Monoprice Blackbird 44571 User manual

Blackbird™ by Monoprice™

P/N 44571

User Manual

HDBaseT 3.0 Extender 70M 4K60Hz KVM

USB 2.0 / Audio / RS-232

Thank You for Purchasing this Product

Surge Protection Device Recommended

Safety Warnings and Guidelines

To ensure optimum performance and safety, read the following

instructions before connecting, operating, or adjusting the product.

Keep this manual for future reference.

This product contains sensitive electrical components that may be

damaged by electrical spikes, surges, electric shocks, lightning strikes,

etc. The use of surge protection systems is highly recommended to

protect and extend the life of your equipment.

Please read this entire manual before using this device, paying extra

attention to these safety warnings and guidelines. Please keep this

manual in a safe place for future reference.

• This device is intended for indoor use only.

• Do not expose this device to water or moisture of any kind. Do not

place drinks or other containers with moisture on or near the device.

• If moisture does get in or on the device, immediately unplug it from

the power outlet and allow it to fully dry before reapplying power.

• Do not touch the device, the power cord, or any other connected

cables with wet hands.

• Do not expose this device to excessive vibration.

• Do not subject the product to extreme force, shock, or uctuations

in temperature or humidity.

• Do not expose this device to excessively high temperatures. Do not

place it in, on, or near a heat source, such as a replace, stove,

radiator, etc. Do not leave it in direct sunlight.

• This device ventilates excessive heat through the slots and openings

in the case.

• Do not block or cover these openings. Ensure that the device is in an

open area where it can get sucient airow to keep from

overheating.

• Prior to operation, check the unit and power cord for physical

damage. Do not use if physical damage has occurred.

• Before plugging the unit into a power outlet, ensure that the outlet

provides the same type and level of power required by the device.

• Never unplug the unit by pulling on the power cord. Always grasp

the connector head or adapter body.

• Ensure that power is turned o and disconnected before making any

electrical connections.

• Clean using a soft, dry cloth only. Do not use chemical cleaners,

solvents, or detergents. For stubborn deposits, moisten the cloth

with warm water.

• This device has no user serviceable parts. Do not attempt to open,

service, or modify this device.

Table of Contents

Introduction..................................................................................................................4

Features..........................................................................................................................4

Package Contents.......................................................................................................5

Operation Controls and Functions......................................................................6

Transmitter Panel........................................................................................................6

Receiver Panel..............................................................................................................8

IR Pin Denition...........................................................................................................9

Application Example................................................................................................10

Specications..............................................................................................................11

1. Introduction

2. Features

The 18Gbps HDBaseT 3.0 Extender extends uncompressed HDMI

signals, RS-232, bi-directional IR, and USB2.0 signals up to 230ft

(70m) (4K30/1080P) or 131ft (40m) 4K60 using a single CAT6A cable.

It supports video resolution up to 4K2K@60Hz YUV 4:4:4. The

Transmitter has HDMI input and audio extraction capabilities; whereas,

the Receiver has HDMI output and audio extraction capabilities. The

Extender supports bi-directional RS- 232 and IR signal pass-through,

EDID management, USB2.0 signal transmission, and bi- directional POC

function.

This Extender provides a convenient solution for HDMI extension via a

single CAT cable with long-distance capability, making it ideal for both

home and commercial applications.

• HDMI 2.0b and HDCP 2.2 compliant

• 18Gbps Video Bandwidth

• Up to 4K2K@60Hz (YUV 4:4:4) of video resolution supported

• HDR, HDR10, HDR10+, Dolby Vision LLM, and HLG pass-through

• LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,

DTS96/24, DTS High Res, DTS-HD Master Audio, and DSD pass-through

• Transmission distance of up to 230ft/70m (4K30/1080P) or 131ft/

40m (4K60) via a single CAT6A cable

• Bi-Directional POC (Power over Cable) is supported when TX or

RX gets power, and the other end does not need an external

power supply

• Over 3.5mm Analog Audio De-Embedding at TX and RX

• EDID Management

• Bi-directional RS-232 signal pass-through, bi-directional IR signal

• Control, and USB2.0 signal transmission

• Compact design for easy and exible installation

• 1 × HDBaseT 3.0 Extender (Transmitter)

• 1 × HDBaseT 3.0 Extender (Receiver)

• 1 × IR Blaster Cable (1.5 meters)

• 1 × IR Receiver Cable (1.5 meters)

• 2 × 3pin-3.81mm Phoenix Connectors (Male)

• 4 × Mounting Ears

• 8 × Machine Screws (KM3*4)

• 1 × 24V/1A Locking Power Adapter

• 1 × User Manual

3. Package Contents

4. Operation Controls and Functions

Transmitter Panel

RS-232L/R OUTUSB HOSTHDMI INHDBaseT OUT DC 24V

TX RX

11 13 14 1510 127

SERVICE

LINK

IR IN IR OUT

EDID

1 2 3 4 5 6

POC

ON OFF

No. Name Function Description

1 Power LED The red LED is on when the Transmitter is powered on.

2 LINK LED

▪Light on: Transmitter and Receiver are in good connection

status.

▪ Light ashing: Transmitter and Receiver are in poor

connection status or connected to the same device.

▪ Light o: Transmitter and Receiver are not connected.

3 IR IN IR signal input port, connected to IR Receiver cable.

4 IR OUT IR signal output port, connected to IR Blaster cable.

5EDID DIP

switch

Used for EDID setting:

00-Copy display’s EDID (as factory default)

01-4K30 4:4:4

10-1080p60 4:4:4

11-1200p60 4:4:4

No. Name Function Description

6 SERVICE Firmware update port.

7HDBaseT

OUT

HDBaseT output port, connected to the HDBaseT IN port of

Receiver with a CAT6A cable. It is used for various signals

pass-through.

Data Signal

Indicator

(Yellow)

▪Illuminating: HDMI signal with HDCP.

▪Flashing: HDMI signal without HDCP.

▪Dark: No HDMI signal.

Link Signal

Indicator

(Green)

▪Illuminating: Transmitter and Receiver are in good

connection status.

▪Flashing: Transmitter and Receiver are in poor connection

status or connected to the same device.

▪Dark: Transmitter and Receiver are not connected.

10 HDMI IN HDMI signal input port, connected to signal source device.

11 USB HOST USB extension host port, connected to PC.

12 USB

DEVICES

Two USB device ports, connected to U disk, mouse or

keyboard.

13 L/R OUT Analog audio output port, used for audio de-embedding

output.

14 RS-232 RS-232 serial port, used for serial port command

transmission.

15 DC 24V

DC 24V/1A power supply input port.

Note that the extender supports POC function, it means

that either transmitter or receiver is powered on by 24V/1A

power adapter, the other one doesn’t need power supply.

16 POC switch Use the switch to turn on/o POC function.

SERVICE

LINK

IR IN IR OUT RX

RS-232L/R OUTHDMI OUTHDBaseT IN DC 24V

TX RX

123 4 5

11 12 13

67 8 10

POC

ON OFF

Receiver Panel

No. Name Function Description

1 Power LED Red LED indicates that the Receiver is powered on.

2 LINK LED

▪Light on: Transmitter and Receiver are in good connection

status.

▪ Light ashing: Transmitter and Receiver are in poor

connection status or connected to the same device.

▪ Light o: Transmitter and Receiver are not connected.

3 IR IN IR signal input port, connected to IR Receiver cable.

4 IR OUT IR signal output port, connected to IR Blaster cable.

5 SERVICE Firmware update port.

6 HDBaseT IN

HDBaseT input port, connected to the HDBaseT OUT port

of Transmitter with a CAT6A cable.

It is used for various signals pass-through.

No. Name Function Description

Data Signal

Indicator

(Yellow)

• Illuminating: HDMI signal with HDCP.

• Flashing: HDMI signal without HDCP.

• Dark: No HDMI signal.

Link Signal

Indicator

(Green)

• Illuminating: Transmitter and Receiver are in good

connection status.

• Flashing: Transmitter and Receiver are in poor

connection status or connected to the same device.

• Dark: Transmitter and Receiver are not connected.

9HDMI OUT HDMI signal output port, connected to HDMI display device.

10 USB

DEVICES

Two USB device ports, connected to U disk, mouse or

keyboard.

11 L/R OUT Analog audio output port, used for audio de-embedding

output.

12 RS-232 RS-232 serial port, used for serial port command transmission.

13 DC 24V

DC 24V/1A power supply input port.

Note that the extender supports POC function, it means

that either transmitter or receiver is powered on by 24V/1A

power adapter, the other one doesn’t need power supply.

14 POC switch Use the switch to turn on/o POC function.

IR Pin Denition

IR Receiver and Blaster pin’s denition as below:

IR RECEIVER

IR BLASTER

Power 12V

IR RECEIVER

IR BLASTER

5. Application Example

Transmitter

Receiver

PC1

Power Supply

CAT6A cable

Keyboard

IR Receiver IR Blaster

PC2TV

SERVICE

LINK

IR IN IR OUT

EDID

RS-232L/R OUTUSB HOSTHDMI INHDBaseT OUT DC 24V

TX RX

SERVICE

LINK

IR IN IR OUT

RS-232L/R OUTHDMI OUTHDBaseT IN DC 24V

TX RX

DVD or Blu-ray Player HDMI Matrix with

RS-232 function

LAN

Mouse

Speakers

Note: When the angle between the IR receiver and the remote

control is ± 45 °, the transmission distance is 0-5 meters; When the

angle between the IR receiver and the remote control is ± 90°, the

transmission distance is 0- 8 meters.

Table of contents

Other Monoprice Extender manuals

Monoprice

Monoprice Blackbird 43959 Operating manual

Monoprice

Monoprice Blackbird 8159 User manual

Monoprice

Monoprice VGA User manual

Monoprice

Monoprice Blackbird 21608 User manual

Monoprice

Monoprice 41097 User manual

Monoprice

Monoprice Blackbird Pro WiHD 39625 User manual

Monoprice

Monoprice 21905 User manual

Monoprice

Monoprice Audio-E Local User manual

Monoprice

Monoprice blackbird 24181 User manual

Monoprice

Monoprice 10224 User manual

Monoprice

Monoprice 24281 User manual

Monoprice

Monoprice 10224 User manual

Monoprice

Monoprice HDMI-LH User manual

Monoprice

Monoprice Blackbird 30915 User manual

Monoprice

Monoprice 27841 User manual

Monoprice

Monoprice KVM-LII User manual

Monoprice

Monoprice 21792 User manual

Monoprice

Monoprice 18784 User manual

Monoprice

Monoprice 31055 User manual

Monoprice

Monoprice Blackbird 4K Pro HDBaseT User manual

Monoprice

Monoprice Blackbird User manual

Monoprice

Monoprice Blackbird Pro WiHD 16049 User manual

Monoprice

Monoprice DVI-LH User manual

Monoprice

Monoprice 10247 User manual

Popular Extender manuals by other brands

SY HDBT-60T installation guide

Appsys ProAudio

Appsys ProAudio ADX-16 user manual

Atlona

Atlona RS232 user manual

IDK

IDK OPF-TH1000-A user guide

Enable-IT

Enable-IT 824WP quick start guide

Worx

Worx Landroid RadioLink WA0864 Get started

TP-Link

TP-Link TL-WA730RE user guide

Camplex

Camplex CMX-HDMI-SFPL user manual

SC&T

SC&T HE03-4K user manual

Marmitek

Marmitek MegaView70 user manual

Samsung

Samsung SCS-26UC4 user guide

Foxun

Foxun SX-GES24 operating instructions

MuxLab

MuxLab 500771 Operation manual

foxunhd

foxunhd SX-AEX01 operating instructions

TERK Technologies

TERK Technologies LFIRX2 owner's manual

Devolo

Devolo Audio Extender supplementary guide

Edimax

Edimax EW-7438RPn V2 instructions

Shinybow USA

Shinybow USA SB-6335T5 instruction manual