Monitor Audio VECTA V240 User manual
installation guide
Contents
Introduction 1
Vecta Mounts 2
V-MOUNT 2
Angled Wedge 3
V-CORNER 4
V-CORNER Back to back 5
Fitting the Loudspeaker 5
Finished Locations 6
Specifications 7
Guarantee 7
ENGLISH
Introduction
Welcome to Vecta a new weatherproof lifestyle loudspeaker that is just at home outside in the elements
thanks to its IP55 rating as it is indoors in a bar, lounge area, swimming pool, sauna, the list is endless.
We have used our highly acclaimed C-CAM technology to develop the 2 bass units and tweeters to give
any environment the Monitor Audio sound.
The flexibility doesn’t just end with the environments it can be used in, but also how it is fitted. There are
3 bracket options and 8 configurations available: Single corner mounting (wall or eaves), two back to back
on a wall using two of the corner brackets, square on to the wall, angled off the wall using the wedge and
standard bracket and from the ceiling using a pole and the cluster mount.
monitoraudio.com 1
Vecta Mounts
NOTE: All mounts are sold seperately. Choose the correct mount for your fixing configuration.
WARNING: Please ensure you are confident in providing a safe and secure fixing. Please
use appropriate fixings for the type of wall construction as no wall fixings are supplied.
V-MOUNT
The V-MOUNT is the mount used when fixing the loudspeaker square on to the wall either horizontally or
vertically. This is held in place using upto 4 fixing points - fixings not supplied. There is a cable through
hole to feed the cable through and into the terminals. Remove the insulation from the cable and clamp the
cable in place using the push down terminals.
Cable Through Hole.
Feed cable through and
feed around into terminals.
Wall Fixing Points
Use appropriate fixings
and screws for the wall it is
being fixed to. (4 in total)
Wall Fixing Points
Use appropriate fixings
and screws for the wall it is
being fixed to. (4 in total)
Loudspeaker Terminals.
Push down on the terminals
to clamp the cable in place.
Loudspeaker Fixing Bolt.
Secured from below, this
fixes the loudspeaker to
the bracket.
Bracket Cover.
When secured to the
wall, slide this over the
loudspeaker mounting
pole and press into place
to hide cables and wall
fixings.
Loudspeaker Mounting Arm.
This is the arm the
loudspeaker will sit on.
Teeth
Used to set the angle of
the loudspeaker and also
help grip it in place.
Vecta Installation Guide2
Angled Wedge
The wedge has a 32.5 degree angle to it and is used in conjunction with the V-MOUNT to angle the
loudspeaker off the wall when corner mounting (using the V-CORNER) or square to the wall is not suitable.
The combination of the wedge and angular adjustment of the speaker will allow up to 45 degrees of
adjustment. Like the V-MOUNT it can be used in both horizontal and vertical configurations.
Fixings are not supplied to secure the wedge to the wall. Only to secure the V-MOUNT to the wedge.
Angled Wedge.
Used to angle the
loudspeaker towards the
listening position when
fitting it square to the wall
isn’t desired. Attach this to
the wall using appropriate
fixings and then fix the
V-MOUNT to the wedge
using the supplied screws.
V-MOUNT.Bracket Cover Angled Wedge Screws.
Used to attach the
V-MOUNT to the wedge.
These are supplied.
NOTE: When adjusting the angle of the loudspeaker, always loosen the fixing bolt and lift
the loudspeaker off the teeth so as not to damage them.
monitoraudio.com 3
ENGLISH
V-CORNER
Single V-CORNER mounts can be used to fit the loudspeakers vertically into the corner of the walls or
horizontally in the corner of a wall and ceiling. It is also strong enough to just mount one side of the
bracket to an open sided wall or post. Feed the cable through any one of the three through holes and
using bare wire clamp the cable in place in the sprung, push down terminals.
Cable Through Hole.
Feed cable through and
around into terminals.
Wall Fixing Points.
3 on each side.
Use appropriate fixings
and screws for the wall it is
being fixed to.
NOTE: If the wall is a long
way off square, using one
side of the bracket to fix it
to the wall will still hold the
loudspeaker sufficiently.
Loudspeaker Terminals.
Push down on the terminals
to clamp the cable in place.
Loudspeaker Fixing Bolt.
Secured from below, this
fixes the loudspeaker to
the bracket. There is a
guide in the back of the
loudspeaker to help locate
the screwdriver in the bolt.
The bolt has a longer shaft
to aid installation.
Bracket Cover.
When secured to the wall,
slide this over the bracket
to hide cables and wall
fixings.
Teeth
Used to set the angle of
the loudspeaker and also
help grip it in place.
Vecta Installation Guide4
Loudspeaker Mounting Arm.
The is the arm the
loudspeaker will sit on.
V-CORNER Back to back
It is possible to mount a pair of V240’s next to each other using
2 corner brackets. This will give almost 180 degrees of sound
dispersion. If mounting them in this configuration, fix one side of the
first bracket to the wall. Align the second bracket to the first and
mark its fixing points. It might be beneficial to hold them together
with a small nut and bolt or cable tie (neither supplied). once fixing
points have been drilled, use the appropriate fixings and secure the
second bracket to the wall.
Fitting the Loudspeaker
Once the correct bracket has been fitted, the loudspeaker can then be mounted onto it.
Attaching it is simple, just align the bracket arm with the mounting location on the loudspeaker and slot it
into place. Once in place, the loudspeaker fixing bolt must be tightened to hold the loudspeaker securely
in place. There is a small recess in the back of the loudspeaker to align the screwdriver with the bolt.
The same method of fixing applies to all brackets.
Screwdriver Guide
This is to aid installation
and guide the screwdriver
to the fixing screw.
monitoraudio.com 5
ENGLISH
Vecta Installation Guide6
Finished Locations
Below are some examples of the product installed in finished locations use the brackets.
Horizontal or vertical flat on a wall Mounted with optional WedgeHorizontal or vertical flat on a wall
Mounted in a corner Mounted under eaves 2 x Mounted back to back
ENGLISH
monitoraudio.com 7
Specifications
Model V240
System Format 2-way (3 driver)
Frequency Response (-6dB) 70 Hz - 25 kHz
Sensitivity (1W@1M) 88 dB
Nominal Impedance 4 ohms
Minimum Impedance 4.01 ohms @ 240 Hz
Maximum SPL @1M 108 dBA (each)
Power handling (RMS) 100 W
Recommended Amplifier
Requirements (RMS) 25 – 100 W
Bass Alignment Sealed cabinet
Crossover Frequency 2.5 kHz
Connection Method Gold plated push terminals – attached to bracket
Environmental Protection
Rating IP55
Operating Temperature
Range -25 - 65°C / -13 - 149°F
Bracket Pivot Angle Wall: 25°. Wedge: Additional 32.5°. Combined Max: 45°.
Drive Unit Complement 2 x 4” Drivers featuring C-CAM metal cone technology
25mm (1”) Gold C-CAM dome tweeter
Dimensions (H x W x D) 336 x 243.2 x 150mm
13 1/4 x 9 9/16 x 5 7/8”
Product Weight 2.55Kg. 5lb 10oz
Finishes UV Resistant Black or White (Signal White, RAL 9003)
Guarantee
Both the craftsmanship and the performance of this product is guaranteed against manufacturing defects
for the period of five years from the date of purchase (see conditions in the Important Safety Instructions
booklet), provided that the product was supplied by an authorised Monitor Audio retailer under the
consumer sale agreement.
To help us find your warranty details within our customer database, should the need arise, please take a
few minutes to register your product(s) online at: monitoraudio.com.
Guide d'installation
This manual suits for next models
1
Table of contents
Languages:
Other Monitor Audio Speakers System manuals
Monitor Audio
Monitor Audio Shadow 50 User manual
Monitor Audio
Monitor Audio Silver 1 User manual
Monitor Audio
Monitor Audio Radius User manual
Monitor Audio
Monitor Audio MASS Satellite User manual
Monitor Audio
Monitor Audio Gold 50 User manual
Monitor Audio
Monitor Audio Bronze Series User manual
Monitor Audio
Monitor Audio Bronze Series User manual
Popular Speakers System manuals by other brands
Sondpex
Sondpex Active Speaker System and Digital Music... User manual and installation instructions
JVC
JVC NX-PN7 instructions
Marshall Amplification
Marshall Amplification AR-DM61-BT user manual
Yamaha
Yamaha NX-A01 - Speaker Sys Product bulletin
SE Audiotechnik
SE Audiotechnik I-LINE manual
Gemini
Gemini WRX-843 Series user manual