Mitutoyo PJ300 User manual
Quick Start Guide
How to install projection screen:
How to connect PJ300 to a video source:
Gaming system
HDMI* (best quality)
1- Using an HDMI cable (not included), connect the HDMI 1 or 2 input on the projector to the
HDMI output on your media player or computer.
2- Set the projector's Source to the connected HDMI input and use the controls on the
connected device to select and play media
Computer/laptop
HDMI* (best quality)
3- Using an HDMI cable (not included), connect the HDMI 1 or 2 input on the projector to the
HDMI output on your media player or computer.
4- Set the projector's Source to the connected HDMI input and use the controls on the
connected device to select and play media
VGA Cable*
1- Using a VGA cable, connect the VGA input on the projector to the VGA output on your
computer.
2- Set the projector's Source to PC and use the controls on the computer to select and play
media.
Smart Phones**
Casting Device*
-Most casting devices can connect to this projector via HDMI input and allow streaming content
controlled from your smartphone or by screen mirroring. Refer to the casting device user
manual for further instructions.
HDMI to Smartphone adapter*
-The process is the same as connecting an HDMI cable from the projector to a
computer/laptop or a gaming system.
*Note: this accessory is not included
**Note: Due to HDCP copyrights, certain streaming services may restrict viewing content with this
method of connectivity.
How to connect the speaker to PJ300:
Wireless connection
1- Enable Bluetooth on the included speaker (ISB150) or on another Bluetooth enabled speaker
2- Power on the projector (PJ300B) and make sure the projector's Bluetooth is ON from the Sound
menu in the projector’s settings.
3- The projector will begin searching for nearby Bluetooth devices to connect to and will
automatically initiate pairing. Note: disable Bluetooth on all receivers to which you do not wish
to connect.
4- When successfully paired, the Bluetooth receiver should indicate it is connected, usually with a
chime or tone and the projector will display the connected speaker or soundbar name on the
top right portion of the Main Menu screen
5- If either of the devices is reset, repeat the steps above to repair
Note: Bluetooth connectivity is only possible between the projector and external speakers. Smartphones
can’t connect to this projector via Bluetooth.
Wired connection
Using male-to-male AUX 3.5 mm cable (not included), connect one end to the projector and the other
end to the included speaker.
Other Mitutoyo Projector manuals
