Mitsubishi Electric e1101 User manual
E1101
Installation Manual
English
MA00779E, 2014-12
Foreword
Installation manual for E1101
Foreword
All E1000 are developed to satisfythe demands of human-machine
communication. Built-in functions such as displaying and controlling text,
dynamic indication, time channels, alarm and recipe handling are included.
The operator panel works primarily in an object-oriented way, making it easy to
understand and use. Configuration is carried out on a PC using the configuration
tool. The project can then be transferred and stored in the operator panel itself.
Various types of automation equipment such PLCs, servos or drives can be
connected to the E1000. In this manual, the term “the controller” refers to the
connected equipment.
This manual explains how to install the operator panel. Please refer to the
reference manual for further information.
Order no: MA00779E
Copyright © 2014-12 Mitsubishi Electric Automation Inc. All rights reserved.
The information in this document is subject to changewithoutnoticeandisprovidedasavailableatthe
time of printing. Mitsubishi Electric Automation Inc reserves the right to change any information without
updating this publication. Mitsubishi Electric Automation Inc assumes no responsibility for any errors
that may appear in this document. Read the entire installation manual prior to installing and using this
equipment. Only qualified personnel may install, operate or repair this equipment. Mitsubishi Electric
Automation Inc is not responsible for modified, altered or renovated equipment. Because the equipment has
a wide range of applications, users must acquire the appropriate knowledge to use the equipment properly
in their specific applications. Persons responsible for the application and the equipment must themselves
ensure that each application is in compliance with all relevant requirements, standards and legislation in
respect to configuration and safety. Only parts and accessories manufactured according to specifications set
by Mitsubishi Electric Automation Inc may be used.
MITSUBISHI ELECTRIC AUTOMATION INC SHALL NOT BE
LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE INSTALLATION, USE OR REPAIR OF THIS EQUIPMENT,
WHETHER ARISING IN TORT, CONTRACT, OR OTHERWISE.
BUYER'S SOLE REMEDY SHALL BE THE REPAIR, REPLACEMENT,
OR REFUND OF PURCHASE PRICE, AND THE CHOICE OF THE
APPLICABLE REMEDY SHALL BE AT THE SOLE DISCRETION OF
MITSUBISHI ELECTRIC AUTOMATION INC .
Mitsubishi Electric, MA00779E
Contents
Contents
1 SafetyPrecautions ....................................................... 4
1.1 General ........................................................... 4
1.2 UL and cUL Installation ......................................... 4
1.3 DuringInstallation .............................................. 6
1.4 DuringUse ....................................................... 6
1.5 Service and Maintenance ........................................ 6
1.6 Dismantling and Scrapping ..................................... 6
2 Installation ............................................................... 7
2.1 SpaceRequirements ............................................. 7
2.2 InstallationProcess .............................................. 7
2.2.1 ModeSwitches ...................................................10
2.2.2 ConnectionstotheController ..................................10
2.2.3 OtherConnectionsandPeripherals .............................10
3 TechnicalData ........................................................... 11
4 ChemicalResistance .................................................... 13
4.1 MetalCasing ..................................................... 13
4.2 Touch Screen and Overlay Material ............................ 13
4.2.1 AutotexF157/207 ...............................................13
4.2.2 TouchScreenSurface ............................................14
4.2.3 TouchScreenProtector ..........................................15
5 OperatorPanelDrawings .............................................. 16
5.1 CommunicationPorts ........................................... 16
5.2 E1101Outline ................................................... 17
6 Additional Installation Tips ............................................ 18
6.1 Grounding the Operator Panel ................................. 18
6.2 Ethernet Connection in the Panel .............................. 19
6.3 To Achieve Better EMC Protection ............................. 20
6.4 AmbientTemperature ........................................... 21
6.5 Safety ............................................................. 22
6.6 GalvanicIsolation ................................................ 23
6.7 Cable and Bus Termination RS485 ............................. 24
Mitsubishi Electric, MA00779E
Safety Precautions
1SafetyPrecautions
Both the installer and the owner and/or operator of the operator panel must read
and understand this installation manual.
1.1 General
•Read the safety precautions carefully.
•Check the delivery for transportation damage. If damage is found, notify the
supplier as soon as possible.
•The supplier is not responsible for modified, altered or reconstructed
equipment.
•Use only parts and accessories manufactured according to specifications of
the supplier.
•Read the installation and operating instructions carefully before installing,
using or repairing the operator panel.
•Neverallowfluids,metalfilingsorwiringdebristoenteranyopeningsinthe
operator panel. This may cause fire or electrical shock.
•Only qualified personnel may operate the operator panel.
•Storing the operator panel where the temperature is lower/higher than
recommended in this manual can cause the LCD display liquid to
congeal/become isotopic.
•The LCD display liquid contains a powerful irritant. In case of skin contact,
wash immediately with plenty of water. In case of eye contact, hold the eye
open,flushwithplentyofwaterandgetmedicalattention.
•Thefiguresinthismanualservesanillustrativepurpose. Becauseofthemany
variables associated with any particular installation, the supplier cannot
assume responsibility for actual use based on the figures.
•The supplier neither guarantees that the operator panel is suitable for your
particular application, nor assumes responsibility for your product design,
installation or operation.
•It is recommended to turn on and shut down the operator panel at least once
before installing any components/cards or before connecting the operator
panel to external devices, like for example serial devices.
1.2 ULandcULInstallation
Caution:
This section is only valid for UL labeled E1101 panels.
•This equipment is suitable for use in non-hazardous locations only.
[Combinations of equipment in your system are subject to investigation by
the local authority having jurisdiction at the time of installation].
•All devices have to be supplied by a Class 2 power supply.
Mitsubishi Electric, MA00779E 4
Safety Precautions
Warning:
Do not disconnect equipment unless power has been removed or the area is
known to be non-hazardous
AVANT DE DECONNECTER L’EQUIPEMENT, COUPER LE COURANT
OUS’ASSURER QUE L‘EMPLACEMENT EST DESIGNE NON DANGEREUX.
Warning:
Only UL and cUL approved expansion units are allowed to be connected to
the port designated “EXPANSION”. At the moment there are no such units
evaluated or allowed.
SEULES LES UNITÉS D'EXTENSION CERTIFIÉES UL ET
cUL PEUVENT ÊTRE RACCORDÉES AU PORT DÉSIGNÉ « EXPANSION ».
À L'HEURE ACTUELLE, AUCUNE UNITÉ DE CE TYPE N'A ÉTÉ TESTÉE
OU AUTORISÉE.
Warning:
Do not replace expansion unit unless power has been switched off or the area
is known to be non-hazardous.
NE REMPLACEZ L'UNITÉ D'EXTENSION QUE SI LE
COURANT A ÉTÉ COUPÉ OU SI LA ZONE EST JUGÉE NON DANGEREUSE.
•This product contains a battery; this must only be changed in an area known
to be non-hazardous.
•Replace the battery with a CR2450* battery. Use of another type of battery
may present a risk of fire or explosion.
*SeesectionTechnical Data
Warning:
Battery may explode if mistreated. Do not recharge, disassemble or dispose
of in fire.
LA BATTERIE PEUT EXPLOSER EN CAS DE MAUVAISE MANIPULATION.
NE LA RECHARGEZ PAS, NE LA DÉMONTEZ PAS ET NE LA JETEZ
PAS DANS LE FEU.
•For use on a flat surface of a type 4X enclosure indoor use only.
•Use minimum 75°C copper conductors only.
•To make wiring connections to the power supply connector, follow the table
with cable and torque specifications below:
Terminal Block Connector Wire Size TQ Lb.In.
X1/X100 Phoenix connectors AWG 30–12 5–7
X1/X100 Anytek connectors AWG 24–12 3.5
•ThesedevicesareClass2suppliedprogrammablecontrollers(industrialPCs)
for the use in industrial control equipment and are intended to be (front)
panel mounted (Type 1 and 4x for indoor use only).
Mitsubishi Electric, MA00779E 5
Safety Precautions
Caution:
TheenclosureprovidesadegreeofprotectionofatleastIP20,butwheninstalledinan
apparatus, it should meet IP54.
LE BOÎTIER OFFRE UN DEGRÉ DE PROTECTION D'AU MOINS IP20, MAIS
LORSQU'IL EST INSTALLÉ DANS UN APPAREIL, IL DOIT ÊTRE DE CLASSE IP54.
1.3 During Installation
•The operator panel is designed for stationary installation on a plane surface,
where the following conditions are fulfilled:
–no high explosive risks
–no strong magnetic fields
–no direct sunlight
–no large, sudden temperature changes
•Install the product according to the accompanying installation instructions.
•Ground the product according to the accompanying installation instructions.
•Only qualified personnel may install the operator panel.
•Separate the high voltage, signal and supply cables.
•Make sure that the voltage and polarity of the power source is correct before
connecting the product to the power outlet.
•Peripheral equipment must be appropriate for the application and location.
1.4 During Use
•Keep the operator panel clean.
•Emergency stop and other safety functions may not be controlled from the
operator panel.
•Do not use excessive force or sharp objects when operating the touchscreen.
1.5 Service and Maintenance
•Only qualified personnel should carry out repairs.
•The agreed warranty applies.
•Before carrying out any cleaning or maintenance operations, disconnect the
equipment from the electrical supply.
•Clean the display and surrounding front cover with a soft cloth and mild
detergent.
•Replacing the battery incorrectly may result in explosion. Only use batteries
recommended by the supplier. During the warranty period, the battery needs
to be replaced by an authorized Mitsubishi Electric service center.
1.6 Dismantling and Scrapping
•The operator panel or parts thereof shall be recycled according to local
regulations.
•The following components contain substances that might be hazardous
to health and the environment: lithium battery, electrolytic capacitor and
display.
Mitsubishi Electric, MA00779E 6
Installation
2Installation
2.1 Space Requirements
•Installation plate thickness: 1.5 - 9.0 mm (0.06 - 0.35 inch)
•Space requirements when installing the operator panel:
58 mm
228 mm
302 mm
100 mm
(4.0 inch)
100 mm
(4.0 inch)
50 mm
(2.0 inch)
50 mm
(2.0 inch)
100 mm
(4.0 inch)
(2.28 inch)
(11.89 inch)
(8.98 inch)
Caution:
The openings on the enclosure are for air convection. Do not cover these openings.
2.2 Installation Process
1. Unpack and check the delivery. If damage is found, notify the supplier.
x 13
Panel cut out 264.5 x 206.0 mm
(10.41 x 8.11 inch)
Note:
Place the operator panel on a stable surface during installation.
Dropping it or letting it fall may cause damage.
Mitsubishi Electric, MA00779E 7
Installation
2. Place the panel cut out where the operator panel is to be situated, draw along
the outer sides of the holes and cut according to the markings.
3. Secure the operator panel in position, using all the fastening holes and the
provided brackets and screws:
x 13
0.5 - 1.0 Nm
Mitsubishi Electric, MA00779E 8
Installation
4. Connect the cables in the specified order, according to the drawing and steps
below.
Caution:
•The operator panel must be brought to ambient temperature before it is started
up. If condensationforms, ensure that the operator panel is dry before connecting
it to the power outlet.
•Ensure that the operator panel and the controller system have the same electrical
grounding (reference voltage level), otherwise errors in communication may
occur.
•Ensure that the voltage and polarity of the power source is correct.
•Separate high voltage cables from signal and supply cables.
•Shielded communication cables are recommended.
24V DC
RS422/RS485 24V DC
1
CF CARD
B
A
C
D
RS232
Controller
Power
Ethernet
–Connect cable A.
–Connect cable B, using an M5 screw and a grounding conductor (as short
as possible), that is sized correctly according to local electrical codes.
–Connect cable C.
–Connect cable D.
5. Carefully remove the laminated film over the operator panel display, to avoid
static electricity that could damage the panel.
Mitsubishi Electric, MA00779E 9
Installation
2.2.1 Mode Switches
All mode switches must be in OFF position during operator panel use.
Themodeswitchesshouldnotbetouchedunlessbyqualifiedpersonnel.
1
24V DC
CF CARD
COM 1
RS422
RS485
COM 2
RS232
10/100
EXPANSION
BUSY
MODE
1 2 3 4
ON DIP
MODE
1 2 3 4
ON DIP
2.2.2 Connections to the Controller
For information about the cablestobeusedwhenconnectingthe operator panel to
the controller, please refer to the help file for the driver in question.
2.2.3 Other Connections and Peripherals
Cables, peripheral equipment and accessoriesmustbesuitablefortheapplication
and its environment. For further details or recommendations, please refer to the
supplier.
Caution:
When using a compact flash card, do not remove the card when the busy indicator is
illuminated.
Mitsubishi Electric, MA00779E 10
Table of contents
Other Mitsubishi Electric Monitor manuals
Mitsubishi Electric
Mitsubishi Electric LDT323V User manual
Mitsubishi Electric
Mitsubishi Electric 56P-QF60LCU User manual
Mitsubishi Electric
Mitsubishi Electric LDT323V User manual
Mitsubishi Electric
Mitsubishi Electric MDT70IS User manual
Mitsubishi Electric
Mitsubishi Electric DR854 User manual
Mitsubishi Electric
Mitsubishi Electric TFV6708SKHKW User manual
Mitsubishi Electric
Mitsubishi Electric 2107e User manual
Mitsubishi Electric
Mitsubishi Electric LDT55IV User manual
Mitsubishi Electric
Mitsubishi Electric MDT652S User manual
Mitsubishi Electric
Mitsubishi Electric DV171J Configuration guide
Mitsubishi Electric
Mitsubishi Electric LDT462V User manual
Mitsubishi Electric
Mitsubishi Electric LDT55IV User manual
Mitsubishi Electric
Mitsubishi Electric MDT65IS User manual
Mitsubishi Electric
Mitsubishi Electric DT1151 User manual
Mitsubishi Electric
Mitsubishi Electric LDT421V User manual
Mitsubishi Electric
Mitsubishi Electric LDT422V (BR931) User manual
Mitsubishi Electric
Mitsubishi Electric MLM400 User manual
Mitsubishi Electric
Mitsubishi Electric MDT42IS User manual
Mitsubishi Electric
Mitsubishi Electric LDT551V User manual
Mitsubishi Electric
Mitsubishi Electric PD-4265 User manual
