Mistral MSF-1600M User manual

USER’S MANUAL

STAND FAN

MODEL: MSF-1600M

Please read the instruction manual carefully before

operating the appliance

GENERAL SAFETY PRECAUTIONS

1. This appliance is intended for indoor and household use only; not for

outdoor, commercial and industrial use.

2. Do not place the appliance on or near to a gas or electric burner,

heated oven, or near to flammable materials.

3. To protect against fire, electric shock and injury, do not immerse

power cord, plug or appliance in water or other types of liquid.

4. The appliance should never be left unattended while it is connected to

the mains electricity supply.

5. Use only original accessories supplied.

6. Educate children about the danger and safety rules associated with

operating electrical equipment.

7. Never let children use electrical equipment without adult supervision.

8. Ensure the voltage indicated on the Rating Label corresponding to the

local power supply.

9. Always unplug the product from the wall socket when it is not in use.

10. Do not unplug the product from the wall socket with wet hand.

11. Do not pull on the power cord to remove the plug from wall socket.

12. Do not coil the power cord too tightly around the air cooler, to prevent

damage to the power cord and appliance.

13. Do not let power cord hang over the edge of table or touches any hot

surfaces.

14. Ensure that the product is fully assembled before plugging it into the

wall socket.

15. Do not cover the air inlet or outlet of the appliance as this may cause

damage to the motor.

16. Do not insert or allow objects to enter any ventilation or exhaust

opening as this may damage the product and could cause an electric

shock or fire.

17. Do not leave the appliance operating unattended for any extended

period of time.

18. This appliance should not be used by the physically challenged, slow

response or mentally disabled people (including children) unless

guidance is provided during operation.

PARTS IDENTIFICATION

1. Central plate

2. Front Guard

3. Blade Cap

4. Blade

5. Rear Guard

6. Guard Knob

7. Front Motor Cover

8. Motor

9. Rear Motor Cover

10. Rotary Switch

11. Oscillation Knob

12. Pivot

13. Power Cord with Plug

14. Supporting Pole

15. Screw A

16. Inner Tube

17. Screw B

18. Outer Tube

19. Base Cover

20. Base

21. Pole Tightened

22. Rubber Stand

SPECIFICATIONS

Rated Voltage

220-240V~

Rated Power

60W

Frequency

50/60Hz

Blade Size

16”

ASSEMBLY OF STAND FAN

Attach the rear guard to the front side of the motor; fasten the guard

interlocking nut by turning it clockwise until the guard is secured firmly in

place.

Mount the fan blade onto the motor shaft; fasten the blade knob by

turning anti-clockwise firmly.

Installing the front guard:

- Open the front guard clip and attach the hook to the rear guard.

- Push the round edges of front guard to fit it securely into the rear

guard.

- Lock the clip.

Installing the base:

- Insert the outer tube to the base unit firmly. Reverse the whole unit and

secure the outer tube by fitting the molded securing knob from the

bottom of the base unit.

- Connect and fix the inner tube to the outer tube.

- Ensure the outer tube is completely interlocked with the base unit.

- Insert the panel to the inner tube and lock it into position by turning the

panel screw clockwise. Loosen the height adjustment knob to extend

the inner tube to the required height and then tighten the securing

knob.

OPERATION OF STAND FAN

Connect the plug into a power supply socket and switch on the power.

Switch on the fan by turning the speed switch at any of the “1”, “2” or “3”

settings.

Turn the switch from “1”, “2” or “3” to adjust the fan speed from

Low-Medium-High.

To stop the fans, turn the speed switch to the “0” position.

To tilt the fan, always ensure that the fan is in off position and wait until

the blade has completely stopped for safety reasons. Hold the stand

firmly with one hand and move the guard gently upwards or downwards.

The oscillation knob is positioned at the top rear side of the motor

housing. Press the knob down to make the fan oscillate or pull it up to

stop the oscillation.

To adjust the height of fan, always ensure that the fan is at off position

and wait until the blade has completely stopped for safety reason. Hold

the inner tube firmly and loosen the height adjustment knob, then push

down or pull up the inner tube to adjust the fan height.

CLEANING & MAINTENANCE

1. Always ensure that the power supply is OFF and the power cord is

unplugged from the power supply and wait until the blade has completely

stopped before cleaning.

2. Wipe the surfaces of the fan, the base and the fan blade with a soft

damp cloth. Never use any corrosive cleaning solution.

3. Do not allow the motor or other electrical components to be exposed to water

4. For proper storage, always place the fan in a low humidity environment.

THIS APPLIANCE IS STRICTLY FOR

HOUSEHOLD USE ONLY

Distributed by:

KHIND ALLIANCES SDN BHD (811092-W)

No.2, Jalan Astaka U8/82, Seksyen U8,

Bukit Jelutong, 40150 Shah Alam,

Selangor D.E., Malaysia.

Tel: 603- 7839 2000 Fax: 603-7845 0300

Customer Careline: 1300 8000 32

Website: www.khindalliances.com | www.mistral.com.my

Email: kas.inquiry@khind.com

Table of contents

Other Mistral Fan manuals

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual