of the included HDMI® cable into one of the HDMI inputs
on the monitor, then plug the other end into the HDMI video output on
your computer. Alternatively, you can connect using a DisplayPort® cable
(available separately).
5
3. (Optional) Plug a pair of headphones or powered speakers into the audio
output on the monitor.
4. Plug the DC barrel connector on the included AC power adapter into the
DC input on the monitor.
5. Plug one end of the included AC power cord into the AC power adapter,
then plug the other end into a nearby AC power outlet. The LED power
indicator on the monitor will illuminate orange, indicating that the
monitor is in standby mode.
OPERATION
Pressing any of the five buttons other than the button will cause menu icons
to appear on screen above the buttons. The Top Level of menu options are as
follows.
View Mode: Pressing the button with this icon opens the View Mode
menu, which allows you to select the Standard, Game, Movie, Web, Text, MAC,
or Mono display modes.
Display: Pressing the button with this icon opens the Display menu,
which allows you to adjust the Contrast and Brightness.
Input Select: Pressing the button with this icon opens the Input Select
menu, which allows you to select the HDMI1, HDMI2, or DisplayPort inputs.
Main Menu: Pressing the button with this icon opens the Main Menu.
Refer to the
MENU MAP
section for details of the Main Menu.
6
Exit: Pressing the button with this icon exits the Top Level menu.
When any menu is opened, a combination of the following icons will appear
above the buttons, which allow control of the menu. The buttons perform the
following functions.
Up: Pressing the button with this icon moves the menu highlight up.
Down: Pressing the button with this icon moves the menu highlight
down.
Left: Pressing the button with this icon moves the menu highlight left or
decreases the value being edited.
Right: Pressing the button with this icon moves the menu highlight right
or increases the value being edited.
Select: Pressing the button with this icon selects the highlighted menu
option for navigation or editing.
Return: Pressing the button with this icon returns to the previous entry
or exits editing while saving any changes.
7
Exit: Pressing the button with this icon exits the selected option or
cancels editing without saving any changes.
Main Menu: Pressing the button with this icon displays the Main Menu.
Press and hold the button for several seconds to exit the Main Menu.
MENU MAP
The following menu map shows all options in the Main Menu. Each level of
indentation indicates how deep the option is from the top entry in the Main
Menu. The entries in parentheses show the editable options, either as individual
entries or as a range of values, with the value after the ± indicating the
increment of change along the range. For example, ±1 indicates that each
8
increase or decrease changes the value by 1, while ±10 indicates that each
increase or decrease changes the value by 10.
Input Select
HDMI1
HDMI2
DisplayPort
Audio Adjust
Volume (0-100, ±1)
Mute (On, Off)
View Mode
Standard
Black Stabilization (0-100, ±10)
Advanced DCR (0, 50, 75, 100)
Blue Light Filter (0-100, ±1)
Response Time (Standard, Advanced, Ultra Fast)
Recall
Game
GAMER 1
Black Stabilization (0-100, ±10)
Advanced DCR (0, 50, 75, 100)
Blue Light Filter (0-100, ±1)
Response Time (Standard, Advanced, Ultra Fast)
Rename (12 characters, A-Z 0-9 . , - _ * ( ) space)
Recall
GAMER 2
9
Black Stabilization (0-100, ±10)
Advanced DCR (0, 50, 75, 100)
Blue Light Filter (0-100, ±1)
Response Time (Standard, Advanced, Ultra Fast)
Rename (12 characters, A-Z 0-9 . , - _ * ( ) space)
Recall
GAMER 3
Black Stabilization (0-100, ±10)
Advanced DCR (0, 50, 75, 100)
Blue Light Filter (0-100, ±1)
Response Time (Standard, Advanced, Ultra Fast)
Rename (12 characters, A-Z 0-9 . , - _ * ( ) space)
Recall
FPS1
FPS2
RTS
MOBA
Movie
Web
Text
MAC
Mono
Color Adjust
Contrast/Brightness
Contrast (0-100, ±1)
10
Brightness (0-100, ±1)
Color Temperature
sRGB
Bluish
Cool
Native
Warm
User Color
Red (0-100, ±1)
Green (0-100, ±1)
Blue (0-100, ±1)
Color Space (Auto, RGB Mode, YUV Mode)
Color Range (Auto, Full Range, Limited Range)
HDR10 (On, Off)
Manual Image Adjust
Sharpness (0-100, ±25)
Aspect Ratio (Fill Aspect Ratio, Full Screen)
Overscan (On, Off)
Setup Menu
Language Select (English, French, German, Spanish, Italian, Suomi,
Russian, Turkish, Japanese, Korean, Simplified Chinese,
Mandarin)
Resolution Notice (On, Off)
Information (Resolution, H. Frequency, V. Frequency, Pixel Clock)
OSD Timeout (0, 5, 15, 30, 60)
Other manuals for 43021
1
Table of contents
Other Monoprice Monitor manuals
Monoprice
Monoprice 10707 User manual
Monoprice
Monoprice 24656 User manual
Monoprice
Monoprice 30618 User manual
Monoprice
Monoprice Dark Matter 40778 User manual
Monoprice
Monoprice Dark Matter 44632 User manual
Monoprice
Monoprice 15481 User manual
Monoprice
Monoprice 11996 User manual
Monoprice
Monoprice 37923 User manual
Monoprice
Monoprice 38035 User manual
Monoprice
Monoprice 24657 User manual
Monoprice
Monoprice 6960 Instruction Manual
Monoprice
Monoprice 38577 User manual
Monoprice
Monoprice 16384 User manual
Monoprice
Monoprice Dark Matter 42772 User manual
Monoprice
Monoprice 12178 User manual
Monoprice
Monoprice 27771 User manual
Monoprice
Monoprice 13808 User manual
Monoprice
Monoprice 12520 User manual
Monoprice
Monoprice 10509 User manual
Monoprice
Monoprice 10734 User manual
