4 Battery Instruction
The instruction shows how to charge and maintain the battery, some safety notices and the specification. Please
use the battery properly according to this instruction to prolong the battery life and its performance.
4.1 Battery Parameters
4.3 Charging step
●
Open the charging port cover, Make sure the charging port is clean and dry.
●
Connect the charger with the battery and the other end with power(100V-240V;50/60Hz), make sure the charging
indicator is on.
●
When the indicator light on the charger changes, indicating that the charging process is normal, otherwise check if the line
connection is good.
●
When the indicator on the charger has color change, it indicates that the battery has been filled to 99%, Please stop
charging; long time over charge will affect the battery life.
4.2 Battery Safety
Do not continue to use the battery when the following conditions occur:
The battery of the electric scooter should be used only with local law. Only for professionals to disassemble and maintain
the battery.
Odor or excessive heat; leak any substance; do not touch anything leaking from the battery.
Do not let children and animals touch the battery. Must unplug the charger before installing the battery or riding. In the
case of charging, it is very dangerous to do anything related to electric vehicles.
If you want the electric scooter to run most efficiently, the battery must be charged and used within the temperature range
indicated in the battery specifications.
Lithium batteries are considered dangerous and require local law to allow transportation.
The battery contains dangerous substances. Please do not open the battery . Do not insert anything into the battery.
Charging method 1:
Tips:
Charging method 2:
Charging
port Battery
interface
It is forbidden to charge a lithium battery that has been over-discharged. A battery that has been over-discharged has
a safety hazard and can only be scrapped.
Tip: When the internal temperature of the battery exceeds 45 °C, the battery is protected.
Do not charge the battery at high temperature (45 ° C) or Charge the battery in a high temperature (40 ° C) environment. Only
use the original charging equipment to charge the electric scooter.
13
Remove the battery to open the silicone charging port, plug the charger DC plug into the battery charging port; plug the
power cord into the charger, then connect the other port to the socket (100V-240V; 50/60Hz),
and confirm the charger indicator is on normally
Cover the charging port with the anti-dust cap in case some metal may touch the charging port and bring
short-circuit after charging finished.
14
Name
Parameter
Name
Parameter
Name
Parameter
Type
Li-ion battery
Working Temperature
0
℃-
35
℃
Store Time
（-
10
℃-
40
℃）
3 months (full charge)
Charging Time
3-4 hours Charging Temperature
0
℃-
35
℃
Initial Volume
5Ah/6.4Ah
Voltage
36V
Max Charging Voltage
42V
Max Charging Current
2A
