Molex 207125 Series User manual

A.S.04.03.15/ISSUE D

FILENAME: SD-69020-0500

ARBOR PRESS FIXTURE

PART No. 69020-0500

FOR MOLEX PRODUCT ENG. No. 90075 4 & 6 way

DESCRIPTION

This fixture is used to terminate 90075 4/4,6/4 & 6/6 way

connectors onto pre-cut and stripped cable.

FEATURES

1. This fixture can only be used in a standard Arbor Press part

No. 69020-0660.

2. For loose piece terminals only.

SPECIFICATION

SIZE: 100mm x 100mm x 20mm

WEIGHT: 3Kg

WORKING SERVICES: None

A.S.04.03.15/ISSUE D

FILENAME: SD-69020-0500

SET-UP

1) Fix upper block onto Arbor Press spindle and tighten locking

screw.

2) Place lower termination fixture onto mounting platform of

Arbor Press.

3) Make a few samples following the next section (operation)

and then check termination heights. If adjustment is

required see adjustments section.

OPERATION

1) Prepare cable in accordance with product specification

(e.g.: PS-90075).

2) Push pre-stripped cable into connector.

3) Insert connector into lower termination block.

4) Pull handle of Arbor Press down fully to terminate

connector.

5) Return handle to start position.

6) Release connector latch and remove cable assembly from

fixture.

A.S.04.03.15/ISSUE D

FILENAME: SD-69020-0500

ADJUSTMENTS

1) If termination height is incorrect then follow the procedure

below.

2) Loosen the stud nuts in the centre of the Arbor Press.

3) Loosen clamp bolt to column at the rear of the Arbor Press.

4) Adjust upper part of Arbor Press up or down using the nuts

on the central stud.

5) Re-tighten nuts and clamp bolt.

6) Recheck termination height.

MAINTENANCE

1) Keep fixture clean at all times.

2) Clean fixture with brush.

3) Oil moving parts weekly, when in use.

4) Store in a clean dry environment.

SPARE PARTS

Insertion Punch 4 way 69020-0505

Insertion Punch 6 way 69020-0506

Latching Punch 4 way 69020-0511

Latching Punch 6 way 69020-0512

A.S.04.03.15/ISSUE D

FILENAME: SD-69020-0500

QUALITY

Check termination quality against the Molex wire

termination specification for relevant product being

terminated e.g.: PS-90650.

A quality procedure should be in place to monitor output

from this fixture.

LIMITATIONS

This Arbor Press can only be used for product stated in

the description section of this leaflet.

This manual suits for next models

1

Table of contents

Popular Crimping Tools manuals by other brands

Panduit

Panduit CT-1000 Operation & instruction manual

JST

JST CS 10 instruction manual

Danfoss

Danfoss ET4200 Operator's manual

Tyco Electronics

Tyco Electronics PRO-CRIMPER III instruction sheet

TE Connectivity

TE Connectivity 2063528-1 instruction sheet

Tyco Electronics

Tyco Electronics 69156-1 instruction sheet

CRH

CRH CRL CBLHCT1 instruction manual

Emerson

Emerson Klauke ES 105CFM manual

KIMBALL MIDWEST

KIMBALL MIDWEST 27-798 Operating instructions manual

Danfoss

Danfoss ET4350 Operator's manual

Milwaukee

Milwaukee M18 Operator's manual

HOGERT

HOGERT HT1P169 user manual

Textron

Textron ESG105L instruction manual

Tyco Electronics

Tyco Electronics 90035-3 instruction sheet

Emerson

Emerson Klauke ES 20RMCCFB manual

Continental Refrigerator

Continental Refrigerator PC150HD quick start guide

TE Connectivity

TE Connectivity ERGOCRIMP 1-1579001-3 instruction sheet

Tyco Electronics

Tyco Electronics CERTI-CRIMP 90418-1 instruction sheet