Milenta Ultimo Plus FP14201A User manual
Instructions Manual 1
Food Processor Ultimo Plus FP14201A
Instructions Manual
2 Instructions Manual
Safety instructions
• Before using this appliance, read the user
instructions carefully.
• Keep these instructions, warranty card, purchase
receipt and, if possible, the box, together with
inner packaging.
• This appliance is only for domestic use, and not
for commercial use.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
• Always disconnect the appliance from the supply
if it is left unattended and before assembling,
disassembling or cleaning.
• Do not allow children to use the appliance
without supervision.
• Inspect the power cable and appliance regularly.
If any defect is found, do not operate.
• Do not attempt to repair the unit yourself, it must
be repaired by qualified technicians to avoid any
hazard.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or a qualified person in order to avoid a hazard.
• Keep appliance and cable away from direct
radiant heat from the sun, from damp, from
sharp edges and other dangers
• Never use your appliance without paying
attention! Always unplug the unit when not in
use, even for a moment.
• Never use any accessories or parts from other
manufacturers.
• Do not use outdoors.
• Never immerse the unit in water or any other
liquids, or come into contact with them. Do not
use it with wet hands.
• If the appliance should become wet or damp,
remove plug from mains socket immediately. Do
not put your hands in the water!
• Use this appliance only for its intended purpose.
• Never touch the rotating tools while still in
motion; always wait for them to stop.
• Never use this appliance to mix or stir anything
other than foods.
• The blades and discs are very sharp, handle with
care.
Always hold the knife blade shaft and do not touch
the cutting edge when handling and cleaning.
• Always remove the knife blade before pouring
contents from the bowl.
• Keep hands and utensils out of the processor
bowl and blender jug whilst connected to the
power supply.
• Switch off and unplug:
* before fitting or removing parts
* after use
* before cleaning
• Never use your fingers to push food down the
feed tube. Always use the pusher supplied.
• Before removing the processor bowl, blender or
miller from the power unit:
* switch off;
* wait until the attachment / blades have
completely stopped;
* Be careful not to unscrew the blender jug or
miller from the blade unit.
• Allow hot liquids to cool before blending in the
blender - if you haven’t fitted the lid securely and
it comes off, you could get splashed.
• Do not use the safety lock to operate the
processor, such as turning off the appliance by
removing the bowl or lid. Always use the on/off
speed control.
• This machine will be damaged and may cause
injury if the interlock mechanism is subjected to
excessive force.
• Don’t let children play with this machine.
• Never use a damaged machine. Get it checked
or repaired: see ‘service’.
• Don’t let excess cord hang over the edge of a
table or worktop or touch hot surfaces.
• Do NOT operate without cover and pusher.
• Do NOT remove cover until blade stops turning.
Thank you for choosing products
Thank you for choosing products
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
Before using for the first time
1. Remove all packaging including the plastic blade covers from the knife blade. Take care the blades are very
sharp. These covers should be discarded as they are to protect the blade during manufacture and transit only.
2. Wash the parts see ‘cleaning’
3. Store excess power cord under the appliance.
Instructions Manual 3
Parts description
1. Main unit
2. Processor bowl
3. Processor drive shaft
4. Processor bowl lid
5. Feed tube
6. Pusher
7. Safety interlock
8. Cord storage
9. Pulse control
10. Speed control
11. Measuring cup
12. Lid
13. Blender jug
14. Sealing ring
15. Blade assembly unit
16. Juice cone
17. Juice sieve
18. Juice tank with drain
19. Juicer drive shaft
20. Miller cup
21. Sealing ring
22. Miller blade unit
23. Stainless steel julienne
disk (not included)
24. Coarse Stainless steel
slicing/shredding disk
25. Fine Stainless steel
slicing/shredding disk
26. Plastic assist blade
27. Plastic dough blade
28. Stainless steel blade
29. Egg beating disk
30. Spatula
31. Food Tray (not included)
4 Instructions Manual
Built-in safety lock
This function ensures that user can only switch the appliance on when the accessories have been
placed on the unit in correct position. When the accessories have been fixed properly, the unit can
only be switched on. (i.e. Built-in safety lock function is disabled at this moment)
Use the appliance
To use your food processor
1.Fit the processor bowl onto the main unit and
place the handle towards the back.
2. Place the processor drive shaft onto the
motor drive shaft.
3. Then fit the suitable disk or blade onto the
processor drive shaft.
Caution: Always fit the bowl and attachment onto
the appliance before adding ingredients.
4. Fit the lid and turn clockwise until it locks -
ensuring the top of the drive shaft locates into
the centre of the lid.
5. Turn the processor bowl clockwise until it
locks.
Caution: Do not use the lid to operate the processor,
always use the on/off speed control. The processor
won’t work if the bowl and lid are fitted incorrectly.
Use the pulse control for short bursts. The
pulse will operate for as long as the lever is
held down.
6. Switch on and select a speed.
7. Reverse the above procedure to remove the
lid, attachments and bowl.
Attention: To remove the lid from the processor
bowl, the processor bowl must be unlocked
from main unit first.
Caution: Always switch off before removing the lid.
Important
Your processor is not suitable for crushing or
grinding coffee beans, or converting granulated
sugar to caster sugar.
1
5
2
3
4
Instructions Manual 5
Choosing a speed for all functions
Tool / attachment Function Speed
Egg beating disc Egg whites 1
Egg & sugar for sponges 1
Cream (1L) 1
Plastic dough blade Yeast dough 2
Discs - slicing / julienne /
shredding Solid food such as carrots, potatoes 2
Softer food such as cucumbers, tomatoes
(400g) 1
Citrus juicer Press citrus fruits 1
Blender Liquid eg. milkshakes, soups, sauces and
mayonnaise 2
Miller All processing 2
Hints
1. Please mix 500g flour with 250g water as maximum quantity for our appliance. Do not re-
mix the formed yeasted dough or leave ingredients stay long in the bowl as it may overload
the processor.
2. To ensure long product-life, do not operate the machine for more than 1 minute when
kneading dough. Please wait for at least 2-3 minutes before operating the processor again.
6 Instructions Manual
Using the attachments
See chart above for speed of each attachment.
Blades / Discs placement
Plastic dough blade /
Stainless steel blade
Stainless steel blade is the most versatile of all the attachments. The length of the processing time
will determine the texture achieved. For coarser textures use the pulse control.
Hints
Plastic dough blade
• Place the dry ingredients in the bowl and add the liquid via the feed tube whilst the appliance
is running.
• Process until a smooth elastic ball of dough is formed, this will take 45 - 60 sec.
• Re-knead by hand only. Re-kneading in the bowl is not recommended as it may cause the
processor to become unstable.
Warning: Please do not use the plastic dough blade with plastic assist
blade together. The appliance will be overloaded and may be damaged.
Assist plastic blade
Coarse slicing /
shredding disc
Julienne Disc
Stainless
steel blade
Fine slicing /
shredding disc
Egg beating
disc
Stainless steel blade
• Cut food such as meat, bread, vegetables into cubes approximately 2cm before processing.
• When making pastry, cut the frozen fat into 2cm cubes first.
• Take care not to over-process.
• Plastic assist blade can be used together with stainless steel blade to provide better performance.
Instructions Manual 7
Egg beating disc
Use for light mixtures only e.g. egg whites, cream, condensed milk and for whisking eggs and sugar
for fatless sponges. Heavier mixtures such as fat and flour will damage it.
Reversible stainless steel slicing / shredding discs – coarse / fine
Use the slicing side for cheese, carrots, potatoes, cabbage, cucumber, beetroot and onions.
For coarse slicing (Part 21)
For coarse shredding (Part 21)
Hints
• Best results are obtained when the eggs are at room temperature.
• Ensure the bowl and whisks are clean and free from grease before whisking.
Face upward
Face upward
For fine slicing (Part 22)
For fine shredding (Part 22)
Face upward
Face upward
Use the shredding side for cheese, carrots, potatoes and foods of a similar texture.
8 Instructions Manual
Hints
• Usefreshingredients
• Whenusingthediscs,placeingredientshorizontally.
• Whenslicing:Rawfoodplacedatslopeinfeedtubeprovideslargercrosssectionarea
processedfood.
Neverputyourngersinthefeedtube.
Stainless steel Julienne disc
Usetocut:potatoesforJuliennestyleFrenchfries;rmingredientsforsalads,garnishes,casseroles
andstirfries(e.g.carrot,cucumber).
For Julienne(Part20)
Faceupward
Safety
• Neverremovetheliduntilthecuttingdischascompletelystopped.
• Handlethecuttingdiscswithcare-theyareextremelysharp
Instructions Manual 9
To use your blender
1.Assure the sealing ring is placed properly onto the blade assembly
unit.
2. Screw the blade unit into the jug.
3. Put the measuring cup in the lid, then turn.
4. Lock the lid onto the jug
5. Place the jug onto the main unit and turn to lock.
6. Select the speed by turning the control knob or press the Quick-
select button.
Hints
• When making mayonnaise, put all the ingredients, except the
oil into the blender. Then with the machine running, pour the oil
into the measuring cup and let it run through.
• Thick mixtures, e.g. pates and dips, may need scraping
down. If it’s difficult to process, add more liquid.
• When crushing ice, add 15ml (1tbsp) water to 6 ice cubes.
Use the pulse control.
Important
• Allowhotliquidstocoolbeforeblending–ifyouhaven’tttedthe
lidsecurelyanditcomesoff,youcouldgetsplashed.
• To ensure the long life of your blender, never run it continuously
for longer than 3 minutes. Switch off as soon as you’ve got the
right consistency.
• Don’t process spices - they may damage the plastic.
• The machine won’t work if the blender is fitted incorrectly.
• Don’t use the blender as a storage container. Keep it empty
before and after use.
• Never blend more than 1.5 liters - less for frothy liquids like
milkshakes.
1
2
5
4
3
10 Instructions Manual
To use your juicer
This juicer is designed for making citrus juice (e.g. oranges, lemons, grapefruits…etc).
Important
Use low speed for juicing.
1. Place the juicer drive shaft and the juice
tank onto the main unit
2. Turn the juice tank clockwise to lock into the unit.
3.Place the juicer cone at
the centre of the tank and
connect with the juicer
drive shaft.
Table of contents
Languages:
