Mindeo MP80 Series User manual

Other manuals for MP80 Series

1

Popular Barcode Reader manuals by other brands

POSMicro

POSMicro Datalogic PowerScan D7100 manual

Marson

Marson MT780 Integration guide

NCR

NCR RealPOS user guide

Motorola

Motorola SE3300 Integration guide

Element

Element P130BT user manual

Motorola

Motorola Symbol LS3008 Product reference guide

Meec tools

Meec tools OBD-II / VAG operating instructions

SICK

SICK CLP 100 operating instructions

Royal Tag SA

Royal Tag SA I-Read user manual

Welch Allyn

Welch Allyn IMAGETEAM 3800 user guide

Meteor

Meteor 8310 user manual

Denso

Denso BHT-500B user manual

Datalogic

Datalogic Heron HD3130 Quick reference guide

Motorola

Motorola MP6000 Integrator guide

Newland

Newland NLS-HR15-BT user guide

ARTDEV

ARTDEV AS-1310 quick guide

Aopos

Aopos AS290 user manual

ENS

ENS 367-5455 installation instructions

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MP80xx_QG_EN_V1.2.

MP80xx Image Platform Quick Guide

Notice

Parts of the scanner

① Exit window

② Camera push button

③ LED

④ Beeper push button

⑤ Beeper

⑥ Hanging holes

⑦ USB interface

⑧Auxiliary interface for

handheld scanner, etc

⑨ Host interface

Returning default parameters and listing version information

Default value initialization

Firmware version list

Scan mode (Alternative)

Good-read off (Default)

Timeout off

Installing the cable

1. Switch off the host system;

2. Refer to the below pictures, connect the host with the image platform based on different

cables;

3. Ensure that all connections are secure.

4. Switch on the host system. If the installation is successful, the beeper will beep and LED

will light.

PS2 cable

RS232 cable

USB cable

Programming instruction and example

Two programming modes have been provided as bellows:

Single-scan setting

Scan the appropriate barcode on

the right.

Example: to set Flow control to be XON/XOFF.

Multiple-scan setting

Scan “Option bar code”

Scan “The 1st character of option”

Scan “The 2nd character of option”

Scan “END”

Example: to set Flow control to be XON/XOFF.



A standard packing includes an image platform, a 5V adaptor, a USB cable and a

CD (or a user manual).



Accessories include a stand, a RS232 cable and a PS2 cable.



Use a piece of dry and soft cloth when cleaning the image platform is in need.

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: MP80xx_QG_EN_V1.2.

Reading techniques

1. Move the barcode to close to the image platform.

2. In general, the reading range of the image platform is limited to 2-8cm regardless of the

size of the minimal element of the barcode.

3. On a successful reading, the beeper will beep and the LED will light. If no barcode closes

to the image platform in a moment, the image platform will go to sleep.

Field of view

Figure 1-1 Field of view

Figure 1-2 Field of view –Front view

Assembling the stand

Figure 2-1

Figure 2-2

Figure 2-3

Figure 2-4

1. As shown in Figure 2-1, plug in two connection-arms to the two associated notches on the

bottom of the image platform.

2. As shown in Figure 2-2, well connect the image platform with the stand by tightening the

single screw.

3. As shown in Figure 2-3, adjust the image platform forward/backward for a desired position.

4. As shown in Figure 2-4, if you want to fix the stand on a table or other platform, you can

remove two plastic stopper on the stand (see ①), then fix the stand with a table with

appropriate screws.