■eye movement sensors are placed on each eye. This allows you to more fully
track the sleep pattern, since not always in the REM (rapid eye movement) phase,
both eyes move simultaneously.
■full-color RGB LEDs are used for issuing light tips, allowing you to set the
color of the light tip and thereby reduce the addiction to one color. In addition, this
solution allows the mask to be used in other applications - playback of audio-visual
sessions for falling asleep or audio recordings made using AudioStrobe® technology
with a strobe signal frequency of 19200 Hz. *
■play WAV and MP3 audio files before bedtime (as relaxation music) and after
bedtime ends (Alarm clock).
■dictaphone with high sound quality (16 bit) and the ability to record, listen
and delete records in the device itself. Recordings are formed as WAV files and are
ready to be directly played as prompts, before and after highlights.
■real time clock. They allow you to set the usual time in the device and record
all events (start of sleep, triggering of sensors, end of sleep or interruption of
monitoring), with reference to this time. Events are displayed and recorded in
special LOG files, which can then be easily viewed with a regular text editor or
processed by drawing up a sleep diagram.
■the device has a head movement sensor (accelerometer) with an adjustable
response threshold. Information about head movement is not only noted in the
events of the LOG file, but also allows, with appropriate setting, to interrupt the
issuance of prompts from the device. This information also makes it possible to
distinguish between triggering when the mask is accidentally displaced in front of
the eyes during head movement and eye movement during sleep.
■the ability to work as a USB drive when connected to a computer via a USB
cable, which allows you to quickly view LOG files about a past dream, as well as
download or delete music files and voice prompts.
■there is an LED indication of the operation of the Wi-Fi access point or the
mode of replacing the firmware, as well as the operation of the charger. During
operation (during monitoring or when playing music and prompts), the indication is
made by backlighting the «Enter/Start» button.
■all files for the device operation are located on a microSD memory card,
which is installed on top of the device and is easily accessible. However, the device
can work without a memory card, respectively, events during sleep will not be
recorded in LOG files, as well as voice prompts and music will be recorded and
played.
■for sound output there is a built-in speaker and a 3.5 mm stereo audio jack,
when headphones are connected to which the speaker is disabled. The mask has
loops on the headband through which the headphone wire can be put on so that it
does not fall on the face.
■there is also a vibrating call with adjustable intensity, used to issue a prompt
in sync with the light.
■the device contains a Li-Pol (lithium polymer) battery with a capacity of 800
mAh and a built-in charger from a USB socket.
